• Animal Bioscience
• /
• v.35 no.5
• /
• pp.648-658
• /
• 2022

Objective: The identification of nonlinear mixed models that describe the growth trajectory of New Zealand rabbits was performed based on weight records and carcass measures obtained using ultrasonography. Methods: Phenotypic records of body weight (BW) and loin eye area (LEA) were collected from 66 animals raised in a didactic-productive module of cuniculture located in the southern Piaui state, Brazil. The following nonlinear models were tested considering fixed parameters: Brody, Gompertz, Logistic, Richards, Meloun 1, modified Michaelis-Menten, Santana, and von Bertalanffy. The coefficient of determination (R²), mean squared error, percentage of convergence of each model (%C), mean absolute deviation of residuals, Akaike information criterion (AIC), and Bayesian information criterion (BIC) were used to determine the best model. The model that best described the growth trajectory for each trait was also used under the context of mixed models, considering two parameters that admit biological interpretation (A and k) with random effects. Results: The von Bertalanffy model was the best fitting model for BW according to the highest value of R² (0.98) and lowest values of AIC (6,675.30) and BIC (6,691.90). For LEA, the Logistic model was the most appropriate due to the results of R² (0.52), AIC (783.90), and BIC (798.40) obtained using this model. The absolute growth rates estimated using the von Bertalanffy and Logistic models for BW and LEA were 21.51g/d and 3.16 cm², respectively. The relative growth rates at the inflection point were 0.028 for BW (von Bertalanffy) and 0.014 for LEA (Logistic). Conclusion: The von Bertalanffy and Logistic models with random effect at the asymptotic weight are recommended for analysis of ponderal and carcass growth trajectories in New Zealand rabbits. The inclusion of random effects in the asymptotic weight and maturity rate improves the quality of fit in comparison to fixed models.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.630-643
• /
• 2022

This study was conducted to derive the fresh weight and dry weight estimation formulas of Pinus densiflora and prepare a weight table using them. Aone-variable formula using only the diameter at breast height (DBH) and a two-variable formula using DBH and height were used to calculate the fresh and dry weight. Each equation was verified using statistics, such as fit index, standard error, and residuals. Theoptimal equation was evaluated for applicability by calculating the weight as a coefficient derived from a statistical verification. W = bD+cD² was selected for the one-variable equation, while W = aD^bH^c was selected for the two-variable equation. The fit index of the former was 0.87-0.92, while that of the latter was 0.94-0.98, both of which showed a good fit. A new weight table was prepared using the optimal estimation formula, and it was compared and analyzed with a previous weight table. Analysis results showed that Gangwon pine had higher values in the previous weight table, while pines in the central region had higher values in the newly created weight table.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.315-324
• /
• 2022

The conventional LESS (LEast-Squares Solution) is calculated under the assumption that there is no errors in independent variables. However, the coordinates of a point, either from traditional ground surveying such as slant distances, horizontal and/or vertical angles, or GNSS (Global Navigation Satellite System) positioning, cannot be determined independently (and the components are correlated each other). Therefore, the TLS (Total Least Squares) adjustment should be applied for all applications related to the coordinates. Many approaches were suggested in order to solve this problem, resulting in equivalent solutions except some restrictions. In this study, we calculated the normal vector of the 3D plane determined by the trace of the VLBI targets based on TLS within GHM (Gauss-Helmert Model). Another numerical test was conducted for the estimation of the Helmert transformation parameters. Since the errors in the horizontal components are very small compared to the radius of the circle, the final estimates are almost identical. However, the estimated variance components are significantly reduced as well as show a different characteristic depending on the target location. The Helmert transformation parameters are estimated more precisely compared to the conventional LESS case. Furthermore, the residuals can be predicted on both reference frames with much smaller magnitude (in absolute sense).

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.103-112
• /
• 2009

In a nuclear power plant (NPP), periodic sensor calibrations are required to assure sensors are operating correctly. However, only a few faulty sensors are found to be calibrated. For the safe operation of an NPP and the reduction of unnecessary calibration, on-line calibration monitoring is needed. In this paper, principal component-based Auto-Associative support vector regression (PCSVR) was proposed for the sensor signal validation of the NPP. It utilizes the attractive merits of principal component analysis (PCA) for extracting predominant feature vectors and AASVR because it easily represents complicated processes that are difficult to model with analytical and mechanistic models. With the use of real plant startup data from the Kori Nuclear Power Plant Unit 3, SVR hyperparameters were optimized by the response surface methodology (RSM). Moreover the statistical techniques are integrated with PCSVR for the failure detection. The residuals between the estimated signals and the measured signals are tested by the Shewhart Control Chart, Exponentially Weighted Moving Average (EWMA), Cumulative Sum (CUSUM) and generalized likelihood ratio test (GLRT) to detect whether the sensors are failed or not. This study shows the GLRT can be a candidate for the detection of sensor drift.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.209-216
• /
• 2023

This study aimed to use national forest inventory data to develop a forest productivity index and yield prediction model of a Tilia amurensis stand. The site index displaying the forest productivity of the Tilia amurensis stand was developed as a Schumacher model, and the site index classification curve was generated from the model results; its distribution growth in Korea ranged from 8-16. The growth model using age as an independent variable for breast height and height diameter estimation was derived from the Chapman-Richards and Weibull model. The Fitness Indices of the estimation models were 0.32 and 0.11, respectively, which were generally low values, but the estimation-equation residuals were evenly distributed around 0, so we judged that there would be no issue in applying the equation. The stand basal area and site index of the Tilia amurensis stand had the greatest effect on the stand-volume change. These two factors were used to derive the Tilia amurensis stand yield model, and the model's determination coefficient was approximately 94%. After verifying the residual normality of the equation and autocorrelation of the growth factors in the yield model, no particular problems were observed. Finally, the growth and yield models of the Tilia amurensis stand were used to produce the makeshift stand yield table. According to this table, when the Tilia amurensis stand is 70 years old, the estimated stand-volume per hectare would be approximately 208 m³ . It is expected that these study results will be helpful for decision-making of Tilia amurensis stands management, which have high value as a forest resource for honey and timber.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.397-408
• /
• 2009

In this study, a stochastic precipitation generation framework for simultaneous simulation of daily precipitation at multiple sites is presented. The precipitation occurrence at individual sites is generated using hybrid-order Markov chain model which allows higher-order dependence for dry sequences. The precipitation amounts are reproduced using Anscombe residuals and gamma distributions. Multisite spatial correlations in the precipitation occurrence and amount series are represented with spatially correlated random numbers. The proposed model is applied for a network of 17 locations in the middle of Korean peninsular. Evaluation statistics are reported by generating 50 realizations of the precipitation of length equal to the observed record. The analysis of results show that the model reproduces wet day number, wet and dry day spell, and mean and standard deviation of wet day amount fairly well. However, mean values of 50 realizations of generated precipitation series yield around 23% Root Mean Square Errors (RMSE) of the average value of observed maximum numbers of consecutive wet and dry days and 17% RMSE of the average value of observed annual maximum precipitations for return periods of 100 and 200 years. The provided model also reproduces spatial correlations in observed precipitation occurrence and amount series accurately.

• Korean Journal of School Psychology
• /
• v.9 no.2
• /
• pp.289-309
• /
• 2012

This is a longitudinal study which analyzed suppression effects of active/passive coping strategies on academic burnout, using a structural equation modeling. A total of 357 middle school students participated in this study for two waves. In order to measure the levels of students' coping strategies and academic burnout, the Ways of Coping Checklist and the Korean version of Maslach Burnout InventoryStudent Survey(MBI-SS) were used. Latent variables were constructed with standardized residuals computed from a simple linear regression in order to capture the intra-individual changes between two time points. The results of this study are like below. First, the relationship between the change of active coping strategy and the change of passive coping strategy is positively and significantly related with each other. This result indicates that students under stress use various coping strategies simultaneously. Second, significant suppression effects were revealed between the change of active coping strategy and the change of passive coping strategy. That is, when controlling passive coping strategy, the negative relationship between the change of active coping strategy and the change of academic burnout increased. On the other hand, when controlling active coping strategy, the positive relationship between the change of passive coping strategy and the change of academic burnout increased. Based on these results, the value of this study and implications for counseling were discussed.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.531-550
• /
• 2023

Purpose: The unique nature of life-and-death healthcare services sets them apart from other service industries. While many studies exist on the relationship between healthcare services and customer satisfaction, most of them focus on mildly ill patients, ignoring the differences between critically ill and non-seriously ill patients. This study discusses the actual quality of healthcare services for patients who are facing life-threatening illnesses and are on life support, as well as their right to protection and dignity. Methods: The survey conducted to 149 patients with the four major illnesses: cancer, heart disease, brain disease and rare and incurable disease, those who have experiences with senior general hospitals. Results: The basic statistics of this study are adequate to represent the four major critical illnesses, and the reliability and validity of this study's hypotheses, which were measured by multiple items, were analyzed, and the internal consistency was judged to be high. In addition, it was found that the convergent validity was good and the discriminant validity was also secured. When examining the goodness of fit of the hypotheses, the SRMR, which is the standardized root mean square of residuals that measures the difference between the covariance matrix of the data variables and the theoretical covariance matrix structure of the model, met the optimal criteria. Conclusion: The academic implications of this study are differentiated from other studies by moving away from evaluating the quality of healthcare services for mildly ill patients and focusing on the rights and dignity of patients with life-threatening illnesses in four senior general hospitals. In terms of academic implications, this study enriches the depth of related studies by demonstrating the right to protection and dignity as a factor of patient-centeredness based on physical environment quality, interaction quality, and outcome quality, which are presented as sub-factors of healthcare quality. We found that the three quality factors classified by Brady and Cronin (2001) are optimized for healthcare quality assessment and management, and that the results of patients' interaction quality assessment can be used to provide a comprehensive quality rating for hospitals. Health and human rights are inextricably linked, so assessing the degree to which rights and dignity are protected can be a superior and more comprehensive measurement tool than traditional health level measures for healthcare organizations. Practical implications: Improving the quality of the physical environment and the quality of outcomes is an important challenge for hospital managers who attract patients with life and death conditions, but given the scale and economics of time, money, and human inputs, improving the quality of interactions and defining them as performance indicators in hospital quality management is an efficient way to create maximum value in the short term.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.167-177
• /
• 2024

This study aimed to assess the efficacy of an adsorption process in removing organic matter and micropollutant residuals. After a full-scale water circulation system, the adsorption process was considered a post-treatment step. The system, treating anthropogenically impacted surface waters, comprises a hydro-cyclone, coagulation, flocculation, and dissolved air flotation unit. While the system generally maintained stable and satisfactory effluent quality standards over months, it did not meet the highest standard for organic matter (as determined by chemical oxygen demands). Adsorption experiments utilized two granular activated carbon types, GAC 830 and GCN 830, derived from coal and coconut-shell feedstocks, respectively. The assessment encompassed organic materials along with two notable micropollutants: acetaminophen (APAP) and acid orange 7 (AO7). Adsorption kinetics and isotherm experiments were conducted to determine adsorption rates and maximum adsorption amounts. The quantitative findings derived from pseudo-second-order kinetics and Langmuir isotherm models suggest the effectiveness of the adsorption process. The findings of this study propose the potential of employing the adsorption process as a post-treatment to enhance the treatment of contaminants that are not satisfactorily treated by conventional water circulation systems. This enhancement is crucial for ensuring the sustainability of urban water cycles.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.351-358
• /
• 2013

This study was conducted to estimate the correlation structure between body size traits, carcass traits, and primal cuts in Hanwoo steers. Hanwoo progeny test data (body weight and body measurements) were collected from 2008 to 2010 from a total of 882 steers at the Hanwoo Improvement Main Center (NACF). Carcass traits considered were cold carcass weight, eye muscle area, backfat thickness, and marbling scores evaluated at the time of carcass grading. Correlation analyses were performed with observed scales of the traits and with residuals considering fixed environmental effects in generalized linear models. The correlation coefficient estimated between loin weight and chest girth was high at 0.74. The shank negatively correlated with pelvic width (-0.23) and hipbone width (-0.27). In addition, rib weight and chest girth was highly correlated (0.80). The correlation between carcass weight and chest girth was 0.86 in observed scale. Residual correlation between these traits was estimated at 0.65. Correlation between carcass weight and loin was 0.87 in the observed scale. Residual correlation was estimated at 0.83. The correlation coefficient estimated between shank weight and brisket and flank weight was negative at -0.69. Chest girth had a high correlation between primal cuts weight and body measurements. Thus, we believe that these results will provide a greater understanding on the relationship of primal cuts and other phenotypes, thus enabling valid production models for Hanwoo steers.