• 한국자기공명학회논문지
• /
• 제1권2호
• /
• pp.95-102
• /
• 1997

Deuterium quadrupole coupling constant (e2qzzQ/h) of ($\mu$3-C2H)[Co(CO)3]3 was determined by using solid-state deuterium MAS NMR spectroscopy. The small quadrupole coupling constant of bridging methyne unit relative to sp-acethylene in propyne is discussed in terms of the C-H bond length and the negative charge on the carbon.

• 한국자기공명학회논문지
• /
• 제8권2호
• /
• pp.70-76
• /
• 2004

ZORA-DFT calculations of $^{11}$B EFG (electric field gradient) tensors for lithium borates, LiB$_3O_5$ (LBO) and Li$_2B_4O_7$ (LTB), were performed. The calculated values of 11B quadrupole coupling constant and asymmetry parameter are in good agreement with the experimental values. The sign of the quadrupole coupling constant for the tetrahedral boron site was deduced from the distortion from the ideal tetrahedral symmetry.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.17-24
• /
• 2014

본 논문에서는 직접결합에 의한 저 위상잡음 유전체 공진기 설계를 위하여, 고유전율의 유전체 공진기와 마이크로스트립선로 사이의 결합계수에 대해 분석하였으며, 고유전율로 인한 Q값의 보완을 위한 병렬궤환 회로 적용한 유전체 공진 발진기의 위상잡음을 분석하였다. 유전체 공진기의 위상잡음 분석과 결합계수의 분석을 통하여 고안정 유전체 공진 발진기를 최적화 설계한 결과 20.25GHz 유전체 공진 발진기의 ${\epsilon}_r$=30인 유전체 공진기를 사용한 경우 결합계수가 약 3.6의 값을 나타낼 때 20.25GHz에서 위상잡음은 -84.3dBc/Hz@1KHz를 나타냄을 확인하였다. 본 연구의 결과로 K-Band 에서도 주파수 체배 방식에 의한 위상잡음 손실을 방지하는 직접결합 설계 방안을 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.429-430
• /
• 2011

• 한국소음진동공학회논문집
• /
• 제22권4호
• /
• pp.352-357
• /
• 2012

The ground resonance instability of a helicopter with bearingless main rotor hub were investigated. The ground resonance instability is caused by an interaction between the blade lag motion and hub inplane motion. This instability occurs when the helicopter is on the ground and is important for soft-inplane rotors where the rotating lag mode frequency is less than the rotor rotational speed. For the analysis, the bearingless rotor was composed of blades, flexbeam, torque tube, damper, shear restrainer, and pitch links. The fuselage was modeled as a mass-damper-spring system having natural frequencies in roll and pitch motions. The rotor-fuselage coupling equations are derived in non-rotating frame to consider the rotor and fuselage equations in the same frame. The ground resonance instabilities for three cases where are without lead-lag damper and fuselage damping, with lead-lag damper and without fuselage damping, and finally with lead-lag damper and fuselage damping. There is no ground resonance instability in the only rotor-fuselage configuration with lead-lag damper and fuselage damping.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.37-46
• /
• 2017

This paper is concerned with the numerical study on the resonance response of a rigid spar-type floating platform in coupled heave and pitch motion. Spar-type floating platforms, widely used for supporting the offshore structures, offer an economic advantage but those exhibit the dynamically high sensitivity to external excitations due to their shape at the same time. Hence, the investigation of their dynamic responses, particularly at resonance, is prerequisite for the design of spar-type floating platforms which secure the dynamic stability. Spar-type floating platform in 2-D surface wave is assumed to be a rigid body having 2-DOFs, and its coupled dynamic equations are analytically derived using the geometric and kinematic relations. The motion-variance of the metacentric height and the moment of inertia of floating platform are taken into consideration, and the hydrodynamic interaction between the wave and platform motions is reflected into the hydrodynamic force and moment and the frequency-dependent added masses. The coupled nonlinear equations governing the heave and pitch motions are solved by the RK4 method, and the frequency responses are obtained by the digital Fourier transform. Through the numerical experiments to the wave frequency, the resonance responses and the coupling in resonance between heave and pitch motions are investigated in time and frequency domains.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.333-341
• /
• 2022

자기전기복합체(magnetoelectric, ME compositie)는 자왜재료와 압전재료의 결합현상을 이용하는 재료로서 지난 20여 년간 이론적, 실험적으로 많은 연구가 진행되어 왔다. 자기전기복합체의 출력특성은 구성하는 소재, 계면층, 복합체의 형상, 자기장하 진동모드 등의 많은 구성요소의 최적화를 통하여 급속히 향상되고 있다. 하지만 자기전기복합체의 자기전기 결합 특성 평가는 대부분의 연구들에서 구체적인 방법을 제시하지 않아 어떻게 측정한 것인지가 불명확한 경우가 많다. 본 논문에서는 자기전기복합체의 비공진, 공진상황에서 자기전기 전압계수를 어떻게 측정할 수 있는지에 대한 자세한 방법을 소개한다. 평가를 위한 샘플로서 대칭적인 구조를 가지는 Gelfenol/PMN-PZT/Gelfenol 자기전기복합체를 제조하였다. 압전 재료로는 이방성의 (011) 32 모드의 PMN-PZT 압전 단결정과 자왜재료로는 Galfenol 합금을 사용하여 에폭시로 접착하였다. 컴퓨터 인터페이스로 자동화된 자기전기 전압특성 측정 시스템의 구성을 우선 설명하고, 자기전기 결합특성의 측정 방법을 단계별로 설명한다. 본 튜토리얼 논문에서는 자기전기결합 특성과 특성평가방법을 이해하고자 하는 연구자들에게 도움이 될 수 있는 평가방법의 원리와 절차를 제공하고자 하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.40-44
• /
• 2013

The contactless power transfer (CPT) systems have been recently gaining popularity widely since it is an available option to realize the power delivery and storage with connector-free devices across a large air gap. Especially, the CPT with electromagnetic resonance coupling method is possible to exchange energy within 2 m efficiently. However, the power transfer efficiency of CPT in commercialized products has been limited because the impedance matching of coupled coils is sensitive. As a reasonable approach, we combined the CPT system with HTS wire technology and called as, superconducting contactless power transfer (SUCPT) system. Since the superconducting coils have an enough current density, the superconducting antenna and receiver coils at CPT system have a merit to deliver and receive a mass amount of electric energy. In this paper, we present the feasibility of the SUCPT system and examine the transmission properties of SUCPT phenomenon between room temperature and very low temperature at 77 K as long as the receiver is within 1.0 m distance.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.46-51
• /
• 2018

In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of $15mm{\times}50mm{\times}1mm$. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.846-849
• /
• 2018

Wireless power transfer (WPT) is the technology that enables the power to transmit electromagnetic field to an electrical load without the use of wires. There are two kinds of magnetic resonant coupling and inductive coupling ways transmitting from the source to the output load. Compared with microwave method for energy transfer over a long distance, the magnetic resonance method has the advantages of reducing the barrier of electromagnetic wave and enhancing the efficiency of power transmission. In this paper, the wireless power transfer circuit having a resonant frequency of 13.45 MHz for the low power system is studied, and the hardware implementation is accomplished to measure the power transmission efficiency for the distance between the transmitter and the receiver.