• Journal of Korean Society of Forest Science
• /
• v.49 no.1
• /
• pp.1-5
• /
• 1980

In this study, enzymatic saccharification of substrates from Alnus hirsuta Ruper (8-14 years). Quercus acutissima Carruthers, Betula platyphylla var. japonica Nera, Populus euramericana Guiner and Platanus orientalis L. were investigated using crude cellulase preparations of Trichoderma viride Pers. ex. Fr. SANK 16374, and conduced on the optimum treated conditions of the cellulase sacchrification and reactivation of residue of digested substrates. The Trichoderma viride cellulase was produced by the submerged culture process and produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate. The method of dilignification from wood (5 species) was treated by the peracetic acid(PA) method. The reducing sugar was determined by the dinitrosalicylic acid (DNS) method. 1. The results of tests carried out for 96 hr. (Figure 1), show conclusively the initial substrates from 5 species ($S_3$) which has been rendered highly reactive form and the mean rate of reducing sugar was 28.3 %. 2. The results of tests carried out for 96 hr., the reactivation of residue of digested substrates (improvement in the quality of the substrate through preheating in air at $190^{\circ}C$. for 45 min. followed by milling was (60 mesh size) at the same substrate level, increased concentrations of cellulase at the same substrate level, and increased concentrations of cellulase increases the rate of hydrolysis considerably. 3. Figure 1. shows conclusively that the residue of digested substrates ($S_1$ dried at $60^{\circ}C$) which has been rendered extremly resistant to cellulase action can be reactivated into a highly reactive form ($S_2$), almost comparable to that of the initial substrates ($S_3$). And the reducing sugar formation did not show statistically significent differences at 5% levels by initial substrates and the residue of digested substrates (preheating in air at $190^{\circ}C$. for 45 min. fallowed by milling was (60 mesh size).

• Korean Journal of Environmental Agriculture
• /
• v.22 no.3
• /
• pp.210-214
• /
• 2003

Pesticide residues in some vegetables collected at Noeun wholesale market in Daejeon were surveyed and assessed their risk. In 100 samples, the detection rate of pesticide was 46.0% and the rate exceed MRL was 6.0%. Commodities showing high detection rate were lettuce(85.0%), perilla leaf(80.0%) and cucumber(60.0%). Dicarboximide, organochlorine, and azole fungicides and organophosphorus and pyrethroid insecticides were detected. Detection frequency of pesticide was in the order of procymidone, chlorpyrifos, chlorothalonil, cypermethrin and EPN. When the estimated intake amount of the pesticides were compared with ADI to assess their risk, bitertanol, triflumizole and iprobenphos in perilla leaf were higher rate than the other vegetables. However the total amounts of intake of pesticides were estimated to less than 0.46% of ADI.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.361-370
• /
• 2010

This study was carried out to establish the analytical method of MCPA residue in brown rice and rice straw by HPLC/UVD. When MCPA was extracted from sample under the pH 3.6 by adding acetone 200 mL and 1N-HCl 100 mL, the extraction efficiency was high by 87%. And purification efficiency was high by 83% when 5 mL of 1% methanol/acetonitrile was eluated by the florisil Sep-pak cartridge column. From spiking of $0.1{\mu}g\;mL^{-1}$ and $0.25{\mu}g\;mL^{-1}$ of MCPA to control sample, respectively, average recovery rate of MCPA in brown rice was 96.0% and 94.9% and that in rice straw was 92.5% and 88.2%, respectively. Precision of experiment was very high by relative standard deviation of 1.5% to 5.7%. In brown rice and rice straw treated with bentazone+MCPA (11+1.2%) of 30 kg and 60 kg per ha at 30 days after rice transplanting, respectively, maximum residue limit was under $0.05{\mu}g\;mL^{-1}$ of the recommended rate of Korean Food and Drug Administration. From the above results, the analytical procedure of MCPA in plants such as hydrolysis, saponification and derivatization were ommited, and retention time was faster and recovery rate was higher than the existed results of HPLC/UVD. Therefore, these results were greatly improved and seemed to be usefully applied for residue analysis of MCPA in plants.

• The Korean Journal of Community Living Science
• /
• v.24 no.2
• /
• pp.187-194
• /
• 2013

The purpose of this study was to define the optimal boxthorn berries washing method for developing the boxthorn berries cleaner. We analyzed the rate of removal of residual pesticides according to washing methods; 1st - habitual washing method, 2nd - drum rotation washing method, 3th - drum rotation and air bubble washing method, 4th - drum rotation and nozzle spray washing method, 5th - drum rotation and air bubble and nozzle spray washing method. A rate of removal of residual pesticides of 88% was detected in the drum rotation and air bubble and nozzle spray washing method, and a rate of 82% was detected in the habitual washing method. The drum rotation and air bubble and nozzle spray washing method appeared to be the best good washing effect compared to the habitual washing method(about 6% compared to 82.0% higher). Clothianidin Triadimefon, Triforine ingredients, the drum rotation and air bubble and nozzle spray washing method efficiency was lower compared to the habitual washing method removal efficiency.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.48-53
• /
• 2001

In speaker verification based on LPC analysis the prediction residues are ignored and LPCC(LPC cepstrum) are only used to compose feature vectors. In this study, LPCC and RCEP (residual cepstrum) extracted from residues are used as feature parameters in the various environmental speaker verification. We propose the weighting function which can enlarge inter-speaker variation by weighting pitch, speaker inherent vector, included in residual cepstrum. Simulation results show that the average speaker verification rate is improved in the rate of 6％ with RCEP and LPCC at the same time and is improved in the rate of 2.45% with the proposed weighted RCEP and LPCC at the same time compared with no weighting.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.721-729
• /
• 2015

Surface heat balance of the Gangjeong-Goryung Reservoir is analyzed for 12-17 August 2013. Each flux elements at the water surface is derived from the special field observations with application of an aerodynamical bulk method for the turbulent heat fluxes and empirical formulae for the radiation heat fluxes. The rate of heat storage in the reservoir is estimated by using estimated by surface heating rate and the vertical water temperature data. The flux divergence of heat transport is estimated as a residual. The features of the surface heat balance are almost decided by the latent heat flux and the solar radiation flux. On average for 12-17 August 2014 in the Gangjeong- Goryung Reservoir, if one defines the insolation at the water surface as 100 %, 94 % is absorbed in the reservoir; thereafter the reservoir loses about 30~50% by sensible heat, latent heat and net long-wave radiation. The residue of 50~80 % raises the water temperature in the reservoir or transported away by the river flow during the daytime.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.568-574
• /
• 2000

We have been optimized tungsten(W) plug CMP(chemical mechanical polishing) characteristics using two different kinds of component of slurry and two different kinds of pad which have different hardness. The comparison of oxide film roughness on around W plug after polishing has been carried out. And W plug recess for consumable sets and dishing effect at dense area according to the rate of over-polishing has been investigated. Also the analysis of residue on surface after cleaning have been performed. As a experimental result we have concluded that the consumable set of slurry A and hard pad was good for W plug CMP process. After decreasing the rate of chemical reaction of silica slurry and adding two step buffering we could reduce the expanding of W plug void however we are still recognizing to need a more development for those kinds of CMP consumables.

• Journal of Biomedical Engineering Research
• /
• v.44 no.1
• /
• pp.92-98
• /
• 2023

Purpose: To propose a new infusion rate monitoring technique based on the 2D image marker tacking to improve patient safety by preventing syringe pump-related medication accidents due to decreased infusion rate control accuracy. Materials and Methods: The infusion rate of the syringe pump and drug residue in the pump-equipped syringe were monitored in real time by tracking the movement of the 2D image markers attached to the syringe pump. Results: The error rate between the set and the estimated infusion rates was 1.03, 0.66, 1.95, 0.23, and 1.05% when the infusion rate setting was 10, 20, 30, 40, and 50 mL/H, respectively. In addition, the error rate between the actual and the estimated drug residues was 1.04, 0.47, 0.60, 3.66, and 0.00% when the infusion rate setting was 10, 20, 30, 40, and 50 mL/H, respectively. Conclusion: Experimental results demonstrated that the proposed technique can increase the efficiency of the safety management system for seriously ill inpatients by decreasing a possibility of syringe pump-related medication accidents in hospitals.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.40-46
• /
• 2014

Through the study of the basic characteristics of cow manure and the characteristics of carbonization residue, carbonization degree, conversion rate, kinetic reactions, and activation energy for cow manure were examined. Since the heating value of cow manure was very low, it was converted to carbonization residue as a fuel with heating value of 4,300 kcal/kg by carbonization processes. Conversion rate was increased rapidly up to 10 minutes of the initial reaction stage and was increased with increasing temperature. The carbonization of cow manure could be described by the 1st order reaction. Frequency factor(A) of reaction rate for cow manure was evaluated to be $1.34{\times}10^{-2}min^{-1}$, the activation energy was estimated to be 5,196.4 cal/mol. As carbonization temperature increased from $250^{\circ}C$ to $400^{\circ}C$, the kinetic reaction was increased from $0.2107min^{-1}$ to $0.0679min^{-1}$. From the result of the carbonization for cow manure, it can be determined that the optimal conditions of the carbonization process were 20 minutes in carbonization time and $350^{\circ}C$ for carbonization temperature.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.763-771
• /
• 2000

The 88 kinds of pesticide residues were analyzed in 12 kinds(289 samples) of fruits and vegetables brought at department store & mart in Kwangju from Feburary to September in 1999. The detection rate of pesticide residue in 12 kinds(289 samples) of fruits and vegetables was 21.1%, and the rate exceeds standard was 5.2%. The order of highly exceed rate in fruits and vegetables were perilla leaf, lettuce, spinach and chickery. The order of pesticide which founded frequently in fruits and vegetables were procymidone, endosulfan, vinclozoline, chlorpyrifos, cyprermethrin, pirimiphos-M, fenvalerate, fenarimol, and monocrotophos. And that of pesticide which exceed highly standard were procymidone, vinclozolin, endosulfan, pirimiphos-M, fenarimol, monocrotophos, etc. Eight different washing methods were compared for removal efficiencies of residual pesticides(procymidone, vinclozoline) on the perilla leap, the lettuce, the spinach, the strawberry, and the minitomato. Residual pesticides such as procymidone and vinclozoline were removed most efficiently by ultrasonic washing.