• Proceedings of the KIPE Conference
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.401-402
• /
• 2016

This paper presents interleaved bi-directional LDC(Low DC-DC converter) with soft-switching for 48V system of Mild-HEV(Hybrid Electric Vehicles). The proposed LDC is composed of interleaved bi-directional converter and small resonant inductor and capacitors. Comparing the conventional converter, the proposed LDC improves the problem of switching loss by employing soft-switching. In this paper, mode analysis is described in detail for operating the soft-switching. The proposed LDC is verified by PSIM simulation.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.97-98
• /
• 2013

본 논문에서는 2차 측에 Current-Doubler 정류방식을 적용한 LLC 직렬 공진 컨버터를 제시한다. 일반적으로 LLC 직렬 공진 컨버터에 경우 2차 측에는 유도 성 부하를 사용하지 않는다. 2차 측에 유도 성 부하가 존재하는 경우 방식이 바뀌게 되어, 이는 더 이상 LLC 직렬 공진 컨버터의 특성을 갖지 않기 때문이다. 제안하는 논문에서는 2차 측 출력 인덕터를 Common Mode Choke로 구성한 회로를 수학적인 해석을 통해 증명하고, 이를 바탕으로 Matlab / Simulink를 이용하여 타당성을 검증 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제4권5호
• /
• pp.397-404
• /
• 1999

In this paper, several control methods for the discontinuous mode PWlvl-SRC are investigated with the l linearized small signal model. In order to analyze the stability and dyncunic characteristics of the controlled s system, the root locus as a function of the normaliz떠 output current(]\iOC) for a given normalized output v voltage(NOV) is employed. FurLhem10re, in this paper, the “Optimal trajectory control of PWM-SRC" is newly p propos(xl and its good dvnamic performances are evaluated with other four control laws.laws.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2016-2019
• /
• 1997

To solve the low efficiency problem of low-voltage power supplies, it has been studied to replace the schottky barrier diode with the MOSFET synchronous rectifier. In this paper, Phase Shift-Controlled Clamp Mode Zero Voltage Switching-Multi Resonant Converter with Synchronous Rectifier (PSC CM ZVS-MRC with SR) is presented to achieve high efficiency in low-voltage power supplies. The characteristics analysis of synchronous rectifier is established by using the MOSFET equivalent circuit and efficiency comparison is established between the Synchronous Rectifier and the schottky barrier diode. To verify the validity of the analysis, 33W(3.3V, 10A) PSC CM ZVS-MRC with self-driven synchronous rectifier at switching frequency of 1MHz is designed and tested. And it is confirmed that the experimental results are well consistent with the theoretical results. The maximum efficiency of the converter is 83.4% at full load, which is 3.3% higher than conventional schottky diode rectification.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.1993-1998
• /
• 1997

This paper presentes a novel single-phase unity power factor rectifer, which features Critical Conduction Mode and ZVS. The reduced conduction losses are achieved by the employment of a single converter instead of the typical configuration composed of a front end rectifier followed by a boost converter. Theoretical analysis, a design example and experimental results of a 300 converter with $127V_{rms}$ input voltage and 400 VDC output voltage are presented.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.450-452
• /
• 1996

In this paper, the authors propose a DC-DC boost converter of high efficiency by partial resonant switching mode, the switching devices in a proposed circuit are operated with soft switching and the control technique of those is simplified for switch to drive in constant duty cycle. The circuit has a merit which is taken to increase of efficiency, as it makes to a regeneration at input source of accumulated energy in snubber condenser without loss of snubber inconventional circuit. The proposed converter is deemed the most suitable for high power applications where the power switching devices are used.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.89-92
• /
• 2001

Silent gas discharge method has been widely applied for ozone production, ultraviolet light and UV laser generation. Since ozone and ultraviolet applications have tendency to spread widely in industry, the development of efficient and low-cost power supply for such systems is a task of great impotency. This paper introduces high-frequency inverter type mode power supply designed for ozone generation tube and ultraviolet generation excimer lamp and considerations on this inverter and pulse density modulation control strategy applied in it.

• Journal of the Korean Ceramic Society
• /
• 제24권5호
• /
• pp.470-476
• /
• 1987

The system of 0.1Pb(Mg1/3N2/3)O3-yPbTiO3-zPbZrO3 piezoelectric ceramics was made in the radial model disk and ring dot type filter. The resonant frequency(fr) variations were investigated for 100 hours and the temperature range from 20$^{\circ}C$ to 100$^{\circ}C$. As the results, the morphotropic phase boundary was supposed to be the composition of 45 y 50 and 40 z 45. The best characteristic of againg effect, after 10-hours, was composed of y, z=45. The stabilized characteristic of temperature varition, to become 0.1% up to 100$^{\circ}C$, was composed of y=50 and z=40. The bandwidth was broadened with increasing the electromechanical coefficient(kp), and the filter characteristics was approached ideal mode with increasing mechanical quality factor(Qm). Kp and Qm affected combinationally on filter characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.344-347
• /
• 2007

In this paper, the stability of a cracked cantilever beam subjected to follower force is presented. In addition, an analysis of the flutter instability(flutter critical follower force) of a cracked cantilever beam subjected to a follower compressive load is presented. Based on the Timoshenko beam theory. The vibration analysis on such cracked beam is conducted to identify the critical follower force for flutter instability based on the variation of the first two resonant frequencies of the beam. Besides, the effect of the crack's intensity and location on the flutter follower force is studied. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. Generally, the critical follower force for flutter is proportional to the crack depth.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.123-127
• /
• 2001

In this paper, prototype high-power-factor single-stage electronic ballast for fluorescent lamps is designed and implemented. A new low cost single stage high power factor electronic ballast for fluorescent lamps is based on integration of two-boost converter and LC type high frequency resonant converter. A ballast is obtained by simple construction, because full bridge rectifier diode is eliminated and simple control circuit is applied. Using two boost converter operating positive and negative half cycle respectively at line frequency (60Hz), operation in discontinuous conduction mode performs high power factor. The experimental results Show the good performance as PF 0.99, $A_{THD}$ 15.4%, and CF 1.65 at Output 63.5W.W.