• Restorative Dentistry and Endodontics
• /
• v.41 no.2
• /
• pp.130-136
• /
• 2016

Objectives: This study investigated the effect of red and white wine on color changes of nanofilled and nanohybrid resin composite. Materials and Methods: Sixty specimens of each resin composite were prepared. Baseline data color values were recorded using a spectrophotometer. Three groups of discs (n = 20) were then alternately immersed in red, white wine, and deionized water (as a control) for twenty five minutes and artificial saliva for five minutes for four cycles. Specimens were then stored in artificial saliva for twenty two hours. This process was repeated for five days following immersion in artificial saliva for two days. Subsequently, the process was repeated again. Data were analyzed by two-way repeated ANOVA, one-way ANOVA, and Tukey's HSD. Results: Red wine caused significantly higher color change (${\Delta}E^*$ > 3.3) than did white wine and deionized water (p < 0.05). Nanohybrid resin composites had significantly more color changes than nanofilled resin composite (p < 0.05). Conclusions: The effect of red and white wine on the color changes of resin composite restorative materials depended upon the physical and chemical composition of the restorative materials and the types of wine.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.6-12
• /
• 1963

Amino acid composition of Makjang was determined by combined usage of ion exchanged resin and paper chormatography in the following states. a. A fraction soluble in water b. Hydrolysate of the whole Makjang c. Same as a. (p.p.t. formed by tungstic acid or trichloroacetic acid being removed) d. Hydrolysate of c. (T and TCA) By comparing amino acid composition of Makjang with that of its raw material, we found that decomposition of essential amino acids during brewing is slight. From the amino acid composition of a,b,c,d, we discussed the ratio of amino acid liberation during brewing and assumed that Makjang contains peptide-like substances composing of glutamic acid and aspartic acid.

• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.168-173
• /
• 2010

Flame retardant halogen containing compounds have been replaced as environmentally safe material which does not contain hazardous materials generating toxic gas. Self-extinguishing epoxy resin compositions have been studied in order to produce eco-friendly epoxy molding compound, which is used as insulating materials in semiconductor. We developed self-extinguishing epoxy resin compositions which do not contain halogen compounds with new epoxy resin (E3). The new epoxy molding compound (EMC-1) showed high flame resistance (UL-V0) and high thermal resistance ($451.9^{\circ}C$ at 5 wt% loss) enough to use as eco-friendly material.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.238-242
• /
• 1998

Wood powder filled phenolic resin composites of different composition were prepared and their mechanical properties were investigated for optimum conditions. The composites showed maximum mechanical strength when the phenolic resin content was 45 wt%. Polyurethane prepolymer(PU) was evaluated as a modifier of the phenolic resin composites. Blocking of the isocyanates in the PU with phenol was necessary for homogeneous mixing of raw materials for the components. Maximum mechanical strength of the PU modified composites was observed when the PU content was 5 wt%. It was found that the mechanical strength of the composites cured at $210^{\circ}C$ were higher than those of the composites cured at $150^{\circ}C$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.199-211
• /
• 2004

The drying speed of gravure ink are very fast because of evaporation drying type. The gravure ink are fitly selected variety resin and solvent for a wide range printing are adopted. Moreover, after-manufacture handling is necessary to various purposes. Though composition of gravure ink are same those of another printing ink, the viscosity of it are vary low compare with another printing inks. As property of variety printed matters, improvement of performance of printing layer and suitable after-manufacture handling, the more research of gravure ink are to be continue for development of printing technology. Generally, the gravure ink are made up resin, pigment, solvent and additive. Especially solvent are fitly selected for solution of resin, viscosity, and drying speed. Furthermore, it tis care of bad smell of remaining resin, poison and danger of fire of it. Because of the prevention of air pollution as restriction deflation of solvent, custody of dangerous object and improvement of work environment as labor safety hygiene and fire-low, the environment restriction of printing business become strict. This study has purpose of development of gravure ink of involved 30% below of alcohol is used for PVC film printing.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.231-240
• /
• 2016

The change in chemical compositions of leachate and medium density fiberboard (MDF) from a laboratory-scale simulated landfill which constructed in a plastic container containing alternating layers of soil and MDF was investigated to evaluate decomposing of MDF in soil. Four treatments were conducted: 1) MDF in soil, 2) MDF only, 3) cured UF resin in soil, and 4) soil only. Molecular weight (MW) distribution of compounds in leachate from soil only treatment did not change over time. In UF resin in soil treatment, the MW distribution shifted to a lower MW distribution over time, while the peak shifted to the left indicated changing to higher MW distribution in leachate from treatment 1 and 2 contained MDF. Higher percent nitrogen in leachate was observed in MDF containing treatments due to the UF resin in the MDF. The percent carbon slightly increased in MDF only while that greatly decreased in MDF in soil treatment maybe due to bacterial activity. The percent of extractable materials from the MDF decreased greatly on day 35 compare to day 0, and subsequently did not change much on day 77. In contrast, percent holocellulose and lignin did not change much over time. No structural change of the wood fiber in MDF occurs during the study. Water-soluble materials from MDF in soil contributed the change in chemical composition of leachate.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.460-465
• /
• 2013

Plate-shaped inorganic particles are coated onto a stainless steel substrate by the electrophoretic deposition of a precursor slurry which includes the inorganic particles of $Al_2O_3$ and polymer resin in mixed solvents to mimic the abalone shell structure, which is a composite of plate-shaped inorganic particles and organic interlayer binding materials with a layered orientation. The process parameters of the electrophoretic deposition include the voltage, coating time, and conductivity of the substrate. In addition, the suspension parameters are the particle size, concentration, viscosity, conductivity, and stability. We prepared an organic-inorganic composite coating with a high inorganic solid content by arraying the plate-shaped $Al_2O_3$ particles and electrophoretic resin via an electrophoretic deposition method. We analyzed the effect of the slurry composition and the electrophoretic deposition process parameters on the physical, mechanical and thermal properties of the coating layer, i.e., the thickness, density, particle orientation, Young's modulus and thermogravimetric analysis results.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.44-53
• /
• 1994

This research was carried out to investigate the effect of paper sludge addition on formaldehyde emission, and physical and mechanical properties of UF-particleboard. In order to investigate the effect of paper sludge addition to resin, particleboards were bonded with urea-formaldehyde resins containing 5, 10, 15% paper sludge powders of three types(A Type: -200 mesh, B Type: -100~+200 mesh. C Type: -50~+100 mesh), based on weight of resin solid. Also the effect of paper sludge addition to furnish was studied from particleboards fabricated with ratios of sludge to particle of 5:95, 10:90, 15:85 based on oven-dry weight. Tests were conducted on the manufactured particleboards to determine formaldehyde emission, bending properties, internal bond strength and thickness swelling. The obtained results were summarized as follows: The addition of paper sludge powder to resin yielded a higher pH of cured resin. Formaldehyde emission decreased with the increase of paper sludge powder addition to resin and paper sludge composition ratio to furnish. Particleboard bonded with urea-formaldehyde resin containing paper sludge powder and particleboard mixed with paper sludge have similar bending properties(MOR, MOE) and thickness swelling compared with control particleboard. Internal bond strength of particleboards treated with paper sludge were lower than that of control particleboard. The use of paper sludge as scavenger was achieved reduction of formaldehyde emission without depression of physical and mechanical properties of particleboard. Also the use of paper sludge was able to concluded that there is possibility of partial substitution of wood particle materials.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.177-183
• /
• 2018

PURPOSE. The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP. MATERIALS AND METHODS. Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer's instructions. After storage in distilled water at $37^{\circ}C$ for 24 h, the bonded samples were sectioned longitudinally to produce $1.0{\times}1.0mm$ beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's post-hoc tests and the level of significance was set at 0.05. RESULTS. The lowest mean microtensile bond strength was obtained for the NACP group. Tukey's test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67). CONCLUSION. Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.4
• /
• pp.223-231
• /
• 2019

PURPOSE. The purpose of this study was to evaluate the shear bond strength (SBS) of an indirect resin composite (IRC) to the various resin matrix ceramic (RMC) blocks using different surface treatments. MATERIALS AND METHODS. Ninety-nine cubic RMC specimens consisting of a resin nanoceramic (RNC), a polymer-infiltrated hybrid ceramic (PIHC), and a flexible hybrid ceramic (FHC) were divided randomly into three surface treatment subgroups (n = 11). In the experimental groups, untreated (Cnt), tribochemical silica coating (Tbc), and Neodymium-Doped Yttrium Aluminum Garnet (Nd:YAG) laser irradiation (Lsr) with 3 W (150 mJ/pulse, 20 Hz for 20 sec.) were used as surface treatments. An indirect composite resin (IRC) was layered with a disc-shape mold ($2{\times}3mm$) onto the treated-ceramic surfaces and the specimens submitted to thermal cycling (6000 cycles, $5-55^{\circ}C$). The SBS test of specimens was performed using a universal testing machine and the specimens were examined with a scanning electron microscope to determine the failure mode. Data were statistically analyzed with two-way analysis of variance (ANOVA) and Tukey HSD test (${\alpha}=.05$). RESULTS. According to the two-way ANOVA, only the surface treatment parameter was statistically significant (P<.05) on the SBS of IRC to RMC. The SBS values of Lsr-applied RMC groups were significantly higher than Cnt groups for each RMC material, (P<.05). Significant differences were also determined between Tbc surface treatment applied and untreated (Cnt) PIHC materials (P=.039). CONCLUSION. For promoting a reliable bond strength during characterization of RMC with IRC, Nd:YAG laser or Tbc surface treatment technique should be used, putting in consideration the microstructure and composition of RMC materials and appropriate parameters for each material.