• Structural Engineering and Mechanics
• /
• 제44권5호
• /
• pp.681-704
• /
• 2012

The dynamic response of Euler-Bernoulli beams to resonant harmonic moving loads is analysed. The non-dimensional form of the motion equation of a beam crossed by a moving harmonic load is solved through a perturbation technique based on a two-scale temporal expansion, which permits a straightforward interpretation of the analytical solution. The dynamic response is expressed through a harmonic function slowly modulated in time, and the maximum dynamic response is identified with the maximum of the slow-varying amplitude. In case of ideal Euler-Bernoulli beams with elastic rotational springs at the support points, starting from analytical expressions for eigenfunctions, closed form solutions for the time-history of the dynamic response and for its maximum value are provided. Two dynamic factors are discussed: the Dynamic Amplification Factor, function of the non-dimensional speed parameter and of the structural damping ratio, and the Transition Deamplification Factor, function of the sole ratio between the two non-dimensional parameters. The influence of the involved parameters on the dynamic amplification is discussed within a general framework. The proposed procedure appears effective also in assessing the maximum response of real bridges characterized by numerically-estimated mode shapes, without requiring burdensome step-by-step dynamic analyses.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권10호
• /
• pp.610-617
• /
• 2004

This paper presents a novel high frequency generating circuit integrated chopper-inverter using ZVS with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant inverter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant inverter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications. fluorescent lamp and DC-DC converter etc.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.15-16
• /
• 2010

This paper is study on a high efficiency DC-DC converter of discontinuous conduction mode (DCM) added electric isolation. The converters of high efficiency are generally made that the power losses of the used semiconductor switching devices is minimized. To achieve high efficiency system, the proposed converter is constructed by using a quasi resonant circuit. The control switches using in the converter are operated with soft switching by quasi resonant method. The control switches are operated without increasing their voltage and current stresses by the soft switching technology. The result is that the switching loss is very low and the efficiency of the system is high. The proposed converter is also added electric isolation which is used a pulse transformer. When the power conversion system is required electric isolation, the proposed converter is adopted with the converter system development of high efficiency. The soft switching operation and the system efficiency of the proposed converter are verified by digital simulation and experimental results.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.161-168
• /
• 2005

This paper optimizes the optical flying head(OFH) suspension using the integrated optimization frame, which automatically integrates the analysis with the optimization and effectively implements the repetitive works between them. The problem formulation for the optimization is suggested to improve the dynamic compliance of OFH and to shift the resonant frequencies caused tracking errors to high frequency domain. Furthermore, the minimization of the effective suspension mass that leads to decrease the so-called 'lift-off' as the disk-head separation acceleration divided by the suspension load is taken into consideration. In particular, this study is carried out the optimal design considering the process of modes tracking through the entire optimization processes. The advanced suspension that reduces the effective mass of the suspension and increases the resonant frequencies of sway and $2^{nd}$ torsion over 10kHz is achieved by using the integrated optimization frame.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.132-139
• /
• 2000

This paper reports a novel micromachining process based on UV-LIGA process and (110) silicon anisotropic etching for fabrication of a high-aspect-ratio comb actuator. The comb electrodes are fabricated by (110) SILICON comb structure considering the etch-rate-ratio between (110) and (111) planes and lateral etch rate of a beam-type structure. The fabricated structure was$ 400\mum \; thick\; and\; 18\mum$ wide comb electrodes separated by $7\mim$ so that the height-gap ratio was about 57. Also considering resonant frequency of the comb actuator and the frequency-matching between sensing and driving mode for gyroscope application, we designed the number, width, height and length of the spring structures. Electroplated gold springs on both sides of the seismic mass were $15\mum\; wide,\; 14\mum\; thick\; and \; 500\mum$ long. The fabricated comb actuator had resonant frequency ay 1430Hz, which was calculated to be 1441Hz. The proposed fabrication process can be applicable to the fabrication of a high-aspect-ratio comb actuator for a large displacement actuator and precision sensors. Moreover, this combined process enables to fabricate a more complex structure which cannot be fabricate only by surface or bulk micromachining.

• 대한전자공학회논문지
• /
• 제27권2호
• /
• pp.39-46
• /
• 1990

본 논문에서는 Tschebyscheff 다항식 이론을 이용하여 상대적 전류 분포비가 1:2:2:1이 되도록 구형마이크로스트립패치 어레이 안테나를 설계 제작 하였으며, 이에 대하여 이론적 해석과 실험을 통하여 검증하였다. 보다 정확한 공진주파수를 구하기 위하여 급전선로와 전력 분배 선로를 포함한 등가회로망을 구성하여 전송선로 모델법으로 해석하였다. 프린징효과에 의한 공진주파수, 반사손실에 따른 공진주파수와 실험에 의한 공진주파수를 각각 비교 검토한 결과 오차가 거의 없이 일치됨이 확인되었다. 또한 Tschebuscheff 배열에 의한 어레이 안테나의 첨예한 합성복사 전력패턴이 측정치와 잘 일치하였다.

• 한국광학회지
• /
• 제29권3호
• /
• pp.104-109
• /
• 2018

이 논문에서는 변환 광학의 기본 원리를 설명하고 이를 적용하여 공진기 모양이 원형으로부터 크게 변형되어도 속삭임의 회랑 모드(WGM)의 특성을 유지할 수 있는 다양한 변환 공진기 설계 기법을 소개한다. 특정 등각 변환 하에서 다양한 변환 공진기를 얻는 방법으로서 초기 정의역을 평행 이동시키는 방법과, 타원을 정의역으로 잡고 회전시키는 방법을 제시하였고, 이를 통해 설계된 몇 가지의 공진기 모드에 대한 내부 파형 및 원거리장 출력 특성을 수치해석적으로 계산하였다. 이러한 결과로부터, 하나의 주어진 등각 좌표변환과 관련된 다양한 GRIN 공진기가 가능하다는 것을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.151-160
• /
• 2007

We report the label-free biomolecules detection based on nanomechanical micro cantilevers operated in dynamic mode for detection of two marker proteins (myoglobin and creatin kinase-MB (CK-MB)) of acute myocardical infarctions. When the specific binding between the antigen and its antibody occurred on the fuctionalized microcantilever surface, mechanical response (i.e. resonant frequency) of microcantilevers was changed in lower frequency range. We performed the label-free biomolecules detection of myoglobin and CK-MB antigen in the low concentration (clinical threshold concentration range) as much as 1 ng/ml from measuring the dynamic response change of micro cantilevers caused by the intermolecular force. Moreover, we estimate the surface stress on the dynamic microcantilevers generated by specific antibody-antigen binding. It is suggested that our dynamic microcantilevers may enable one to use the sensitive label-free biomolecules detection for application to the disease diagnosis system based on mechanical immuno-sensor.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.1-9
• /
• 2005

고성능 로켓엔진의 터보펌프를 구동하기 위한 연료 과농 가스발생기에서 연소 불안정 발생시, 음향 모드 공진주파수를 모사하는 방법을 통하여 모사배관을 결정하였다. 관심 음향모드의 몇 파장만을 모사하여 실제 연소시험에 바로 적용할 수 있는 팎은 길이의 배관도 제시하였다. 가스발생기에서의 연소 불안정을 제어하기 위한 하나의 방안으로, 모사배관의 길이를 변경하여 분사기의 동특성과 연소실의 공진 음향 모드를 서로 분리시킴으로써 상호작용이 일어나지 않게 할 수 있다. 이러한 특성은 연소시 험을 통해 확인되었고, 이를 통하여 비행용 가스발생기의 연소시험과 연소불안정 제어를 위한 한 가지 방안으로서 모사배관을 결정하는 방법을 확립하였다.

• 전기화학회지
• /
• 제5권4호
• /
• pp.202-208
• /
• 2002

We have been investigating electropolymerization of pyrrole in aqueous electrolyte solutions in acidic as well as in neutral conditions by in situ electrochemical quartz crystal oscillator method, where resonant frequency and resonant resistance can be monitored simultaneously with current-voltage measurements during electropolymerization of pyrrole. The properties of thin PPy films prepared on electrode surfaces depended strongly on the experimental variables of electrode potentials applied, solution pH, kinds and quantity of supporting electrolytes, added chemicals, and the mode of electrochemical method employed. We are applying our experience gained on electropolymerization of pyrrole to immobilizing biomolecules onto electrode surfaces to develop a biosensor system. In this work, we wish to present the results on electrochemical monitoring on electropolymerization of pyrrole in the presence of DNA and albumin in different electrochemical conditions. Additionally we will summarize our investigations on the miniaturization of biomolecules/PPy composites by means of scanning tunneling microscopy.