• 대한소아치과학회지
• /
• 제45권3호
• /
• pp.290-298
• /
• 2018

이 연구는 유전치 비와동성 우식 병소에 레진침투법을 시행할 때 sodium hypochlorite(NaOCl) 제단백 후 phosphoric acid($H_3PO_4$) 산부식 처리에 따른 법랑질 표면구조 및 레진 침투깊이 변화를 알아보았다. 90개의 발치된 비와동성 병소의 유전치를 전처리에 따라 5개 군으로 나누었다 : I군 hydrochloric acid(HCl) 2분; II군 NaOCl 1분, $H_3PO_4$ 1분; III군 NaOCl 2분, $H_3PO_4$ 1분; IV군 NaOCl 1분, $H_3PO_4$ 2분; V군 NaOCl 2분, $H_3PO_4$ 2분. 그 중 15개는 전계방사주사전자현미경을 통해 표면을 관찰하였고, 75개는 레진침투 후 공초점레이저주사현미경을 통해 병소 깊이와 레진 침투깊이를 측정하여 레진 침투도를 도출했다. NaOCl 적용 시간이 길어질수록 법랑질 산부식 I, II형 비율이 증가하였다. 레진 침투도는 V군이 II, III군에 비해 통계학적으로 유의하게 높았고(p < 0.05), IV, V군은 유의할 만한 차이가 없었다. 레진침투법은 유전치 초기 우식 병소의 치료로 사용될 수 있으며, 전처리 제로 15% HCl 산부식 대신 5.25% NaOCl 제단백 후 35% $H_3PO_4$ 산부식이 대안으로 고려될 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.1-16
• /
• 1995

The purpose of this study was to investigate the effect of dentin bonding agents on the bond strength of composite resin restorations in case of applying the dentin bonding agents to acid etched enamel surfaces. Freshly extracted 364 bovine anterior teeth were selected as a adherents. 320 enamel specimens were divided into two groups(unetched group (1) and etched group (2) for testing the shear bond strength, 40 specimens were used for the hardness testing, and 4 specimens of rest were to observe the resin-tag formation into etched enamel surfaces. All surfaces of enamel specimens were polished with 320~1500 SiC paper under continuous running water. In Group (1), 100 enamel specimens were polished and unetched. 220 polished enamel specimens in Group (2) were etched with 37 % phosphoric acid solution for 60 seconds, washed with water for 20 seconds, and dried with a light air pressure for 60 seconds. Three kinds of dentin bonding agents(Gluma, Prisma, Scotchbond 2) were evaluated the effect on the bond strength to conditioned enamel surfaces. Shear bond strengths were measured on the three cases such as a coating of primer only, a coating of sealer only, and a sequential coating of primer and sealer to acid etched enamel surfaces were compared with the bond strengths measured by the coating of enamel bonding agent followed by the bonding of composite resin (Photo clearfil bright, Kuraray, Japan) to unetched and acid etched enamel surfaces. In addition, the hardness tested on the adhesive fractured surface between composite resin enamel as a mean of evaluation of a factor whether the mechanical bond strengths were affected and the penetration of dentin bonding agents into etched enamel surfaces was also observed. Bond strengths were measured using the method of shear bond strength by a universal testing machine (Instron-4467, USA), statistical test were applied to the results using a one way analysis variance(ANOVA), and hardness was measured by the Vicker's Hardness Tester(MHT-i, Matsuzawa, Japan) and the penetration of the resins were observed by the SEM (Hitachi, S-2300, Japan). The following conclusions were drawn; 1. Enamel bonding agent showed to affect the improvement of bond strength of composite resin to enamel surface both unetched and etched. 2. Dentin bonding agents could be resulted in increase of bond strength to unetched enamel surface, but there were no statistical significances. 3. Bond strengths to etched enamel surface were significantly decreased with a coating of dentin primer only. 4. Coating of sealer only and coating of primer and sealer noticed the similar bond strengths of composite resin to etched enamel using the enamel bonding agents. 5. The applying method proved to be more effective than the kinds of dentin bonding agents on the bond strength of composite resin to etched enamel than the kind of dentin. 6. Vicker's hardness numbers of dentin bonding agents were lower than that of composite resin, but the degree of penetration of dentin bonding agents into etched enamel surfaces was excellent.

• 대한소아치과학회지
• /
• 제45권2호
• /
• pp.179-184
• /
• 2018

본 연구는 유전치 순면의 백색병소에 대한 표면처리 방법에 따른 레진 침투법의 침투 깊이를 공초점 레이저 주사 현미경으로 조사함으로써, 유치의 초기 우식병소에 대한 레진침투법 적용 과정에서, 염산 이외의 대안적 표면처리 방법을 모색할 목적으로 시도되었다. 15% 염산 단독으로 2분간 산부식 한 대조군과 35% 인산 단독으로 2분간 산부식을 시행한 I군 간의 유의한 차이는 보이지 않았다. 하지만 이 두 그룹과 인산 산부식 전 치면세마용 퍼미스 또는 연마용 metal strip으로 표면 전처리를 한 그룹 간에는 레진 침투율에서 유의한 차이를 확인하였다(p < .05). 유전치 초기 우식 병소에 레진 침투법을 시행할 때에는 35% 인산 단독 산부식만으로도 15% 염산을 이용한 산부식에 비견할 만한 침투 효과를 보이는 것을 확인하였다. 또한 레진의 침투 효과를 높이기 위해서는 산부식 전 병소 표면에 기계적 마모술을 적용하는 것이 효과적인 방법이 될 수 있음을 보여주었다. 이러한 방법은 소아치과 영역에서 레진침투법을 사용하기에 비교적 안전하고 쉽게 활용할 수 있는 표면처리 방법이라 볼 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• Restorative Dentistry and Endodontics
• /
• 제31권5호
• /
• pp.337-343
• /
• 2006

본 연구에서는 색소 침투법을 이용한 5급 복합레진 수복물의 미세누출도와 주사전자 현미경을 이용한 변연적합도를 측정하고 두 방법 사이의 상관성을 평가하고자 하였다. 발거된 사람의 대구치 20개의 협면에 고속의 330번 버를 이용하여 5급 와동을 (백아법랑경계부를 중앙으로 가로 4 mm, 세로 3 mm, 깊이 1.5 mm) 형성하고, 평가시 참고점으로 사용하고자 1/2번 원형 버로 6개의 함몰부를 만들었다. 제조사의 지시에 따라 단일 단계의 올인원 접착제인 Xeno III로 치면을 처리한 다음, 미세혼합형 복합레진인 Esthet X로 단일 충전하였다. 시편을 식염수에 1일간 보관한 후 Sof-Lex 시스템으로 마무리 및 연마하였다. 이후 5도와 55도에서 1000회 열순환시킨 다음, 50%질산은 용액을 이용하여 침투시켰다. 실리콘 고무 인상재와 폴리우레탄 모형재로 수복물 주변의 레진 복제물을 제작하고 금도금한 다음 주사전자현미경으로 외부 및 내부 변연부의 변연적합도를 측정하였다. 또한 참고점을 기점으로 수복물을 3분한 다음, 미세누출도를 측정하였다. 내부 및 외부 변연적합도와 미세누출도 평가법 사이의 상관관계는 Spearman's rho test를 이용하여 다음과 같은 결과를 얻었다. 1. 미세누출도와 각각의 외부 및 내부 변연 적합도는 유의한 상관관계를 보였다 (p <0.01). 2.내부와 외부의 변연 적합도 사이에는 유의한 상관관계를 보이지 않았다.

• 구강회복응용과학지
• /
• 제27권1호
• /
• pp.81-90
• /
• 2011

resin infiltrant의 초기 우식 병소에 침투를 SEM과 CLSM을 사용하여 관찰하고, resin infiltrant와 3가지 접착제(All-bond 2, Scotchbond Multi-purpose, Clearfil SE bond)의 pH와 점도를 평가하고, 영구치에 resin infiltrant 적용 후 표면 조도와 미세경도의 변화를 측정하였다. 점도(Pa.s)는 resin infiltrant($0.173{\pm}0.012$), All-bond 2($0.754{\pm}0.030$), Scotchbond Multi-purpose($1.46{\pm}0.137$), Clearfil SE bond($1.28{\pm}0.125$)로 측정되었다. pH는 resin infiltrant (4.7), All-bond 2(7.5), Scotchbond Multi-purpose(8.2), Clearfil SE bond(4.67)로 측정되었다. resin infiltrant의 적용은 적용하지 않은 시편과 비교할 때 표면 조도와 미세경도에 유의한 차이를 보이지 않았다.(p>0.05).

• 대한소아치과학회지
• /
• 제39권1호
• /
• pp.1-10
• /
• 2012

본 연구는 infiltrant resin을 침투시킨 초기 우식 병소의 특성을 평가하기 위해 법랑질의 깊이에 따른 경도를 측정하고, 병소 내로의 레진 침투양상을 분석하며, 미세누출 정도를 관찰하여 다음의 결과를 얻었다. 건전 법랑질에 대한 초기 우식 법랑질의 경도 백분율은 표층(5~40 ${\mu}m$) 64.6%, 병소본체(60~350 ${\mu}m$) 24.6%였으며, infiltrant resin을 침투시킨 병소의 경도 백분율은 72.1%로 나타났다. 5~350 ${\mu}m$의 전 깊이에서, infiltrant resin을 침투시킨 병소는 비처치 우식 병소보다 경도가 유의하게 높았지만 정상 법랑질에 비해서는 경도가 유의하게 낮았다(p<0.05). FESEM 관찰 결과 탈회된 법랑질 내부로 비교적 균일하게 침투한 레진 테그가 관찰되었으며, 침투깊이는 433 ${\mu}m$(282-501)로 측정되었다. 열순환 처리 후 13개의 치아에서 미세누출이 관찰되지 않았고, 5개에서 병소 외측 절반, 2개에서 병소 내측 절반까지 미세누출이 관찰되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.77-82
• /
• 1995

With the aim to utilize pine wood(Pinus densiflora Sieb. et Zucc.) as an interior building materials, such as flooring material, monoethylene glycol(MEG) resin solution was impregnated into greenwood. Specimens of three different qualities, that is, normal wood, resinous wood and compression wood, were prepared. Distribution of resin element(phosphorus) in MEG resin solution-impregnated woods and preservative effectiveness against brown rot fungi(Tyromyces palustris and Serpula lacrymans) of these woods were investigated. The results were as follows: 1. The concentration of phosphorus into cell walls of resinous wood and compression wood was lower compared to that of normal wood. This shows that the quality of wood has an influence on the penetration of MEG resin solution into the wood. It was shown from a leaching test that MEG resin could be leached out easily from the cell walls. 2. The resinous wood and compression wood, even without MEG resin solution impregnation had high decay resistance. For normal wood, significant improvement of preservative effectiveness was observed after impregnation of MEG resin solution. It was shown that MEG resin was leached out from the woods after leaching test, resulting in the reduction of preservative effectiveness. From this result, suitability of MEG resin solution-impregnated woods as an interior materials was recognized.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.69-75
• /
• 2009

본 연구에서는 폐윤활유를 이용하여 아스팔트 포장도로의 균열 보수에 주로 사용하는 아스팔트 실란트를 제조하였다. 아스팔트(AP-5), SBS 삼블록 공중합체(triblock copolymer), 점착제(석유수지) 및 산화방지제를 폐윤활유와 혼합하여 콘 침입도, 연화점, 신도, 흐름성, 인장 접착 신율 및 원상회복률을 측정하였다. 폐윤활유 함량이 증가함에 따라 아스팔트 실란트의 콘 침입도는 증가하였고 연화점, 신도 및 원상회복률은 감소하였다. 증량제로 탈크를 첨가할 경우 함량에 비례하여 연화점 및 원상회복률은 증가하였으나 콘 침입도, 신도 및 인장 접착 신율은 감소하였다. 석유수지 함량을 크게 줄여 ASTM 규격에 적합하면서도 가장 경제적인 균열 보수용 아스팔트 실란트를 제조할 수 있었다.

• 대한치과의사협회지
• /
• 제15권11호
• /
• pp.757-761
• /
• 1977

The purpose of this study was to evaluate the marginal sealing ability of Hipol composite resin. Using freshly extracted human teeth and 2% acquous methylene blue, the marginal leakage of dye in restorative materials such as Hi-pol, Adaptic, Nuvasystem, Epolite and Amalgam was investigated at 37℃ and under temperature cycling between 4℃ and 60℃. The results were as follows; 1. All the filling materials revealed the penetration of dye between cavity walls and restorations. 2. Hi-pol and Adaptic showed more marginal leakage than other materials and the degree of dye penetration in Hi-pol was similar to that of Adaptic. 3. Nuva system showed the least marginal leakage at 37℃ and under temperature cycling between 4℃ and 60℃. 4. Under temperature cycling, all materials showed a slight increase in marginal leakage except Epolite, which showed the greastest change in leakage.