• 대한토목학회논문집
• /
• 제12권3호
• /
• pp.215-220
• /
• 1992

최근 선진 외국은 MR을 적용한 합리적인 포장해석-설계법의 이용을 확대해 나가고 있으며 각 국의 고유한 포장재료에 대한 신뢰성있는 시험방법 및 MR특성에 관한 연구들이 활발히 수행되고 있다. 따라서 국내 포장재료에 대한 MR특성 연구는 매우 중요하며, 특히 대단위 국토건설과 함께 골재난에 직면하고 있는 우리의 실정으로 보아 석탄화력발전소의 산업폐기물인 석탄회를 포장재료로 활용하기 위한 석탄회의 MR특성 연구는 매우 의의 깊은 일이다. 본 연구는 석탄회를 건설재로서의 대량 활용을 위하여 국내 5개 화력발전소에서 부산되고 있는 저희와 비회 그리고 중부지역의 4개 화강토를 연구 대상으로 하여, AASHTO 시험법에 의한 MR특성을 규명하고 MR-CBR상관관계를 규명한 것이다.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.19-25
• /
• 2010

This study was conducted to determine the resilient modulus (Mr) and the unconfined compressive strength (UCS) of two recycled roadway materials such as recycled pavement material (RPM) and road surface gravel (RSG) with or without cement kiln dust (CKD). The recycled materials were blended with two CKD contents (5, 10 %) and 28 day curing time. Mr and UCS tests were also conducted after 10cycles of freezing and thawing to asses the impact of freeze-thaw cycling. Mr was determined conducting by the laboratory test method described by NCHRP 1-28A. Stabilized RPM and RSG had a modulus and a strength higher than unstabilized RPM and RSG. Mr and UCS of RPM and RSG mixed with CKD increased with increasing CKD content. The results indicated that the addition of CKD could be improved the strength and the stiffness of RPM and RSG. Therefore, RPM, RSG and CKD could be used as an effective materials in the reconstruction of roads.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.83-94
• /
• 2013

PURPOSES : In Korea, most designs of pavement had been mainly performed by considering CBR of granular materials before KPRP(Korea Pavement Research Program) and 86 AASHTO design method were introduced. Since then, the trend of the pavement designs gradually have moved to using mechanical characteristics throughout the resilient modulus based on the test results up to recently. In this study, we should like to research the mechanical characteristics of paving materials containing Recycled aggregates through the cyclic loading triaxial compression tests. METHODS : The kinds of materials were tested; coarse grained subbase materials, refining aggregates base materials and recycled aggregates. RESULTS : The present study aims to figure out the resilient modulus of paving materials containing Recycled aggregates through the cyclic loading triaxial compression tests. CONCLUSIONS : The test results revealed that the engineering properties of the recycled aggregates were more excellent than the those of others.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.945-949
• /
• 2002

This part of specifies the method for determining the dynamic stiffness of resilient materials used under floating floors. Dynamic stiffness is one of the parameters that determine the sound insulation of such floors in dwellings. This part applies to the determination of dynamic stiffness per unit area of resilient materials with smooth surfaces used in a continuous layer under floating floors in dwellings

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.392.1-392
• /
• 2002

This part of specifies the method for determining the dynamic stiffness of resilient materials used under floating floors. Dynamic stillness is one of the parameters that determine the sound insulation of such floors in dwellings. This part applies to the determination of dynamic stiffness per unit area of resilient materials with smooth surfaces used in a continuous layer under floating floors in dwellings.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.661-667
• /
• 2004

The characteristics of noise and vibration by a heavy impact source was studied. The triggering method was used for increasing the reliability and stability to measure the level of sound pressure. sound intensity and vibration acceleration. A simple finite element model and a rigid body analysis method were suggested to calculate the natural frequencies of the multi-layer floor system. The results show that the resilient materials decrease the natural frequency of the reinforced concrete slab, make a resonance with dominant driving frequency in the low frequency region, and increase the vibration and noise level. A simple finite element model and rigid body models was suggested to calculate the natural frequencies of the floor systems.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권1호
• /
• pp.53-61
• /
• 2015

이 연구에서는 층간소음을 억제하기 위하여 사용되는 뜬바닥구조의 구조거동을 실험을 통하여 평가하였다. 최근 층간소음을 억제하기 위하여 연질의 완충재가 사용되며, 이로 인하여 마감모르타르나 기포콘크리트에 균열이 발생할 가능성이 높아지고 있다. 이 연구에서는 완충재의 강성, 하중가력 위치, 바닥 구성층을 변수로 하는 16개의 2방향 뜬바닥구조를 실험하였다. 실험에 의하면 완충재의 강성은 뜬바닥구조의 균열강도에 큰 영향을 미치며 완충재의 할선계수가 0.2MPa인 경우에 낮은 강도에서 균열이 발생하였다. 또한 슬래브의 단부나 모서리에 하중이 가력될 경우에 균열강도가 감소하였다. 뜬바닥구조를 이루고 있는 마감모르타르는 균열강도에 영향을 주었지만 기포콘크리트는 균열강도에 영향을 주지 않았다.

• 한국도로학회논문집
• /
• 제9권1호
• /
• pp.47-56
• /
• 2007

교통하중하의 포장구조에 대한 설계나 비선형 해석에 있어 도로하부 재료의 회복변형 특성이 활용되고 있다. 그러나 국내에서의 관련 연구가 매우 미진한 실정이다. 또한 매우 제한적인 범위의 자료만이 노상토의 회복탄성계수를 추정하는데 활용되고 있다. 이에 본 논문에서는 시험도로 입상 노상토를 대상으로 비선형 특성을 알아보기 위하여 반복재하 회복탄성계수 시험을 수행하였다. 현장조건을 반영하여 함수비와 응력조건을 고려한 회복탄성계수 구성방정식을 제안하였다. 이를 통하여 응력조건을 고려한 회복탄성계수 예측모델과 적합한 응력의존 모델을 결정하고 계절적인 함수비 변화가 고려된 회복탄성계수 모델을 각각 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.799-810
• /
• 2001

필자는 소음진동공학회가 품질기술원으로부터 ISO/TC108 기계진동 및 충격(Mechanical Vibration and Shock) 간사기관업무를 위탁 받은 후부터 SC6 진동 및 충격 발생시스템(Vibration and Shock Generating Systems)에 대한 한국측 위원으로 일을 해왔다. (중략)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1042-1049
• /
• 2007

Recently, a theoretically-sound design approach, using an elastic multilayer model, is attempted in trackbed designs for the construction of high speed railways and new lines of conventional railways. In the elastic multilayer model, the stress-dependent resilient modulus($E_R$) is an important input parameter, that is, reflects substructure performance under repeated traffic loading. However, the evaluation method for resilient modulus using repeated loading triaxial test is not fully developed for practical purpose, because of costly equipment and the significantly fluctuated values depending on the testing equipment and laboratory personnel. In this study, the paper will present an indirect method to estimate the resilient modulus using dynamic properties. The resilient modulus of crushed stone, which is the typical material of sub-ballast, was calculated with the measured dynamic properties and the range of stress level of the sub-ballast, and approximated with the power model combined with bulk and deviatoric stresses. The resilient modulus of coarse grained material decreases with increasing deviatoric stress at a confining pressure, and increases with increasing bulk stress. Sandy soil(SM classified from Unified Soil Classification System) of subgrade was also evaluated and best fitted with the power model of deviatoric stress only.