• Food Science of Animal Resources
• /
• v.42 no.4
• /
• pp.712-722
• /
• 2022

In this study, we investigated the residual properties of tebuconazole-treated pigs. Twenty pigs were treated with different concentrations (0.25, 1.25, 2.5, 12.5, and 25 mg/kg bw/d) of tebuconazole for 28 d. Blood biochemistry, histology, and residual levels were analyzed using the VetTest analyzer, Masson's trichrome staining kit, and liquid chromatography-mass spectrometry, respectively. The final body weights were not significantly different between the control and treatment groups. Alkaline phosphatase, blood urea nitrogen, cholesterol, and gamma-glutamyl transpeptidase levels were significantly different from those of the control after exposure for 14 d. However, alanine aminotransferase levels showed changes only after exposure to pesticides for 28 d. The biochemical parameters were separated during the experimental period (14 d versus 28 d) by principal component analysis. Based on variable importance plots, blood urea nitrogen/creatinine ratio, blood urea nitrogen, glucose, and gamma-glutamyl transpeptidase are candidate biomarkers for tebuconazole exposure. The residual levels were observed at T4 (12.5 mg/kg bw/d) and T5 (25 mg/kg bw/d) in the liver and fat tissues, respectively. Fibrosis increased in the liver, kidney, and fat tissues, depending on the tebuconazole concentration. In conclusion, the residue limits of tebuconazole and the physiological changes caused by dietary tebuconazole in pigs provide important information for establishing maximum residue limits of pork and pork products.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.4
• /
• pp.397-402
• /
• 2009

In Korea, salt stress is one of the major problems limiting crop production and eco-environmental quality in greenhouse soil. The objective of this study was to evaluate the effectiveness of organic residues (Chinese milk vetch, maize stalk, rice straw, and rye straw) for reducing salt activity in greenhouse soil. Organic residues was incorporated with salt-accumulated soil (EC, 3.0 dS $m^{-1}$) at the rate of 5% (wt $wt^{-1}$) and the changes of electrical conductivity (EC) was determined weekly for 8 weeks under incubation condition at $30^{\circ}C$. The EC, microbial biomass carbon (MBC), and water soluble ions in soil was strongly affected by C/N ratio of organic residues. After 8 weeks incubation, the concentration of water soluble $NO_3{^-},\;Ca^{2+}$, and $Mg^{2+}$ was significantly decreased in organic residues having high C/N ratio (maize stalk, rice straw, and rye straw) incorporated soil compared to organic residues having lower C/N ratio (Chinese milk vetch) incorporated soil. The EC value in Chinese milk vetch incorporated soil was higher than control treatment. In contrast, maize stalk, rice straw, and rye straw amended soil was highly decreased the EC value compared to control and Chinese milk vetch applied soil after 4 weeks incubation. Our results indicated that incorporation of organic residues having high C/N ratio (>30) could reduce salt activity resulting from reducing concentration of water soluble ions.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2000

This study was investigated to the reaction of alumina sintering with alkaline. The soluble $NaAlO_2$ was made after the commercial ${\alpha}-Al_2O_3$ was calcinated with NaOH. The reaction of alumina was carried out to be based on the effects of calcination temperature, time, and the mixing ratio of ${\alpha}-Al_2O_3/NaOH$. The alumina was calcined over $500^{\circ}C$ with NaOH powder after it was sieved with 170/270 mesh. The calcined alumina with NaOH powder was dissolved into $25^{\circ}C$ distilled water and filtrated, and HCI was added to adapt pH 6.5~7.5. The residue was separated with vacuum pump for filtration after it was adapted to proper pH, and aluminum compound was precipitated with $Al(OH)_3$. The investigation was carried out with the variables; the calcination temperature($500-900^{\circ}C$), the calcination time (30~90 min), and the concentration of HCI when leaching(0.5~3.0N) respectively. In this investigation, the main product of ${\alpha}-Al_2O_3$ and NaOH was $NaAlO_2$ and the maximum conversion ratio was 91.4% under the optimum conditions as followed ; the ratio of NaOH/${\alpha}-Al_2O_3$ was 1.5 and the calcination conditions were $800^{\circ}C$ and 90 min.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.84-90
• /
• 2002

In 1995 we licensed pyrolysis gas melting technology of indirect heating type (using kiln) from Siemens AG, and built its demonstration facility in 1998 at Clean-Park-East of Fukuoka City to demonstrate the technology for municipal solid waste (MSW). In 1997 we were awarded an order from Kanemura Co., Ltd. to build a pyrolysis gas melting and power generation plant, specifically for treating residue from car shredder. The latter was launched in 1998, and is currently in commercial operation. The operation of these plants have proven the following facts. (1) The system is capable for performing a stable operation with a wide variety of waste. (2) Pyrolysis is achieved steadily regardless of the variation in the quality of waste. (3) The system can be operated under low excess air ratio (1.2∼1.3). (4) The concentration of dioxins at the furnace outlet is 0.062ng-TEQ/㎥$\_$N/, and 0.002ng-TEQ/㎥$\_$N/, at the stack. (the value is corrected to dryO$_2$ 12％) (5) The purity of recovered metals exceeds 90%.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.470-478
• /
• 2020

Spent coffee grounds (SCG), the residue after brewing coffee beverage, is a promising biodiesel feedstock due to its high oil contents (15-20%). However, SCG should be pretreated to reduce the high free fatty acid content, which hampers transesterification reaction. To overcome this, we explored a direct transesterification reaction of SCG using ultrasound irradiation and identified the optimal sonication parameters. A high fatty acid methyl ester (FAME) content, up to 97.2%, could be achieved with ultrasound amplitude of 99.2 ㎛, irradiation time of 10 min, and methanol to oil ratio of 7:1 in the presence of potassium hydroxide concentration of 1.25 wt.%. In addition, we demonstrated that ultrasound irradiation is an efficient method to produce biodiesel from untreated SCG in a short time with less energy than the conventional mechanical stirring method. The physical and chemical properties of the SCG biodiesel met the requirements for an alternative fuel to the current commercial biodiesel.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.4
• /
• pp.736-740
• /
• 2004

Preparation of ginseng concentrate with high content of acidic polysaccharide from white tail ginseng marc that was obtained after preparation of white tail ginseng extract. As a result of extraction of white tail ginseng under various concentrations of ethanol (0∼90%), both amount of acidic polysaccharide and extraction yield decreased by increasing the ethanol concentration. However, acidic polysaccharide extracted by water from white tail ginseng marc was increased in accordance with the increase of ethanol concentration. The optimal condition for the extraction of acidic polysaccharide from the marc was treatment of $\alpha$-amylase in 390∼650 unit/g residue/15 mL of distilled water for 5 min at 4$0^{\circ}C$. The amount of acidic polysaccharide in water extract of the marc was increased from 8.3% to 10.5% by the treatment of $\alpha$-amylase. A new ginseng extract mixture was manufactured by mixing 50% ethanol extract of white tail ginseng and water extract of alcoholic residue in the ratio of 8:2 (w/w). Crude saponin content and acidic polysaccharide content were 10.5% and 17%, respectively. The mixture had a same crude saponin content and twice acidic polysaccharide content comparing to 50% ethanol extract of white tail ginseng. It suggests that preparation of new ginseng concentrate with high content of acidic polysaccharide from white tail ginseng marc has high potencies in the utilization of waste material.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.3
• /
• pp.385-392
• /
• 2000

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous HCI solution and deproteination in dilute aqueous NaOH solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chitin were measured in varieties of dye concentration and dipping periods. Four kinds of dyestuffs were used, C.I.Acid Blue 29. C.I.Direct Blue 6, C.I.Reactive Orange 12 and C.I.Basic Red 18. When chtin 1g was dipped in 0.05% of dyebath with stirring, maximum adsorption ratio of each kind of dyes was exhibited as 91.6% for C.I.Acid Blue 29, 95% for C.I.Direct Blue 6, 58.2% for C.I.Reactive Orange 13 and 75.8% for C.I.Basic Red 19. It shows that chitin has better adsorption abilities of ionic dyes of acid, direct and basic dye than non-ionic reactive dye. And chitin has better adsorption abilities of anionic acid direct dyes than cationic basic dye because of the presence of nitrogen atoms. All kinds of dyestuffs used showed speedy absorption effects by chitin, so chitin can absorb much amount of dyes in 5 mimutes reach to equilibrium of adsorption in 2 hours after dipping. Basic dye was absorbed the most speedily in 5 minutes, although maximum adsorption ratio is not high. That reason can be thought that chitin surface is essentially negatively charged due to polar funtional groups.

• Archives of Pharmacal Research
• /
• v.27 no.12
• /
• pp.1275-1283
• /
• 2004

Fate of the nascent thyrolglobulin (Tg) molecule is characterized by multimerization. To establish the formation of Tg multimers, the partially unfolded/reduced Tg or deoxycholate-treated/ reduced Tg was subjected to protein disulfide isomerase (PDI)-mediated multimerization. Oxidized glutathione/PDI-mediated formation of multimeric Tg forms, requiring at least an equivalent molar ratio of PDI/Tg monomer, decreased with increasing concentration of reduced glutathione (GSH), suggesting the oxidizing role of PDI. Additional support was obtained when PDI alone, at a PDI/Tg molar ratio of 0.3, expressed a rapid multimerization. Independently, the exposure of partially unfolded Tg to GSH resulted in Tg multimerization, enhanced by PDI, according to thiol-disulfide exchange. Though to a lower extent, a similar result was observed with the dimerization of deoxycholate-pretreated Tg monomer. Consequently, it is implied that intermolecular disulfide linkage may be facilitated at a limited region of unfolded Tg. In an attempt to examine the multimerization site, the cysteine residue-rich fragments of the Tg were subjected to GSH-induced multimerization; a 50 kDa fragment, containing three vicinal dithiols, was multimerized, while an N-terminal domain was not. Present results suggest that the oxidase as well as isomerase function of PDI may be involved in the multimerization of partially unfolded Tg or deoxycholate-treated Tg.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.29-37
• /
• 2018

In this study, optimum extraction conditions for phosphorus recovery from sewage sludge ash(SSA) were investigated. For this purpose, an experiment was conducted to determine optimal recovery conditions for Ca-P type phosphorus by using calcium component in the recycled aggregate residue. The phosphorus content of sewage sludge ash was confirmed to be 5.0 %. When $H_2SO_4$ was used as an extract, concentration of 1 N $H_2SO_4$, L/S ratio of 10, and extraction time of 30 min were found to be the optimal extraction conditions. Phosphorus was extracted by using optimal extraction conditions, and then the heavy metals eluted with phosphorus were removed using 1~20 g of cation exchange resin. In 20 g of cation exchange resin, Fe 71.3%, Cu 82.4%, Zn 79.9%, and Cr 15% were removed. After that, the mixing ratio of the calcium extract obtained from the recycled aggregate residue (RAR) was changed to 1:1, 1:5, 1:10. The pH of the SSA to RAR mixture was adjusted to 2, 4, 8 and 12 by the addition of 5 N NaOH to the mixture of 1:5, and the phosphorus was recovered as Ca-P type precipitate. The optimum pH was 8. When recycled aggregate residues were used, the weight of calcium phosphate increased, but the amount of wastewater generated also increased. Therefore, it was concluded that the use of recycled aggregate residue was not economically feasible.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.1-14
• /
• 2019

This study used microwave-nitric acid leaching with the aim of removing penalty elements such as As and Bi. Moreover, enhanced gold content from the gold concentrate sample. The leaching conditions were changed: leaching time, nitric acid concentrations and solid-liquid ratio; In order to improve the removal of penalty elements. As a result of the experiment; sample weight loss rate, As and Bi removal rate and gold content in the solid-residues have been increased when the nitric acid concentration and leaching time were increased while the solid-liquid ratio was decreased. The leaching conditions for the maximum As and Bi removal and gold content were: leaching with a 6.0 M nitric acid solution doing 5 min. At these, the solid-residue sample weight loss was 87 %. As removal rate was 98.23 % and Bi was completely removed (100 %). Furthermore, gold content increased from 81.36 g/t to 487.32 g/t. The XRD of the solid residue showed that pyrite disappeared as the nitric acid concentration was increased, whereas sulfur peaks was increased, too.