• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.652-659
• /
• 2012

직사각형 슬릿 개구를 갖는 금속 함체에 수직, 수평 편파를 입사하여 차폐 효과를 연구하였다. 직사각형 슬릿개구의 magnetic polarizability와 금속 함체의 공진 모드를 이론적으로 분석하였고, 이를 바탕으로 시뮬레이션 결과와 측정 결과를 비교 분석하였다. 또한, 함체 내부 프로브의 위치에 따른 차폐 효과 의존성도 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.274-275
• /
• 2006

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. Linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 17 [%] under the speed 0.14 [m/s], thrust 345 [gf] and preload 280 [gf], operating frequency is 57.6 [kHz].

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.56-62
• /
• 2015

In ship structure, many parts are in contact with inner or outer fluid as stern, ballast and oil tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these tanks in contact with fluid are significantly affected by fluid coupling effect. Therefore it is important to exactly predict vibration characteristics of tank structure. In order to estimate the vibration characteristics, the fluid-structure interaction(FSI) problem should be solved precisely. But it is difficult to estimate exactly the magnitude of the fluid coupling effect because it has some problems such as a fluid-structure interaction, influence by the free surface, vibration modes of structural panels and depth of water. In this paper, with fluid coupling effect, the effect of structural constraint between panels on the vibration characteristics are investigated numerically and discussed.

• Smart Structures and Systems
• /
• 제24권2호
• /
• pp.257-266
• /
• 2019

The benefit of data fusion in improving the performance of Higher Order Sliding Mode (HOSM) observer is brought out in this paper. This improvement in the performance of HOSM observer, resulted in the improvement of active vibration control of a piezo actuated structure, when controlled by a Discrete Sliding Mode Controller (DSMC). The structure is embedded with two piezo sensors for measuring the first two vibrating modes. The fused output of sensors is applied to the HOSM observer for generating state estimates, these states generated are applied to the DSMC, designed for the fourth order linear time invariant model of the structure. In the simulation study, the structure is excited at the first and second mode resonance. It is found that better vibration suppression is obtained, when the states generated by the fused output of sensors is applied as controller input, than the vibration suppression obtained by applying the states generated by using individual sensor output. The closed loop performance of DSMC obtained with HOSM observer is compared with the closed loop performance obtained with the conventional observer. Results obtained shows that better vibration suppression is obtained when the states generated by HOSM observer is applied as controller input.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.444-449
• /
• 2021

A photonic crystal coupled-cavity waveguide created on silicon-on-insulator is designed to act as a refractive-index-sensing device at midinfrared wavelengths around 4 ㎛. To realize high sensitivity, effort is made to engineer the structural parameters to obtain strong modal confinement, which can enhance the interaction between the resonance modes and the analyzed sample. By adjusting some parameters, including the shape of the cavity, the width of the coupling cavity, and the size of the surrounding dielectric columns, a high-sensitivity refractive-index sensor based on the optimized photonic crystal coupled-cavity waveguide is proposed, and a sensitivity of approximately 2620 nm/RIU obtained. When an analyte is measured in the range of 1.0-1.4, the sensor can always maintain a high sensitivity of greater than 2400 nm/RIU. This work demonstrates the viability of high-sensitivity photonic crystal waveguide devices in the midinfrared band.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.657-668
• /
• 2021

In this study, a relationship between the resonance frequency ratio and Poisson's ratio was proposed that can be used to directly determine the elastic constants. Using this relationship, the frequency ratio between the 1st bending mode and 2nd bending mode for any rectangular Timoshenko beam can be directly estimated and used to determine the elastic constants efficiently. The exact solution of the Timoshenko beam vibration frequency equation under free-free boundary conditions was determined with an accurate shear shape factor. The highest percent difference for the frequency ratio between the theoretical values and the estimated values for all the beam dimensions studied was less than 0.02%. The proposed equations were used to obtain the elastic constants of beams with different material properties and dimensions using the first two measured transverse bending frequencies. Results show that using the equations proposed in this study, the Young's modulus and Poisson's ratio of rectangular Timoshenko beams can be determined more efficiently and accurately than those obtained from industry standards such as ASTM E1876-15 without the need to test the torsional vibration.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.833-847
• /
• 2021

The horizontal porous baffle and its effect as an anti-slosh device have been investigated intensively in a swaying and rolling rectangular tank. To accurately assess the level at which porous baffles reduce liquid sloshing, the Matched Eigenfunction Expansion Method (MEEM) has been utilized as an analytical tool. The velocity potentials in the horizontal baffle-covered fluid region are expressed by the sum of the homogeneous and particular solutions to avoid solving the complex dispersion equation. By applying an equivalent linearized quadratic loss model, the nonlinear algebraic equation is derived and solved by implementing the Newton-Raphson iterative scheme. To prove the validity of the present theoretical model, a series of experiments have been conducted with different centered horizontal porous baffles with varying porosities and submerged depths in a swaying and rolling rectangular tank. Reasonably good agreements are obtained regarding the analytical solutions and the experiment's findings. The influence of porosity, submerged depth, and length of a centered horizontal porous baffle on anti-slosh performance have been analyzed, especially at resonance modes. The developed predictive tool can potentially provide guidelines for optimal design of the horizontal porous baffle.

• 한국음향학회지
• /
• 제25권5호
• /
• pp.197-206
• /
• 2006

비올족 현악기에서 현의 진동은 브릿지에 의해 전판에 전달되어서 악기 몸통을 공명시킨다. 따라서 브릿지의 재질, 기하학적 형상, 설치 위치 등이 음색에 영향을 미치게 된다. 본 연구에서는 첼로에서 현에 의해 변위가 가해질 때 브릿지 내부의 변형, 응력, 그리고 브릿지 다리에 의해 전판에 미치는 힘을 탄성학적으로 해석하고, 브릿지의 고유진동모드와 고유진동주파수 등을 구하였다. 또, 브릿지의 형상이 음색에 미치는 영향을 주파수 응답의 관점에서 측정하였다. 본 연구의 결과는 첼로에서 브릿지의 진동특성은 대단히 복잡하고, 그 재질, 형상 등이 음색에 큰 영향을 미치며, 따라서 브릿지의 형상을 변화시킴으로써 첼로의 음색을 조정하는 것이 가능함을 실험적으로 보였다.

• Applied Microscopy
• /
• 제50권
• /
• pp.25.1-25.11
• /
• 2020

Scanning acoustic microscopy (SAM) or Acoustic Micro Imaging (AMI) is a powerful, non-destructive technique that can detect hidden defects in elastic and biological samples as well as non-transparent hard materials. By monitoring the internal features of a sample in three-dimensional integration, this technique can efficiently find physical defects such as cracks, voids, and delamination with high sensitivity. In recent years, advanced techniques such as ultrasound impedance microscopy, ultrasound speed microscopy, and scanning acoustic gigahertz microscopy have been developed for applications in industries and in the medical field to provide additional information on the internal stress, viscoelastic, and anisotropic, or nonlinear properties. X-ray, magnetic resonance, and infrared techniques are the other competitive and widely used methods. However, they have their own advantages and limitations owing to their inherent properties such as different light sources and sensors. This paper provides an overview of the principle of SAM and presents a few results to demonstrate the applications of modern acoustic imaging technology. A variety of inspection modes, such as vertical, horizontal, and diagonal cross-sections have been presented by employing the focus pathway and image reconstruction algorithm. Images have been reconstructed from the reflected echoes resulting from the change in the acoustic impedance at the interface of the material layers or defects. The results described in this paper indicate that the novel acoustic technology can expand the scope of SAM as a versatile diagnostic tool requiring less time and having a high efficiency.

• 비파괴검사학회지
• /
• 제25권5호
• /
• pp.339-342
• /
• 2005

광섬유 센서 구성을 위한 장주기 광섬유 격자(Long-Period Fiber Grating, LPFG)는 코어 모드로 진행하는 빔이 위상 정합 조건(Phase Matching Condition)에 의해 특정 파장에서 클래딩 모드와 커플링이 일어나는 광소자이다. 공진 파장과 커플링의 세기는 온도, 스트레인, 주변 굴절 지수 등에 의해 민감하게 변화하는 특성을 이용하여 광섬유 센서에 넓게 응응될 수 있다 일반적으로 광섬유 격자는 광섬유 코어를 자외선에 노출시킴으로서 굴절률의 주기적인 변화가 유도되는 원리, 즉 광민감성 (Photosensitivity)에 기초를 두고 있으며 광민감성을 가진 격자제조용 광섬유 제작은 광섬유 격자 연구에 대단히 중요한 부분이다. 이 논문에서는 보론 첨가의 양에 의한 코어와 클래딩의 굴절률 차 변화와 그것에 따른 장주기 광섬유 격자의 온도 및 구부림 특성 변화를 분석하였다. 보론의 양이 증가할수록 코어와 클래딩의 굴절률 차가 줄어드는 것$(1.69{\times}10^{-4}/SCCM)$을 실험을 통해 알 수 있었고, 그로 인해 보론의 음의 온도 의존성으로 인해 장주기 광섬유 격자의 온도 의존성이 억제됨$(0.01145nm/^{\circ}C/SCCM)$을 확인할 수 있었다. 또한, 보론의 증가로 인해 코어와 클래딩의 굴절률차가 줄어들수록 장주기 광섬유 격자는 구부림에 더 민감함을 알 수 있었다.