• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 추계학술대회 논문집
• /
• pp.181-184
• /
• 2000

가상현실 시스템은 대부분 가상세계에 대해 사용자의 3차원 제어작업을 요구하게 된다. 이때 3차원 제어작업을 효과적으로 하기 위한 입출력장치의 최적 설계는 매우 중요하다. 본 연구에서는 3차원 표시장치의 주요 설계요소인 공간적 해상도(spatial resolution), 시간적 해상도(temporal resolution or frame rate), 가상세계의 복잡도가 3차원 제어작업의 인간성능에 미치는 영향을 알아보았다. 이를 위해 3 조건의 화면 해상도, 2 조건의 프레임 레이트(18 Hz고정과 18Hz 이상 변동 최대화 조건), 3 조건의 가상세계 복잡도에 대한 18 조합에 대한 실험을 실시하였다. 실험결과 18Hz 로 고정된 프레임 레이트 조건이 프레임 레이트를 그 이상 최대로 하는 것보다 더 좋은 제어성능을 보였다. 화면 해상도는 높을수록 제어성능이 향상되었다. 가상세계의 복잡도에서는 방향정보만 주는 경우가 방향 정보가 없는 경우나 너무 많은 정보가 있는 경우보다 나은 성능을 보였다. 이러한 실험결과는 가상환경 시스템의 표시장치나 가상세계 설계에 참조될 수 있을 것이다.

• 정보학연구
• /
• 제5권2호
• /
• pp.69-80
• /
• 2002

일반적으로 초음파현미경시스템은 동작주파수로 단일 주파수를 사용해 왔다. 측정된 영상의 분해능과 질은 초음파현미경에서 사용된 초음파변환기에 의하여 결정된다. 본 논문에서는 SFR(Spatial Frequency Response)의 기저대역 조합을 통하여 반사형 초음파현미경의 수직분해능 개선에 대하여 연구하였다. 수직 분해능을 증가시키기 위해서는 하나 이상의 동작 주파수에서 얻어진 영상을 획득하고 이를 대수적으로 합성시켜 얻어진다. 실험결과 깊이 변화율이 개선된 영상들을 얻을 수 있었다.

• KSBB Journal
• /
• 제9권3호
• /
• pp.306-311
• /
• 1994

유기용매상에서 Bacillus licheniformis에서 생산되는 protease를 이용하여 라세믹 ${\alpha}$-methylbenzy lamine의 광학분함을 행하였다. 이 반응은 아설 제 공자로 활성 에스대르를 샤용하여 라서l믹 아민을 광 학선택적으로 아마드로 변환시킨다. 이 반응의 반응 속도와 광학선택성을 증가시켜주기 위해 효소를 완 충액에 녹여 pH를 맞춘 후에 동결건조시키거나, 동결건조시 염이나 lyoprotectants를 첨가시키는 방 법, 적당한 유기용매의 선정, 에스테르 구조의 디자 인 등의 방법을 사용하였다. 그 결과. 30배의 초기 반응속도의 증가 및 12배의 광학선택성이 증가하는 결과를 보였다.

• KSBB Journal
• /
• 제10권5호
• /
• pp.482-490
• /
• 1995

The relationship between pressure drop and liquid flow rate, for an axial and a radial flow chromatographic column packed with compressible porous media was theoretically analyzed using modified Kozeny-Carman equation. The results were compared with experimental observations obtained using compressible DEAE-agarose as a model medium. At 2-9 psi range studied, the theoretical derivation accounting for 'gel compression' effect predicted simple Langmuirian type response of volumetric flow rate to changes in pressure drop. On the other hand, the experimental response was more or less sigmoidal. At the same pressure drop, radial column showed 2-3 times higher flow rates than those of axial column both theoretically and experimentally. Using r-HBsAg crude extract, protein resolution effects between the two types of columns at different flow rates were compared side-by-side. It turned out that, though general chromatographic behavior was very similar, axial column was somewhat superior in terms of r-HBsAg recovery yield and specificity. However, the number of theoretical plates analysis indicated the protein resolution effects were comparable.

• Asian Journal of Atmospheric Environment
• /
• 제11권4호
• /
• pp.270-282
• /
• 2017

To evaluate the deposition amount on a ground surface, mesoscale numerical models coupled with atmospheric chemistry are widely used for larger horizontal domains ranging from a few to several hundreds of kilometers; however, these models are rarely applied to high-resolution simulations. In this study, the performance of a dry and wet deposition model is investigated to estimate the amount of deposition via computational fluid dynamics (CFD) models with high grid resolution. Reynolds-averaged Navier-Stokes (RANS) simulations are implemented for a cone and a two-dimensional ridge to estimate the dry deposition rate, and a constant deposition velocity is used to obtain the dry deposition flux. The results show that the dry deposition rate of RANS generally corresponds to that observed in wind-tunnel experiments. For the wet deposition model, the transport equation of a new scalar concentration scavenged by rain droplets is developed and used instead of the scalar concentration scavenged by raindrops falling to the ground surface just below the scavenging point, which is normally used in mesoscale numerical models. A sensitivity analysis of the proposed wet deposition procedure is implemented. The result indicates the applicability of RANS for high-resolution grids considering the effect of terrains on the wet deposition.

• 한국통신학회논문지
• /
• 제24권8B호
• /
• pp.1540-1548
• /
• 1999

본 논문에서는 적응적 탐색영역을 이용한 다중해상도 움직임 추정 방법을 제안하였다. 연속 프레임간의 시간적 중복성을 이용하여 잠재적 움직임 영역을 나타내는 이진 평균을 구성하고, 이를 기반으로 움직임을 추정하였다. 대역들간의 에너지 분포와 계산량을 고려하여, 계층이 높아질수록 잠재적 움직임 영역을 작게 하였다. 모의 실험 결과 EMRME 방법[7]과 비교했을 때, 움직임이 큰 영상에 대해서는 비슷한 화질에서 계산량이 약 33∼46%, 비트수는 약 10∼18% 감소하였으며, 움직임이 작은 영상에 대해서도 비슷한 화질과 비트수에서 계산량이 약 37∼65% 감소하였다.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.651-657
• /
• 2003

Ultrasonic microscope has been used to detect the defects on surface or inner solid. Conventionally, it has used at a single operating frequency. The resolution and quality of the measured images are determined by a characteristic of the transducer of the ultrasonic microscope. The conventional ultrasonic microscope has been used envelope detector to detect the amplitude of reflected signal, but the changes in amplitude is not sensitive enough for specimen with microstructure that in phase. In this paper, we have studied multi-frequency depth resolution enhancement with ultrasonic reflection microscope for the reflectors of a stainless steel reference specimen and a reference calibration block to be used as the material in nuclear power plants for ISI, PSI. Increased depth resolution can be obtained by taking two, three-dimensional images at more that one frequency and numerically combining the results. As results of the experiment, we could get enhanced images with the rate of contrast in proportion and high quality signal distribution for the image to the changing rate of depth for the reflectors of the two kinds of specimens.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.31-39
• /
• 2014

Recently, as Intelligent Transportation System (ITS) and self-driving system become influential in the ground transportation system, automotive radar systems have been actively studied among the various radar systems to implement the vehicle collision detection system and distance measurement system between vehicles. Most of the automotive radars are Frequency Modulated Continuous Wave (FMCW) radar type which can calculate distance and velocity of target by estimating the frequency difference between the transmitted signal and received signal. Therefore, accurate frequency estimation is very important in the FMCW radar system. For this reason, to improve the measurement accuracy of the FMCW radar, Reverse Directional FRI (RD-FRI) Super-Resolution technique which has high frequency estimation accuracy is applied to the FMCW radar system. The feasibility of the proposed technique is evaluated with simulation results and compared with FFT and conventional Super-Resolution techniques. The simulation results show that the proposed technique estimates the frequency with high accuracy and the distance with centimeter accuracy.

• Childhood Kidney Diseases
• /
• 제20권1호
• /
• pp.18-22
• /
• 2016

Purpose: The previous reports regarding VUR resolution were not precise due to early frequent surgical intervention. We evaluated the spontaneous resolution (SR) rate and the incidence of new renal scars in primary VUR, focusing on severe reflux. Methods: Medical records of 334 patients with primary VUR who were on medical prophylaxis without surgery for 1 to 9 years, were retrospectively reviewed. Medical prophylaxis was initiated with low-dose antibiotic prophylaxis or probiotics. Radioisotope cystourethrography was performed every 1 to 3 years until SR of reflux. New renal scar was evaluated with follow-up $^{99m}Tc$ DMSA renal scan. Results: The SR rates decreased as VUR grades were getting higher (P=0.00). The overall and annual SR were 58.4% and 14.9%/yr in grade IV reflux and 37.5% and 9.3%/yr in grade V reflux. The median times of SR were 38 months in grade IV reflux and 66 months in grade V reflux. The probable SR rates in grade IV and V reflux were 7.8% and 8.9% in the 1st year, 46.0% and 30.8% in the 3rd year and 74.4% and 64.4% in the 5th year. The incidences of new renal scars between low to moderate reflux and severe reflux showed no significant difference (P=0.32). Conclusion: The SR rates of severe primary VUR were higher than previously reported and most new renal scars were focal and mild.

• 간호행정학회지
• /
• 제20권5호
• /
• pp.535-544
• /
• 2014

Purpose: This study was done to develop a schematized alarm-managing manual for continuous renal replacement therapy (CRRT) and to investigate its effects in maintaining continuity in the patients' treatment and promptly resolving alarms when CRRT is being carried out. Methods: Sixtynurses from two medical intensive care units (ICUs) (one experimental and one control) at one hospital were asked to answer a questionnaire including their CRRT nursing competency and satisfaction with the manual. Data on alarm resolution rate were collected by analyzing existing data, such as the details of each alarm and the number of resolutions around the clock in the CRRT device. Results: The alarm resolution rate and some of CRRT nursing competency scores in the experimental group were higher than those in the control group. The experimental group was also satisfied with the manual. Conclusion: The study confirmed that the schematized alarm-managing manual can be useful for ICU nurses to resolve alarms and can be used as a guideline. Application of this manual to clinical practices and its use can therefore, be encouraged through continuous education and promotion.