• 한국포장학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2004

Amount of residual ink solvent on the packaging materials from Korea, Japan and Europe was measured and compared. The amount of packaging materials from Korea was much higher than that of Japan and Europe. To reduce the residual amounts of ink solvent, aging condition of printed packaging materials including aging time and temperature was modified and evaluated. Aging with high temperature and short time ($60^{\circ}C$ and 24 hours) was more effective for reduction of residual amount of ink solvent than that with low temperature and long time. To find out change of reduction pattern of residual amount of solvent according to plastic packaging material, several monolayer and multilayer packaging materials were selected. Among the monolayer packaging materials, the amount of EVOH and PET was lower than that of polyolefin plastic film including PE and PP. PP/EVOH/PET among the selected multilayer film showed the lowest amount of residual ink solvent on food packaging materials. Result of this research revealed that the residual amount of ink solvent can be reduced by proper selection of aging condition with and by appropriate application of mutilayer plastic film.

• Mass Spectrometry Letters
• /
• 제14권2호
• /
• pp.36-41
• /
• 2023

A simple method was developed to determine residual p-arsanilic acid (ASA), an organo-arsenic compound used as a feed additive, in aquatic products (eel, halibut, and shrimp) using EDTA-assisted solvent extraction and LC-MRM. The method was successfully validated in terms of specificity, linearity (coefficient of determination ≥ 0.995), accuracy (recovery or R, 72.72-78.73%), precision (the relative standard deviation of R, 2.08-6.98%), and sensitivity (the lower limit of quantitation, 5 ppb) according to CODEX guidelines (CAC-GL 71-2009). The use of EDTA in the extraction solvent and water with a suitable pH modifier as the reconstitution solvent may be the key factors for successful results. This is the first method that can be used for monitoring residual ASA in aquatic products using LC-MRM and could contribute to establishing a better aquatic product safety management system.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.237-242
• /
• 2022

본 연구에서는 정제된(+)-dihydromyricetin로부터 잔류 용매를 효과적으로 제거할 수 있는 건조 방법을 개발하였다. 에탄올 전 처리를 통한 회전 증발(rotary evaporation)에 의해 잔류 아세톤 농도를 ICH 규정치(5,000 ppm) 이하로 효율적으로 제거하였다. 또한 잔류 에탄올 역시 물 첨가를 통한 회전 증발로 ICH 규정치(5,000 ppm)를 충족시켰으며 잔류 수분 함량은 4% 이내였다. 모든 건조 온도(35, 45, 55 ℃)에서 잔류 용매는 건조 초기에 급격히 제거되었으며 건조 효율은 건조 온도가 높을수록 증가하였다. 건조 메커니즘 조사 결과, 에탄올 전 처리에 의한 잔류 용매 제거는 아세톤-에탄올 혼합물의 높은 증기압과 아세톤-에탄올 간의 수소 결합과 연관됨을 알 수 있었다.

• 한국포장학회지
• /
• 제10권1호
• /
• pp.63-68
• /
• 2004

The regulations for migration amounts in USA, EU and Korea are investigated to compare the actual overall and specific migration date from plastic food packaging materials. Among the packaging materials regulated in above countries, printing ink solvents on packaging materials is used very widely and sometimes cause off-flavor in the food by migration of residual solvents. Even though migration of the residual solvents dose not generally cause safety problems in the contained food, it certainly can generate off-flavor and finally deteriorate quality of the finished product. Therefore regulation and development of analytical method for amount of residual ink solvents are very important issue in food industry. The headspace analytical method and tenax method for residual ink solvent on food packaging materials were evaluated from the accuracy, precise, swiftness and convenience of viewpoint. Headspace analytical method was selected and recommended for using in food industry field.

• 대한의생명과학회지
• /
• 제12권3호
• /
• pp.177-183
• /
• 2006

To demonstrate the effect of formulation conditions and evaluations of structural integrity from ovalbumin containing poly lactide glycolide copolymer (PLGA) microspheres for Vaccine delivery, OVA microspheres were prepared by a W/O/W multiple emulsion solvent extraction technique. Dichloromethan (DCM) and Ethyl acetate (EA) were applied as an organic phase and poly vinyl alcohol (PVA) as a secondary emulsion stabilizer. Microspheres were characterized for particle size, morphology (optical microscopy and Scanning Electron Microscope (SEM)). Protein denaturation was evaluated by size exclusion chromatography (SEC), SDS-PAGE and isoelectric focusing (IEF). Residual organic solvent was estimated by gas chromatography (GC) and differential scanning calorimetry (DSC). Optical photomicrograph and SEM revealed that micro spheres were typically spherical but various morphologies were observed. Mean particle size $(d_{vs})$ of microspheres were in the range of $3{\sim}50{\mu}m$. Also, The protein stability was not affected by the fonnulation process and residual organic solvent was beyond the detection below 0.1ppm. These results demonstrated that micro spheres might be a good candidate for the parenteral vaccine delivery system.

• Toxicological Research
• /
• 제34권2호
• /
• pp.111-125
• /
• 2018

Solvents can be used in the manufacture of medicinal products provided their residual levels in the final product comply with the acceptable limits based on safety data. At worldwide level, these limits are set by the "Guideline Q3C (R6) on impurities: guideline for residual solvents" issued by the ICH. Diisopropyl ether (DIPE) is a widely used solvent but the possibility of using it in the pharmaceutical manufacture is uncertain because the ICH Q3C guideline includes it in the group of solvents for which "no adequate toxicological data on which to base a Permitted Daily Exposure (PDE) was found". We performed a risk assessment of DIPE based on available toxicological data, after carefully assessing their reliability using the Klimisch score approach. We found sufficiently reliable studies investigating subchronic, developmental, neurological toxicity and carcinogenicity in rats and genotoxicity in vitro. Recent studies also investigated a wide array of toxic effects of gasoline/DIPE mixtures as compared to gasoline alone, thus allowing identifying the effects of DIPE itself. These data allowed a comprehensive toxicological evaluation of DIPE. The main target organs of DIPE toxicity were liver and kidney. DIPE was not teratogen and had no genotoxic effects, either in vitro or in vivo. However, it appeared to increase the number of malignant tumors in rats. Therefore, DIPE could be considered as a non-genotoxic animal carcinogen and a PDE of 0.98 mg/day was calculated based on the lowest No Observed Effect Level (NOEL) value of $356mg/m^3$ (corresponding to 49 mg/kg/day) for maternal toxicity in developmental rat toxicity study. In a worst-case scenario, using an exceedingly high daily dose of 10 g/day, allowed DIPE concentration in pharmaceutical substances would be 98 ppm, which is in the range of concentration limits for ICH Q3C guideline class 2 solvents. This result might be considered for regulatory decisions.

• 한국환경농학회지
• /
• 제39권1호
• /
• pp.44-49
• /
• 2020

BACKGROUND: Benzo(a)pyrene is a highly toxic substance which has been listed as a Group I carcinogen by the International Agency for Research on Cancer. There have been numerous studies by researchers worldwide on benzo(a)pyrene. Soxhlet, ultrasound-assisted, and liquid-liquid extractions have been widely used for the analysis of benzo(a)pyrene. However these extraction methods have significant drawbacks, such as long extraction time and large amount of solvent usage. To overcome these disadvantages, we aimed to establish a rapid residual analysis of benzo(a)pyrene content in agricultural products and soil samples. METHODS AND RESULTS: A Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method was used as the pretreatment procedure. For rapid residual analysis of benzo(a)pyrene, a modified QuEChERS method were used, and the best codition was demonstrated after various performing instrument analysis. The extraction efficiency of this method was also compared with Soxhlet extraction, the current benzo(a)pyrene extracting method. Although both methods showed high recovery rates, the rapid residual analysis method markedly reduced both the measurement time and solvent usage by approximately 97% and 96%, respectively. CONCLUSION: Based on these results, we suggest the rapid residual analysis method established through this study, faster and more efficient analysis of residual benzo(a)pyrene in major agricultural products such as rice, green and red chili peppers and also soil samples.

• 한국포장학회지
• /
• 제6권1호
• /
• pp.19-23
• /
• 2000

The increasing use of plastics in food packaging materials has led to the issue of food-packaging mutual interactions from residues in the plastics. Plastic films are commonly printed by using solvent-based ink to decorate the packaged food for consumer attention. However, the residual solvents can not be completely removed and they can migrate into the contained food which lead to undesirable off-flavors. Partitioning (Kp) of printing ink solvents was studied in two types of plastic films with different chemical structure and polarity. At $25^{\circ}C$, Kp of toluene is higher than that of isopropanol in PP, but isopropanol showed higher Kp value than toluene in EVOH. This showed that polarity had a significant effect on the partitioning of printing ink solvents into the plastic films. Printing solvents had a higher affinity to the polymer with similar polarity than it did to the different one.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.218-226
• /
• 2002

The purpose of the present study is to investigate the influence of thermal debinding and sintering conditions on the sintering behavior and mechanical properties of PIMed 316L stainless steel. The water atomized powders were mixed with multi-component wax-base binder system, injection molded into flat tensile specimens. Binder was removed by solvent immersion method followed by thermal debinding, which was carried out in air and hydrogen atmospheres. Sintering was done in hydrogen for 1 hour at temperatures ranging from 1000℃ to 1350℃ The weight loss, residual carbon and oxygen contents were monitored at each stage of debinding and sintering processes. Tensile properties of the sintered specimen varied depending on the densification and the characteristics of the grain boundaries, which includes the pore morphology and residual oxides at the boundaries. The sinter density, tensile strength (UTS), and elongation to fracture of the optimized specimen were 95%, 540 MPa, and 53%, respectively.

• 한국응용과학기술학회지
• /
• 제13권1호
• /
• pp.47-54
• /
• 1996

Cinnamoyl ester(PGEFC) of poly(phloroglucinol-formaldehyde) glycidyl ether which has photosensitive functional group was prepared to apply to photoresist. Photosensitivity of PGEFC was estimated by the solubility difference in organic solvent before and after exposure to light. The yield of residual film was calculated by immersing the sample-coated quartz plates in the solvent which was used in coating. The yield of the residual film which was closely related to the sensitivity of the film, was affected by the degree of polymerization of the backbone resin, sensitizers and their concentration. The sensitivity was depended upon the degree of polymerization. Most of effective sensitizer for PGEFC among the sensitizers was 2, 6-dichloro-4-nitroaniline.