• 구강회복응용과학지
• /
• 제33권1호
• /
• pp.42-46
• /
• 2017

부식이란 산성의 화학적 물질에 의한 치아 경조직의 손상으로 정의된다. 이에 대한 원인인 산성 음식, 약물, 작업환경 등의 외부적 원인과 위장관 장애에 의한 위산의 역류나 거식증에 의한 의도적 구토의 내부적 원인에 의해 발생된다. 이는 임상적 증상의 심각도에 따라 레진 충전, 라미네이트 수복 또는 전장관 수복으로 치료한다. 본 증례는 잦은 산성 과일의 섭취로 인한 전치부 순측 부식 및 거식증으로 인한 의도적 구토로 전치부 구개측 부식이 일어난 드문 상황에 대한 치료이다.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.165-174
• /
• 1990

현재 임상에서 사용되고 있는 니켈-크롬합금(Washiloy Soft, Kamemizu Chemical Inc. Ltd., Japan)을 이용하여 Chamfer, shoulder, shoulder with a $45^{\circ}$ bevel의 각 치경부 변연의 형태에 따른 시멘트층 피막후경을 교합면 및 치경부에서 측정, 비교하여 다음과 같은 결론을 얻었다. 금관의 교합면 장착정도는 chamfer가 가장 우수하고, 다음으로는 shoulder, shoulder with a $45^{\circ}$ bevel의 순이며, 이들 간에는 유의성 있는 차이를 나타내었다(p<.05). 금관의 치경부 적합도는 chamfer가 가장 우수하고, 다음으로 shoulder with a $45^{\circ}$ vevel, shoulder의 순이며, 이들 간에는 유의성 있는 차이를 나타내었다(p<.05).

• 대한장애인치과학회지
• /
• 제14권1호
• /
• pp.31-35
• /
• 2018

부산대학교 치과병원 소아치과에 내원한 Shell teeth에 이환된 소아 환자를 전신마취 하에 치료하였다. 임상검사시 다수 치아의 치관 파괴와 치수 노출 및 상악 유전치 잔존치근이 관찰되었다. 방사선검사상 전반적인 유치열에서 정상보다 큰 크기의 치수강과 넓은 치근관 및 얇은 경조직 층이 존재했으며 발생중인 영구치 치배의 형태이상이 관찰되었다. 환자의 언니와 아버지를 포함한 부계 가족 구성원 일부에서 상아질형성부전증 병력이 조사되었다. 치료시 수복이 불가능한 치아는 발거하였고 보존 가능한 치아는 치수치료 및 기성금속관, 복합레진 수복치료를 시행하였다. 치료 결과 환자의 통증이 감소하였고 저작능력이 회복되었다. 주기적인 내원 및 경과관찰이 요구된다.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.381-387
• /
• 2018

PURPOSE. Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with lingual slots, known as retrievable cement-type slots (RCS). MATERIALS AND METHODS. We fabricated six types of titanium abutments (10 of each type) with two different heights (4 mm and 6 mm), three different convergence angles ($8^{\circ}$, $10^{\circ}$, and $12^{\circ}$), a sloped shoulder margin (0.6 mm depth), a rectangular shape ($6mm{\times}6.5mm$) with rounded edges, and a rectangular ledge ($2mm{\times}1mm$) for the RCS. One monolithic zirconia crown was fabricated for each abutment using a dental computer-aided design/computer-aided manufacturing system. The abutments and crowns were permanently cemented together with dual-curing resin cement, followed by 24 hours in demineralized water at room temperature. Using a custom-made device with a slot driver and torque gauge, we recorded the torque ($N{\cdot}cm$) required to remove the crowns. Statistical analysis was conducted using multiple regression analysis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Removal torques significantly decreased as convergence angles increased. Multiple regression analysis showed no significant interaction between the abutment height and the convergence angle (Durbin-Watson ratio: 2.186). CONCLUSION. Within the limitations of this in vitro study, we suggest that the retrievability of cement-retained implant prostheses with RCS can be maintained by adjusting the abutment height and convergence angle, even when they are permanently cemented together.

• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.504-509
• /
• 2006

소아치과는 소아와 청소년의 구강상태에 대하여 보존, 교정, 치주, 외과치료 등 다방면의 치료를 복합적으로 시행한다는 점에서 타분야와 구분된다. 초창기의 소아치과학은 유치와 영구치의 우식의 치료, 발치 등에 국한되었으나, 최근에는 교정, 소 수술, 심미, 예방치료 등으로 진료의 범주가 확대되고 있다 2005년 11월 현재 소아와 청소년을 대상으로 하는 개인치과에서 근무하는 치과의사 50명을 대상으로 설문지를 발송하고 회송된 설문지 21매를 토대로 진료현황을 분석한 결과 다음과 같은 결론을 얻었다. 1. 일주일 간 평균적으로 진료하는 환자의 수는 82.4명이었고, 각 환자당 평균적으로 치료받는 치아의 수는 2.35개였다. 2, 전체 치료 중 예방치료가 15.7%, 수복치료가 55.7%, 치수치료가 15.6%, 외과치료가 10.5%, 교정치료가 2.4%를 차지하였다. 3. 수복치료 중 아말감이 3.8%, 글래스 아이오노머가 5.5%, 복합레진이 63.0%, 스테인레스 기성금관이 277%를 차지하였다.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.417-430
• /
• 1997

The purpose of this study was to compare the fracture resistance of copy-milled and conventional In-Ceram crown. Four groups of ten uniform sized all-ceramic crowns were fabricated. In-Ceram Spinell and In-Ceram Alumina crowns were fabricated as control group, Celay In-Ceram Spinell and Celay In-Ceram Alumina crowns were fabricated as test group. All specimen were cemented on stainless steel master die with resin cement, and stored in $37^{\circ}C$ water for 1 day prior to loading in Instron testing machine. Using a steel ball at a crosshead surfed of 0.5mm/min, the crowns were loaded at $30^{\circ}C$ angle until catastrophic failure occurred. The results obtained were as follows : 1. With the value of $984.8N{\pm}103.67N$, the strength of Celay In-Ceram Alumina crowns had a significantly higher fracture strength than conventional In-Ceram Alumina crowns ($876.2N{\pm}92.20N$) (P<0.05) 2. The fracture strength of Celay In-Ceram Spinell crowns($706.3{\pm}70.59N$) was greater than that of conventional In-Ceram Spinell crowns($687.4{\pm}90.26N$), but there was no significant difference(P>0.05). 3. The In-Ceram Alumina crowns had a significantly higher fracture strength than In-Ceram Spinell crowns in both methods(P<0.05). 4. Ther order of fracture strength was as followed : Celay In-Ceram Alumina, In-Ceram Alumina, Celay In-Ceram Spinell and In-Ceram Spinell crowns

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.273-292
• /
• 1998

The purpose of this study was to evaluate marginal fit of four all-ceramic crown systems 1) conventional In-Ceram, 2) copy-milled In-Ceram using Celay system, 3) IPS Empress, 4) OPC(Optimal Pressable Ceramic). All ceramic crowns were made on epoxy dies. The fabricated crowns were sandblasted, cleaned with ultrasonic cleansing, silanated, and cemented with Bistite composite resin cement. the selected marginal areas of the crowns were the labial, lingual, mesial, and distal surface. Each selected area of surface was $0.6{\times}1.6mm$ in dimension. The image of each marginal area was captured to computer files using DT-55 Frame Grabber and light microscope connected CCD camera. The marginal gaps were measured every $70{\mu}m$ using computer image analysis program. The results obtained were summarized as follows : 1. The marginal fit of four all-ceramic crowns were significantly different from each other(p<0.01), and mean marginal fit values obtained were $31.42{\pm}16.52{\mu}m$ in conventional In-Ceram, $55.45{\pm}27.90{\mu}m$ in copy-milled In-Ceram using Celay system, $44.36{\pm}24.59{\mu}m$ in IPS Empress, $47.21{\pm}20.42{\mu}m$ in OPC. 2. In the marginal fit of conventional In-Ceraw and copy-milled In-Ceram crowns using Celay system there was no significant difference between mesiodistal and buccolingual surface, but in the marginal fit of IPS Empress and OPC crowns, there was significant difference between mesiodistal and buccolingual surface(p<0.01). 3. The marginal fit of four kinds of all-ceramic crowns was clinically acceptable.

• Restorative Dentistry and Endodontics
• /
• 제41권1호
• /
• pp.37-43
• /
• 2016

Objectives: The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. Materials and Methods: A full veneer crown and an mesio-occluso-distal (MOD) inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU) and experimental nano-composite CAD/CAM blocks (EB) under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. Results: Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000). In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001). Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000). Conclusions: The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.224-234
• /
• 2008

이 연구의 목적은 6종의 자가부식 프라이머 접착시스템에서 제조사에서 추천한 프라이머 적용시간과 2배의 프라이머 적용시간에 따른 법랑질에 대한 미세전단 결합강도와 전자현미경적 소견을 비교하기 위하여 시행하였다. 이 연구의 결과 법랑질에 대한 자가부식 프라이머 접착제의 결합강도는 제조사에서 추천한 프라이머의 적용시간보다 프라이머의 적용시간을 2배 증가시킨 경우 높게 나타났으며, 특히 pH가 높은 프라이머를 사용하였을 때 통계학적으로 높은 결합강도를 나타내었다. 이는 법랑질에서 pH가 높은 프라이머를 사용할 경우, 제조사에서 추천한 시간보다 더 긴 시간동안 적용하는 것이 결합강도를 증가시킬 수 있을 것으로 생각된다.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.439-448
• /
• 2016

PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.