• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.29-32
• /
• 2017

The use of electronic devices such as mobile phones and tablet PCs has increased of late. However, the power which is supplied through wires has a limitation of the free use of devices and portability. Magnetic-resonance wireless power transfer (WPT) can achieve increased transfer distance and efficiency compared to the existing electromagnetic inductive coupling. A superconducting coil can be applied to increase the efficiency and distance of magnetic-resonance WPT. As superconducting coils have lower resistance than copper coils, they can increase the quality factor (Q-factor) and can overcome the limitations of magnetic-resonance WPT. In this study, copper coils were made from ordinary copper under the same condition as the superconducting coils for a comparison experiment. Superconducting coils use liquid nitrogen to keep the critical temperature. As there is a difference of medium between liquid nitrogen and air, liquid nitrogen was also used in the normal conductor coil to compare the experiment with under the same condition. It was confirmed that superconducting coils have a lower reflection-coefficient($S_{11}$) than the normal conductor coils.

• 마이크로전자및패키징학회지
• /
• 제16권4호
• /
• pp.5-8
• /
• 2009

In this paper, a high-quality low-temperature co-fired ceramic (LTCC) solenoid inductor using a solder ball and an air cavity on a silicon wafer for three-dimensional (3-D) system-in-package (SiP) is proposed. The LTCC multi-layer solenoid inductor is attached using Ag paste and solder ball on a silicon wafer with the air cavity structure. The air cavity is formed on a silicon wafer through an anisotropic wet-etching technology and is able to isolate the LTCC dielectric loss which is equivalent to a low k material effect. The electrical coupling between the metal layer and the LTCC dielectric layer is decreased by adopting the air cavity. The LTCC solenoid inductor using the solder ball and the air cavity on silicon wafer has an improved Q factor and self-resonant frequency (SRF) by reducing the LTCC dielectric resistance and parasitic capacitance. Also, 3-D device stacking technologies provide an effective path to the miniaturization of electronic systems.

• 한국세라믹학회지
• /
• 제27권2호
• /
• pp.187-194
• /
• 1990

Effects of MnO2 addition ranged from 0.0wt% to 5.0wt% on the microstructure and dielectric and piezoelectric properties of the Pb(Zr0.52 Ti0.48)O3 Ceramics have been investigated. The solubility limit of MnO2 in Pb(Zr0.52 Ti0.48)O3 is about 0.5wt%, and MnO2 as a valence state of Mn3+ is substituted for (Zr, Ti) lattice site in PZT solid-solution. The addition of MnO2 up to 0.5wt% in Pb(Zr0.52 Ti0.48)O3 brings increase of density, but decreased of grain size and tetragonality. Dielectric constant slightly decreases, but both coupling factor(Kp) and mechanical quality factor(Qm) increase with the addition of MnO2. However, excess amount of MnO2 addition more than 0.75wt% results in rapid decrease of resistance. Dielectric constant and tan $\delta$ increase due to the second phase and inhomogeneous Mn distribution.

• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.149-153
• /
• 2003

본 연구에서는 풀력측 전극비를 보다 증가시킬 목적으로 새로운 형상인 육각형 압전변압기를 제작하여 전극 패턴을 설계하고, 전기적 출력 특성을 검토하였다. 이 때 육각형 압전변압기의 한변의 길이가 각각 14[mm]와 17.5[mm]로 하였으며, 압전변압기에 적용된 세라믹의 성분계는 PZT-PMN-PSN이었으며, 기계적 품질계수가 1200, 전기기계결합계수는 55%, 압전정수 $d_{33}$은 320${\times}$$10^{-l2}$C/N, 손실계수는 0.3%이었다. 부하저항의 증가에 따라 승압비는 증가하였으며, 육각형 압전변압기의 한 변의 길이가 증가함에 따라서도 증가하는 경향을 보였다. 최대 효율은 10∼20[M$\Omega$]근처에서 약 93%가 얻어졌다.다.다.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.36-41
• /
• 1999

Methods for mode identification and accurate measurements of the unloaded Q ($Q_0$) of a dielectric-loaded $TE_{01{\delta}}$ mode cavity resonator with HTS endplates are proposed. A resonator with a sapphire rod and $YBa_2Cu_3O_{7-x}$(YBCO) endplates was prepared and its microwave properties were studied at temperatures above 30 K. The $TE_{01{\delta}}$ mode $Q_0$ of the resonator, designed to work as a tunable resonator with variations in the gap distance (s) between the sapphire rod and the top YBCO, was more than 1000000 at s = 0 mm and at 30 K with the resonant frequency of 19.56 GHz. The $TE_{01{\delta}}$ mode $Q_0$ decreases as s increases for s < 2 mm until mode couplings between the $TE_{01{\delta}}$ mode and other modes appeared at s = 2 mm. Significant dependence of the $TE_{01{\delta}}$ mode $Q_0$ on the input and output coupling constants was also observed. Applications of the open-ended $TE_{01{\delta}}$ mode cavity resonator for a tunable resonator with a very high Q as well as a characterization tool for the surface resistance measurements of HTS films are described.

• 한국전자파학회논문지
• /
• 제10권5호
• /
• pp.719-726
• /
• 1999

임의의 방향에서 입사하는 외부 전자파와 다중 전송선로와의 결합 특성을 해석하기 위해 다중 전송선 방 정식을 FDTD 기법으로 전개하고 선로에 유도되는 전압을 시율레이션하였다. 테스트 선로로는 Ethernet 방식 의 고속 LAN 구축시 사용되는 UTP Category 5 케이블과 알루미늄 호일로 차폐된 STP Category 5 케이블 을 사용하였다. TEM 생을 이용하여 유도전압을 측정한 실험결과와 시율레이션 결과를 비교하여 잘 일치함 을 확인하였다. 또한 차폐된 STP Category 5에 대해 차폐 호일의 접지상태 및 접지저항의 변화에 따른 차폐 효과를 비교한 결과, 차폐 호일의 양단을 모두 접지하고 접지저항을 작게 할 때 차폐 효과가 가장 크게 나타 났다

• Journal of electromagnetic engineering and science
• /
• 제4권1호
• /
• pp.30-36
• /
• 2004

We determined equivalent circuit parameters of a 1.5 cell S-band RF gun cavity from the resonant characteristics of its decoupled cavities(half cell and full cell) using the code SUPERFISH. Equivalent circuit parameters of the 1.5 cell RF gun cavity resonated in the 0-mode were obtained easily from the circuit parameters of each decoupled cavities. In order to obtain equivalent circuit parameters for the $\pi$ -mode cavity, we calculated the differences of the resonant frequencies and the equivalent resistances between the 0- and $\pi$ -modes with slight variations of the radius and thickness of the coupling iris. From those differences, we obtained R/Q value and equivalent resistance of the $\pi$ -mode, which are directly related to the equivalent circuit parameters of the coupled cavity. Using calculated R/Q value, we can express equivalent inductance, capacitance and resistances of the RF gun cavity resonated in the $\pi$ -mode, which can be useful for analyzing coupled cavities in a steady state.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.74-81
• /
• 2001

스위치드 릴럭턴스 모터(이하 SRM) 구동을 위한 센서리스 설계는 노이즈에 민감하기 때문에 이에 대한 강인성과 신뢰성이 있어야 한다. SRM 구동시에 이들 성분은 소선호 전자회로와 함께 대전류 전력회로와 근접되어 전기적으로 노이즈 환경을 만든다. 또한, 쇄교 인덕턴스와 유한 커플링 캐패시턴스에 의해 어떤 저전압 전류와 전압 측정회로에 노이즈를 일으킬 수 있다. 노이즈를 포함한 전류와 전압은 센서리스 알고리즘의 입력 값으로 사용되기 때문에 위치추정에 대한 오차를 발생한다. 본 논문에서는 입력 노이즈에 대한 높은 강인성과 저항성을 기술하며 퍼지 논리 기반 회전자 위치 추정 알고리 즘과 관측기 모델이 입력 데이터의 오차를 줄이기 위해 사용하였다.

• 대한전자공학회논문지TC
• /
• 제45권7호
• /
• pp.77-80
• /
• 2008

본 논문에서는 위상잡음 특성을 개선하기 위하여 spiral 공진기를 이용한 전압제어 발진기를 제안하였다. Spiral 공진기는 작은 면적, 저지대역에서 날카로운 스커트 특성과 낮은 삽입손실, 큰 결합 계수 값을 가지고 있고, 이로 인해 높은 Q 값을 가지며 전압 제어 발진기의 위상 잡음을 감소시킨다. 공진기의 Q 값이 높아짐에 따라 좁아지는 주파수 조절 범위를 높이기 위하여 버랙터 다이오드를 조절 가능한 부성저항에 연결하였다. 전압 제어발진기는 $5.686{\sim}5.841GHz$에서 발진이 일어났고, 출력은 11.83 dBm, 하모닉 특성은 -29.83 dBc, 위상 잡음 특성은 100 KHz offset에서 $-115.16{\sim}115.17dBc/Hz$이다.