• 한국콘텐츠학회지
• /
• 제14권3호
• /
• pp.37-42
• /
• 2016

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.302-304
• /
• 2006

• 대한화학회지
• /
• 제11권1호
• /
• pp.17-21
• /
• 1967

For utilization of Bunker-C residual oil produced at KOCO., the auther tested the properties of vacuum fraction and blown asphalt, and as the result of it, (1) Vacuum fraction had so broad range of viscosity and high flash point that could be produced all kind of lublicating oil, but had to be dewaxed for high pour point, (2) Urea dewaxing was suitable to lighter fraction but not to heavier fraction, so, for heavier fraction, solvent dewaxing was needed. (3) Blown asphalt produced from vacuum residue had uniform relation between softening point and penetration in spite of broad change of blowing condition and adding of catalyst.

• 한국자기학회지
• /
• 제10권6호
• /
• pp.291-296
• /
• 2000

분말사출성형법에 의한 니켈 함량이 46.6, 47.2 wt%인 퍼말로이 소결체의 제조 방법을 조사하였다. 퍼말로이의 자기특성은 소결체의 잔류탄소 및 산소의 함량에 영향을 받는 것으로 알려져 있다. 본 연구에서는소결체내의 탄소의 함량을 최소화할 수 있는 용매추출과 열분해 방법을 개발하였는데 , 잔류탄소는 분말사출을 위한 결합제의 열분해 조건에 영향을 받으며, 잔류산소는 제조 공정중 소결 분위기에 좌우되는 것으로 밝혀졌다. 분말사출성형으로 제조된 퍼말로이 소결체의 잔류탄소의 함량은 50 ppm. 잔류찬소의 함량은 150 ppm.이었으며 그 자기특성은 보자력 0.46 Oe, 최대투자율14,600의 값을 가졌다.

• Korea-Australia Rheology Journal
• /
• 제14권2호
• /
• pp.71-76
• /
• 2002

Metal thin films, which are indispensable constituents of ULSI (Ultra Large Scale Integration) circuits, have been fabricated by physical or chemical methods. However, these methods have a drawback of using expensive high vacuum instruments. In this work, the fabrication of tungsten metal film by spin coating was investigated. First of all, inorganic peroxopolytungstic acid (W-IPA) powder, which is soluble in water, was prepared by dissolving metal tungsten in hydrogen peroxide and by evaporating residual solvent. Then, the solution of W-IPA was mixed with organic solvent, which was spin-coated on wafers. And then, tungsten metal films, were obtained after reduction procedure. By selecting an appropriate organic solvent and irradiating UV, the sheet resistance of the tungsten metal film could be remarkably reduced.

• 한국분말재료학회지
• /
• 제6권2호
• /
• pp.132-138
• /
• 1999

A new binder system and debinding process for low carbon residue in the injection molding of Nd(Fe, Co)B powder are investigated. In the injection molding of magnetic materials, it is demanded to reduce carbon residue which deteriorates their magnetic properties. The binder system developed is composed of polyethylene glycols (PEGs) and polypropylene (PP). PEG was selected as a major binder is component to be extracted in a molecular state by solvent extraction in ethanol, which step would leave no residue. PP was selected as a minor binder component to be subsequently removed by thermolysis which step would leave carbon residue. The behaviors of solvent extraction with the variations of PEG molecular weight, temperature, and time were examined. The dependency of residual carbon content on thermolysis atmosphere was also studied. Opened pore channels introduced in a green body by the solvent extraction and microstructures of the sintered magnets were observed using SEM.

• 분석과학
• /
• 제20권3호
• /
• pp.246-250
• /
• 2007

The quantitative determination of chromium(VI) by separation from chromium(III) complex of 8-hydroxyquinoline using solvent extraction has been studied. The reaction conditions for chromium(III) complex of 8-hydroxyquinoline and the solvent extraction of complex were investigated in detail. The chromium(III) complex was extracted with organic solvent (n-hexane) and residual chromium(VI) was determined by ICP-AES in aqueous layer. This technique is quantitative in the pH range of 8-9 and the limitations such as interfering ions were discussed.

• 폴리머
• /
• 제26권3호
• /
• pp.307-315
• /
• 2002

폴리스티렌의 취약한 성질을 개선한 내충격정 폴리스티렌 (HIPS)의 내충격성에 영향을 주는 요소는 분산된 고무상 입자의 크기 및 입도분포, 분자량, 형태구조, 그래프트율 등이다. 이에 따라 HIPS의 물성은 영향을 받으므로 이를 조절하거나 파악하는 것은 중요하다. 본 연구에서는 HIPS의 벌크-용액중합에서 용매함량이 고무입자의 형태구조 및 입도분포, 최종 물성에 미치는 영향에 대하여 고찰하였다. 먼저 중합 진행에 따른 분산상의 입도분포를 측정함으로써 상역전 현상의 변화 추이를 파악하여 전중합 시간을 결정하였다. 중합시 분산용매는 적절한 양에 도달하기 전까지는 고무입자의 크기가 증가하였으며, 그 후에는 점차적으로 감소하였다. 고무상의 형태구조는 분산용매가 증가함에 따라서 그래프트율이 증가하는 형태구조로 바뀌는 것으로 사료된다. 분산용매가 첨가됨에 따라 유변물성 및 인장물성이 취약해졌는데, 이는 분산용매에 의한 사슬이동반응이 매트릭스상인 폴리스티렌의 분자량을 감소시킨 점과 잔류 용매의 존재 때문이었다. 하지만 내충격성은 분산입자의 크기가 증가한 경우 향상되는 경향을 보였다.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.20-25
• /
• 2009

Residual extractives had a noticeable impact on the brightness of unbleached hardwood kraft pulps (trembling aspen). The brightness-impacting extractives were effectively removed by oxygen delignification. In addition, oxygen delignification was more effective in removing chromophores in hardwood unbleached kraft pulps than in those of softwood (loblolly pine). The residual extractives in unbleached hardwood kraft pulps also affected the pulp color, primarily redness and the L value. These redness-related extractives in unbleached hardwood kraft pulps were also effectively removed by oxygen delignification. There were no significant color differences between untreated and solvent-extracted oxygen-delignified aspen kraft pulps. The residual extractives in unbleached and oxygen-delignified softwood (loblolly pine) kraft pulps did not have a significant impact on either brightness or pulp color.

• 한국기술사회:학술대회논문집
• /
• 한국기술사회 1984년도 제14회 한일기술사 합동 심포지움 참관기
• /
• pp.84-91
• /
• 1984

Heavy Residual Fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as Heavy Fuel Oil for large combustion engines, boilers, etc…. But this study was made to investigate Heavy Residual Fuel oils for using as industrial raw material and resulted the following possibilties as valuable raw material as well as Heavy Fuel Oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of Blown Asphalts, Cut Back Asphalts, Emulsified Asphalts and Asphalt Compound, etc…. 3) Using waxy oil side streams for manufacturing of raw oil to be Lube Oil base stocks through solvent dewaxing. 4) Production of lube base oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.