• Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2007

Most of the herb residue producing from oriental medical clinics(OMC) and hospitals(OMH) is wasted in Korea. To develop of adsorbent for removing heavy metal from wastewater, the various pre-treatment methods of the herb residue were evaluated by potentiometric titration, Freundlich isotherm adsorption test and the kinetic adsorption test. The herb residue was pre-treated for increasing the adsorption capacity by cleaning with distilled water, 0.1 N HCl and 0.1 N NaOH and by heating at $370^{\circ}C$ for 30 min. It showed a typical weak acid-weak base titration curve and a short pH break like commercial activated carbon during photentiometric titration of pre-treated herb residue. The log-log plots in the Freundlich isotherm test were linear on the herb residue pre-treated with NaOH or HCl like commercial activated carbon. The adsorption capacity(qe) in the Freundlich isotherm test for $Cr^{6+}$ was 1.5 times higher in the pre-treated herb residue with HCl than in activated carbon. On the other hand the herb residue pre-treated with NaOH showed the good adsorption capacities for $Pb^{2+}$, $Cu^{2+}$ and $Cd^{2+}$ even though those adsorption capacities were lower than that of activated carbon. In kinetic test, most of heavy metals removed within the first 10 min of contact and then approached to equilibrium with increasing contact time. The removal rate of heavy metals increased with an increase of the amount of adsorbent. Likewise, the removal rates of heavy metals were higher in the herb residue pre-treated with NaOH than in that pre-treated with HCl. The adsorption preference of herb residues pre-treated with NaOH or HCl was $Pb^{2+}>Cu^{2+}$ or $Cd^{2+}>Cr^{6+}$ in the order. Conclusively, the herb residue can be used as an alternative adsorbent for the removal of heavy metals depending on pr-treatment methods.

• Journal of Ginseng Research
• /
• v.18 no.2
• /
• pp.118-121
• /
• 1994

Alcohol and acetaldehyde concentrations were measured in the blood and brain of rats which were treated with 20% alcohol (control group) or co-administered 20% alcohol with ginseng extract residue roasted (test group). There was no change in blood alcohol concentration between control and test group. However, the brain alcohol concentration was lowered in the test group which was treated for seven days. The concentration of aldehyde in the brain and blood was lowered in the test group. The activities of monoamine oxidase b in various regions of brain were recovered to normal group in the test groups. However, the Quantities of naloxone binding receptors were not changed by ginseng extract residue roasted.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.102-106
• /
• 2010

This paper studied the measurement about the gunpowder residue quantity by using a handgun and we carried out an experiment ignition characteristics of the gunpowder residue for the investigation fire cause into the indoor shooting range in Busan. The measurement of the gunpowder residue quantity is spouted by using a 0.38 inch gun and 9 mm gun. We were carried out evaluation experiments such as impact sensitivity test, static electricity sensitivity test, friction sensitivity test and measuring a flash point for the ignition characteristics about the gunpowder residue. From experiment results, the impact sensitivity and friction sensitivity of the gunpowder residue in comparison with ball powder are highly sensitive and the gunpowder residue ignites at a relatively low temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.42-45
• /
• 1996

A residue from the newsprint waste was investigated as a filler in adhesive for bonding southern pine plywood. The residue was prepared by drying the wet residue to 8% moisture content and grinding the dry material using a laboratory Wiley mitt with a 75-${\mu}m$(200-mesh) screen. The residue was compared to a commercial filler commonly used in structural plywood adhesives. A total of 48 three-ply panels. 12.7mm nominal thickness and 0.3 by 0.3 m in size, were fabricated at two press times(4 and 5 min) and three assembly times(20, 40 and 60 min). Evaluations of the residue were carried out by performance tension shear tests after two 4-hour boil accelerated aging tests on plywood. The test results included tension shear strength and estimated wood failure values. All plywood made with the residue filler were comparable to the control-bonded plywood. These results indicate that residue from the newsprint waste streams would be suitable as filler for plywood adhesives.

• Journal of Environmental Health Sciences
• /
• v.2 no.1
• /
• pp.11-15
• /
• 1975

The study Was carried out to determine the residue concentrations of peniccillin in Merket milk samples collected from some of the retail shops located in Seoul City. During the period from June to September 1974, 160 milk samples were collected and examined, using the Filter Paper Disk Method, for Screening test and Quantitative test of penicillin residue. The results obtained in the study were as follows: 1. Among the 160 Market Milk samples. 28 samples (17.5%) proved to contain some antibiotics residue. 2. In the case of the antibiotics residue positive milk samples, the rate of penicillin residue alone was 46.4% and the rate of the other antibiotics was 53.6%. 3. In the distribution of milk plants examined in relation-to the antibiotics residue positive milk samples, it was shown that S.K.H. and M.Market Milk plants had 15.0, 17.5, 20.0 and 17.5 percent respectively. 4. According to the monthly distribution, the highest antibiotics residue positive rate (25.0% of the samples) was shown in the samples collected in August, and the next (20.0% of the samples) in July. While the samples collected in June and September 1974 Showed lower rates of 7.5% and 17.5% respectively. 5. The range of the residue concentraction of penicillin in the positive milk samples were as follows: a. 53.8% of the total samples were found in the lowest range of 0.02-0.05 IU/ml. b. 30.8% of the total samples were found in the lower range of 0.05-0.1 IU/ml. c. 7.7% of the total samlpes were found in the higher range of 0.1-0.2 IU/ml. d. 7.7% of the total samples were found in the highest range of over 0.2 IU/ml.

• Journal of the Korean Society of Food Culture
• /
• v.33 no.3
• /
• pp.217-228
• /
• 2018

This study aimed to develop unique, local "food tourism" products by finding specialized items that combine tourist attractions, such as folklore or hot springs. Traditional ingredients were analyzed with ancient texts for the methods of research. A brand image was made possible utilizing hot spring lore and other regional stories. The tofu products were produced using local specialty beans. Products, such as tofu residue cake and willow bean tea, were made with the tofu residue. After the products were completed, the sensory test began at the local tourist attraction. Asan City's food tourism product willow tofu was made with beans that were given as compensation for building the Onyang temporary palace according to the Annals of the Joseon Dynasty and the willow tree that appears in Sunshin Lee's anecdotes. After the preference test between normal tofu and willow-extract tofu was conducted to measure the product potential of willow tofu, among the sample extracts, 0.04% of the willow extract showed a significant preference. The hot spring tofu-residue cake was baked using tofu residue and vegetable olive oil to substitute for animal oil, such as butter, or margarine. After the sensory test targeting the adults was conducted, both products displayed significant product potential with average scores above 5.0. Willow tree bark, which has antioxidation and anti-inflammatory effects without a bitter taste or strong smell, was proven to bean appropriate ingredient for leached tea. The nutty flavor of leached tea was enhanced by roasted green kernel black beans and willow tree bark. The sensory test showed that the leached tea and tofu received a high preference rating on both color and flavor.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.502-508
• /
• 2011

The goal of the present work was to investigate the development of a geopolymeric ceramic material from a mixture of mine residue, coal fly ash, blast furnace slag, and alkali activator solution by the geopolymer technique. The results showed that the higher compressive strength of geopolymeric ceramic material increased with an increase in active filler (blast furnace slag + coal fly ash) contents and with a reduction of mine residue contents. The geopolymeric ceramic had very high early age strength. The compressive strength of the geopolymeric ceramic depended on the added active filler content. The maximum compressive strength of the geopolymeric ceramic containing 20 wt.% mine residue was 141.2 MPa. The compressive strength of geopolymeric ceramic manufactured by adding mine residue was higher than that of portland cement mortar, which is 60 MPa, when cured for 28 days. SEM observation showed the possibility of having amorphous aluminosilicate gel within geopolymeric ceramic. XRD patterns indicate that the geopolymeric ceramic was composed of amorphous aluminosilicate, calcite, quartz, and muscovite. The Korea Standard Leaching Test (KSLT) was used to determine the leaching potential of the geopolymeric ceramic. The amounts of heavy metals were noticeably reduced after the solidification of mine residue with active filler.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.21-27
• /
• 2017

A soldering temperature of ($235{\pm}3$) $^{\circ}C$ is described in ISO 9455-15 for the copper corrosion test. However, this temperature is not suitable for performing lead-free solder pastes. We evaluated the compatibility of a lead-free solder paste in the experimental conditions of (Liquidus temperature + ($35{\pm}3$)) $^{\circ}C$. Based on the results after a Cu corrosion test, a proper temperature for Pb-free soldering was (melting point+($35{\pm}3$)) $^{\circ}C$. Criteria used to evaluate corrosion due to discoloration of flux residue is described in ISO 9455-15, but a more quantitative evaluation standard is needed. In this study, experimental error level was estimated by analyzing flux residue after a corrosion test for 72, 500 hours of specimens using EDS analysis with acceleration voltage. It was determined that the copper area at the flux residue boundary is suitable for the EDS analysis area.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.207-214
• /
• 2004

Extra heavy vacuum residue oil has advantage as the fuel of a power plant in reducing the cost of power generation. Numerical study is conducted by the KIVA code to understand combustion, heat transfer and flow field characteristics in the test reactor. The combustion model of pulverized coal particles is adopted as the combustion process of extra heavy oil is similar to that of coal. As an initial phase of investigation parametric study is performed with respect to SMD and spray angle of injected spray droplets.

• Journal of ILASS-Korea
• /
• v.12 no.2
• /
• pp.94-100
• /
• 2007

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type (the second generation technology) fuel supply system. To investigate the characteristics of LPG residue in liquid phase LPG injection system, various rubbers in LPG fuel system were reacted with LPG fuels during 3 months. The experimental results showed that the residue of a cover rubber in a fuel pump after test increased 10 times higher than that before test. Furthermore, the amount of sulfur, nitrogen species which are considered as main sources in deposit formation in the LPLi fuel injector were also found to be higher than that in original LPG fuel. And rubber properties of fuel pump cover were decreased after reaction test compared with those of the original rubber. Therefore, the rubber for fuel pump cover is not suitable for a proper material in LPLi fuel system. And these results can provide more information if a motor company shares the data of core rubber parts in field test LPLi vehicles.