• Development and Reproduction
• /
• v.18 no.4
• /
• pp.197-212
• /
• 2014

Osteosarcoma (OS) is one of the most common malignant primary bone tumors and NF-${\kappa}B$ appears to play a causative role, but the mechanisms are poorly understood. OS is one of the pleomorphic, highly metastasized and invasive neoplasm which is capable to generate osteoid, osteoclast and osteoblast matrix. Its high incidence has been reported in adolescent and children. Cell signal cascade is the pivotal functional mechanism acquired during the differentiation, proliferation, growth and survival of the cells in neoplasm including OS. The major limitation to the success of chemotherapy in OS is the development of multidrug resistance (MDR). Answers to all such queries might come from the knock-in experiments in which the combined approach of miRNAs with NF-${\kappa}B$ pathway is put into use. Abnormal miRNAs can modulate several epigenetical switching as a hallmark of number of diseases via different cell signaling. Studies on miRNAs have opened up the new avenues for both the diagnosis and treatment of cancers including OS. Collectively, through the present study an attempt has been made to establish a new systematic approach for the investigation of microRNAs, bio-physiological factors and their target pairs with NF-${\kappa}B$ to ameliorate oncogenesis with the "bridge between miRNAs and NF-${\kappa}B$". The application of NF-${\kappa}B$ inhibitors in combination with miRNAs is expected to result in a more efficient killing of the cancer stem cells and a slower or less likely recurrence of cancer.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.115-115
• /
• 2018

철강재는 대량 생산이 가능하며 경제성이 뛰어나고 기계적 성질도 우수하므로 다양한 산업 분야에서 널리 사용되고 있다. 그러나 철강재는 부식 환경에 취약하기 때문에 그 용도에 따라 다양한 내식성을 부여하는 표면처리를 적용하고 있다. 일반적으로 이러한 철강 재료에 대한 내식성 표면처리로는 습식공정을 이용한 아연(Zn)도금 표면처리가 널리 적용되고 있다. 그러나 최근에는 이러한 습식공정으로 인해 발생하는 자원소모 및 환경적인 문제와 더불어 고내식성 표면처리 소재에 대한 수요가 증가함에 따라 이러한 단점을 극복할 수 있는 새로운 소재 및 기술 개발에 대한 관심이 증대되고 있다. 이러한 관점에서 기존의 습식표면처리 공정을 건식으로 대체 또는 병행하고, 현행 아연소재를 대체할 수 있는 코팅소재로써 알루미늄(Al) 이나 마그네슘(Mg)으로 대체하는 방법이 시도되고 있다. 본 연구에서는 강판의 내식성을 향상시키기 위한 방법으로 기존의 습식 표면처리 공정에서 용이하지 않은 마그네슘을 이용하여 건식 PVD 프로세스에 의해 코팅막의 제작을 시도하였다. 그리고 코팅막 제작 조건 중에서 공정압력이 코팅막의 결정배향성에 미치는 영향과 내식성과의 상관관계를 규명하고자 하였다. 즉, 여기서는 강판 및 용융알루미늄 도금강판 상에 스퍼터링법에 의해 Ar 가스에 의한 공정압력을 2, 10 및 50 mTorr로 조절하면서 마그네슘 코팅막을 $2{\mu}m$ 두께로 각각 제작하였다. 이때 제작한 막의 표면 모폴로지 관찰(SEM) 및 결정구조 분석(XRD) 결과에 의하면, 강판 및 용융알루미늄도금강판 상에 제작한 코팅막들은 공통적으로 공정압력이 증가할수록 그모폴로지의 결정립의 크기가 작고 치밀한 구조로 변하였다. 또한 그때 형성된 코팅막의 결정구조는 표면에너지가 상대적으로 높은 Mg(002)면 피크의 점유율이 감소하고 표면에너지가 낮은 Mg(101)면 피크의 점유율이 증가하는 경향을 나타내었다. 그리고 공정압력이 증가할수록 Mg 격자 간 면 간격(d-value)이 증가하는 경향을 나타내었다. 이상에서 제작한 마그네슘 코팅막의 결정성장 과정은 본 진공 플라즈마 PVD 공정중 증착가 더불어 흡착역할을 하는 Ar의 움직임에 따라 설명 가능하였다[1,2]. 코팅막의 양극분극(Polarization)측정 결과에 의하면, 공정압력이 높은 조건에서 제작한 막일수록 부동태 특성이 우수하여 내식성이 향상되는 경향을 나타내었다. 특히, 공정압력이 상대적으로 높은 50 mTorr 조건에서 제작된 코팅막이 표면 마그네슘 결정의 크기가 조밀하고 결정구조는 Mg(002)면과 Mg(101)면의 상대강도 비가 유사하여 내식성 가장 우수하였다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.402-415
• /
• 2001

Advantages of flash memories are their shock resistance and fast read speed, which is much faster than that of a HDD. Because of these characteristics, they are increasingly used in the traditional household electric appliance and portable handset and therefore, development of file systems which use them as storage medium is increasingly needed. But they have two problems as storage medium. First, data stored in them cannot be overwritten: it must be erased before new data can be stored. Unfortunately, this erase operation usually takes about one second. Consequently, updating data in flash memories takes long time. In this paper, their problem is solved by using a data update mechanism like LFS(Log-structured File System). Second, their erase operations are restricted. We propose novel cleaning policy in order to increase the life cycle. We implemented FAT file system, which is suitable to small storage medium and solved problems, which usually happen in implementing FAT. We evaluated the performance of sequential writes and random writes on our implemented flash file system.

• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.2
• /
• pp.1-13
• /
• 2015

Objectives Methicillin-Resistant Staphylococcus aureus (MRSA) is a human pathogen and a major cause of hospital-acquired infections. New antibacterial agents that have not been compromised by bacterial resistance are needed to treat MRSA-related infections. In this study, we investigated the antimicrobial activity ofethanol extract of Haedokgeumhwa-san (HGH) which prescription is composed of korean medicine against MRSA. Methods The antibacterial activity of HGH extract was evaluated against MRSA strains by using the Disc diffusion method, broth microdilution method (minimal inhibitory concentration; MIC), checkerboard dilution test, and time-kill test; its mechanism of action was investigated by bacteriolysis, detergent or ATPase inhibitors. The checkerboard dilution test was used to examined synergistic effect of ampicillin, oxacillin, ciprofloxacin, vancomycin, gentamicin and norfloxacin in combination with HGH ethanol extract. A time-kill assay was performed a survival curve which was obtained by plotting viable colony counts depending on time on bacterial growth. Results The minimum inhibitory concentration (MIC) of ethanol extract (HGH) ranged from 1,000 to $2,000{\mu}g/mL$ against all the tested bacterial strains, respectively. We are able to confirm that HGH extract has potentially strong antibacterial activity. In the checkerboard dilution test, fractional inhibitory concentration index of HGH in combination with antibiotics indicated synergy or partial synergism against S. aureus. A time-kill study showed that the growth of the tested bacteria was considerably inhibited after 8 hr of treatment with the combination of HGH with selected antibiotics. For measurement of cell membrane permeability, HGH $250{\sim}1,000{\mu}g/mL$ along with concentration of Triton X-100 (TX) and Tris-(hydroxymethyl) aminomethane (Tris) were used. In the other hand, N,N-dicyclohexylcarbodimide (DCCD) and Sodium azide ($NaN_3$) was used as an inhibitor of ATPase. TX, Tris, DCCD and $NaN_3$ cooperation against S. aureus showed synergistic action. Accordingly, antimicrobial activity of HGH was affected by cell membrane and inhibitor of ATPase. Conclusions These results suggest that Haedokgeumhwa-san extract has antibacterial activity, and that HGH extract offers a potential as a natural antibiotic against MRSA.

• Journal of Adhesion and Interface
• /
• v.2 no.1
• /
• pp.9-17
• /
• 2001

Curing behavior and interfacial properties were evaluated using electrical resistance measurement and tensile/compressive fragmentation test. Electrical resistivity difference (${\Delta}R$) during curing process was not observed in a bare carbon fiber. On the other hand, ${\Delta}R$ appeared due to the matrix contraction in single-carbon fiber/epoxy composite. Logarithmic electrical resistivity of the untreated single-carbon fiber composite increased suddenly to the infinity when the fiber fracture occurred under tensile loading, whereas that of the ED composite reached relatively broadly up to the infinity. Comparing to the untreated case, interfacial shear strength (IFSS) of the ED treated composite increased significantly in both tensile fragmentation and compressive Broutman test. Microfailure modes of the untreated and the ED treated fiber composite showed the debonding and the cone shapes in tensile test, respectively. For compressive test, fractures of diagonal slippage were observed in both untreated and the ED treated composite. Sharp-end shape fractures exhibited in the untreated composite, whereas relatively dull fractures showed in the ED Heated composite. It is proved that ED treatments affected differently on the interfacial adhesion and microfailure mechanism under tensile/compressive tests.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.172-179
• /
• 2013

Impact modifier reinforced polymers are frequently used. In this study, Izod impact test has been simulated to analyze the mechanism of impact reinforcement of Nylon6 which contains impact modifier. The modeling of rubber particles added to Nylon6 as an impact modifier has been attempted. Based on the modeling, simulation of Izod impact test has been performed to observe the distribution and direction of stress at the cross-section of impact specimen. Three computer simulation models for Nylon6 were investigated. Those were without impact modifier, containing impact modifier without surface treatment, and containing impact modifier with surface treatment in the Nylon6. Simulation results showed that the stress which originated at the notch surface propergated to the inside of specimen round a impact modifier. In addition to that, impact modifier reinforced Nylon6 specimen showed low stress ditribution in the cross-section specially at notch surface. Principal stress in perpendicular direction to crack was also lowered in impact modifier reinforced Nylon6. These enhanced impact resistance reduced and crack propergations. Through this study it was realized that the computer simulation can be utilized to investigate the property enhacement of composite materials.

• 한국균학회소식:학술대회논문집
• /
• 2018.05a
• /
• pp.33-33
• /
• 2018

Air-borne plant pathogenic fungus Fusarium graminearum and seed-borne plant pathogenic bacterium Burkholderia glumae are cause similar disease symptoms in rice heads. Here we showed that two pathogens frequently co-isolated in rice heads and F. graminearum is resistant to toxoflavin produced by B. glumae while other fungal genera are sensitive to the toxin. We have tried to clarify the resistant mechanism of F. graminearum against toxoflavin and the ecological reason of co-existence of the two pathogens in rice. We found that F. graminearum carries resistance to toxoflavin as accumulating lipid in fungal cells. Co-cultivation of two pathogens resulted in increased conidia and enhanced chemical attraction and attachment of the bacterial cells to the fungal conidia. Bacteria physically attached to fungal conidia, which protected bacterium cells from UV light and allowed disease dispersal. Chemotaxis analysis showed that bacterial cells moved toward the fungal exudation compared to a control. Even enhanced the production of phytotoxic trichothecene by the fungal under presence of toxoflavin and disease severity on rice heads was significantly increased by co-inoculation rather than single inoculation. This study suggested that the undisclosed potentiality of air-born infection of bacteria using the fungal spores for survival and dispersal.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1047-1054
• /
• 2009

Oral squamous carcinoma (OSC) cells present resistance to chemotherapeutic agents-mediated apoptosis in the late stages of malignancy. Advances in the understanding of bacterial toxins have produced new strategies for the treatment of cancers. It was demonstrated here that Pseudomonas aeruginosa exotoxin A (PEA) significantly decreased the viability of chemoresistant YD-9 cells in the apoptosis mechanism. Apoptotic manifestations were evident through changes in nuclear morphology and generation of DNA fragmentation. PEA treatment induced caspase-3, -6 and -9 cleavage, and activation. These events preceded proteolysis of the caspase substrates poly (ADP-ribose) polymerase (PARP), DNA fragmentation factor 45 (DFF45), and lamin A in YD-9 cells. The reduction of mitochondrial membrane potential, release of cytochrome c and SmacjDlABLO from mitochondria to cytosol, andtranslocation of AlF into nucleus were shown. While p53, p21 and $14-3-3{\gamma}$ were upregulated, cyclin Band cdc2 were downregulated by PEA treatment. Taken together, PEA induces apoptosis in chemoresistant YD-9 cells via activation of caspases, mitochondrial events and regulation of cell cycle genes.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.6
• /
• pp.849-859
• /
• 2018

Herpes simplex virus type 2 (HSV-2) infection has been a public health concern worldwide. It is the leading cause of genital herpes and a contributing factor to cervical cancer and human immunodeficiency virus (HIV) infection. No vaccine is available yet for the treatment of HSV-2 infection, and routinely used synthetic nucleoside analogs have led to the emergence of drug resistance. The small molecule $Retro-2^{cycl}$ has been reported to be active against several pathogens by acting on intracellular vesicle transport, which also participates in the HSV-2 lifecycle. Here, we showed that Retro-2.1, which is an optimized, more potent derivative of $Retro-2^{cycl}$, could inhibit HSV-2 infection, with 50% inhibitory concentrations of $5.58{\mu}M$ and $6.35{\mu}M$ in cytopathic effect inhibition and plaque reduction assays, respectively. The cytotoxicity of Retro-2.1 was relatively low, with a 50% cytotoxicity concentration of $116.5{\mu}M$. We also preliminarily identified that Retro-2.1 exerted the antiviral effect against HSV-2 by a dual mechanism of action on virus entry and late stages of infection. Therefore, our study for the first time demonstrated Retro-2.1 as an effective antiviral agent against HSV-2 in vitro with targets distinct from those of nucleoside analogs.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.10
• /
• pp.467-474
• /
• 2006

The effect of pressureless-sintered temperature on the densification behavior, mechanical and electrical properties of the $SiC-TiB_2$ electroconductive ceramic composites was investigated. The $SiC-TiB_2$ electroconductive ceramic composites were pressureless-sintered for 2 hours at temperatures in the range of $1,750{\sim}1,900[^{\circ}C]$, with an addition of 12[wt%] $Al_2O_3+Y_2O_3(6:4\;mixture\;of\;Al_2O_3\;and\;Y_2O_3)$ as a sintering aid. The relative density, flexural strength, vicker's hardness and fracture toughness showed the highest value of 84.92[%], 140[MPa], 4.07[GPa] and $3.13[MPa{\cdot}m^{1/2}]$ for $SiC-TiB_2$ composites of $1,900[^{\circ}C]$ sintering temperature at room temperature respectively. The electrical resistivity was measured by the Pauw method in the temperature ranges from $25[^{\circ}C]\;to\;700[^{\circ}C]$. The electrical resistivity showed the value of $5.51{\times}10^{-4},\;2.11{\times}10^{-3},\;7.91{\times}10^{-4}\;and\;6.91{\times}10^{-4}[\Omega{\cdot}cm]$ for ST1750, ST1800, ST1850 and ST1900 respectively at room temperature. The electrical resistivity of the composites was all PTCR(Positive Temperature Coefficient Resistivity). The resistance temperature coefficient showed the value of $3.116{\times}10^{-3},\;2.717{\times}10^{-3},\;2.939{\times}10^{-3},\;3.342{\times}10^{-3}/[^{\circ}C]$ for ST1750, ST1800, ST1850 and ST1900 respectively in the temperature ranges from $25[^{\circ}C]\;to\;700[^{\circ}C]$. It is assumed that because polycrystallines, such as recrystallized $SiC-TiB_2$ electroconductive ceramic composites, contain of porosity and In Situ $YAG(Al_5Y_3O_{12})$ crystal grain boundaries, their electrical conduction mechanism are complicated. In addition, because the condition of such grain boundaries due to $Al_2O_3+Y_2O_3$ additives widely varies with sintering temperature, electrical resistivity of the $SiC-TiB_2$ electroconductive ceramic composites with sintering temperature also varies with sintering condition. It is convinced that ${\beta}-SiC$ based electroconductive ceramic composites for heaters or ignitors can be manufactured by pressureless sintering.