• 한국지반공학회논문집
• /
• 제39권4호
• /
• pp.19-29
• /
• 2023

본 연구에는 지반-그라우트 인터페이스 거동을 평가하기 위한 직접전단시험 장비를 제작하였으며, 제작된 시험 장비를 통해 풍화토, 풍화토-그라우트 두 종류의 시료에 대해 직접전단시험을 수행하였다. 전단응력-슬립 곡선 평가 결과 풍화토-그라우트의 잔류 전단 강도는 단일 풍화토의 잔류 전단 강도와 유사한 값을 나타냈으며, 풍화토-그라우트 인터페이스의 한계 상태 거동은 풍화토에 의해 결정된다는 것을 확인했다. 그러나, 최대 전단 강도의 경우 풍화토-그라우트 인터페이스에서 매우 크게 증가하는 것으로 나타났다. 최대 전단 강도의 증가율은 느슨한 지반에서 더 크게 발생하는 것으로 나타났으며, 이는 풍화토 입자와 그라우트 입자가 섞여 있는 인터페이스 레이어의 두께가 증가했기 때문으로 보인다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.147-152
• /
• 2001

This study investigated one-dimensional vertical infiltration to an unsaturated residual soil by numerical solutions, FDM. In order to estimate the parameters needed for numerical analysis, tire soil-water characteristic curve(SWCC) of Shinnae-dong soil, one of the most typical residual soils in Korea, were experimentally obtained. Then, the statistical analysis for obtaining the SWCC was performed. The numerical solution to the linearized governing equation for unsaturated groundwater flow provides the infiltration characteristics for the unsaturated residual soil represented by transient pressure profiles and water contents profiles.

• Geomechanics and Engineering
• /
• 제7권6호
• /
• pp.633-647
• /
• 2014

Biopolymers, polymers produced by living organisms, are used in various fields (e.g., medical, food, cosmetic, medicine) due to their beneficial properties. Recently, biopolymers have been used for control of soil erosion, stabilization of aggregate, and to enhance drilling. However, the inter-particle behavior of such polymers on soil behavior are poorly understood. In this study, an artificial biopolymer (${\beta}$-1,3/1,6-glucan) was used as an engineered soil additive for Korean residual soil (i.e., hwangtoh). The geotechnical behavior of the Korean residual soil, after treatment with ${\beta}$-1,3/1,6-glucan, were measured through a series of laboratory approaches and then analyzed. As the biopolymer content in soil increased, so did its compactibility, Atterberg limits, plasticity index, swelling index, and shear modulus. However, the treatment had no effect on the compressional stiffness of the residual soil, and the polymer induced bio-clogging of the soil's pore spaces while resulting in a decrease in hydraulic conductivity.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.143-148
• /
• 2005

Plastics and vinyl resin is generally used in the various fields of industry and daily life. Except incineration, most waste has been disposed finally in landfill and the leaching of plasticizer as DEHP(di 2-ethylhexyl phthalaet) has been taken place in the landfill. DEHP had been found. for endocrine disrupter by World Wild Life Fund and Japan. In this study aimed at estimation of capacity of adsorption and measurement of phthalate ester in the residual soil. The residual soil had been gathered from three closed landfill which was under stabilization with sorting and transferring. The Dibutyl phthalate and DEHP had been contained in all residual soil. Especially, resisual soil contained DEHP much more than peripheral soil. In J landfill residual soil, organic matter content, CEC and #200 sieve passing ratio is highest, and Freundlich isotherm sorption coefficient(K) and constant(1/n) is highest.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.53-66
• /
• 2015

Plastic wastes, particularly polyethylene terephthalate (PET) generated from used bottled water constitute a worldwide environmental issue. Reusing the PET waste for geotechnical applications not only reduces environmental burdens of handling the waste, but also improves inherent engineering properties of soil. This paper investigated factors affecting shear strength improvement of PET-mixed residual soil. Four variables were considered: (i) plastic content; (ii) plastic slenderness ratio; (iii) plastic size; and (iv) soil particle size. A series of unconfined compression tests were performed to determine the optimum configurations for promoting the shear strength improvement. The results showed that the optimum slenderness ratio and PET content for shear strength improvement were 1:3 and 1.5%, respectively. Large PET pieces (i.e., $1.0cm^2$) were favorable for fine-grained residual soil, while small PET pieces (i.e., $0.5cm^2$) were favorable for coarse-grained residual soil. Higher shear strength improvement was obtained for PET-mixed coarse-grained residual soil (148%) than fine-grained residual soils (117%). The orientation of plastic pieces in soil and frictional resistance developed between soil particles and PET surface are two important factors affecting the shear strength performance of PET-mixed soil.

• Geomechanics and Engineering
• /
• 제28권1호
• /
• pp.35-48
• /
• 2022

The effect of discrete polypropylene fibre reinforcement on shear strength parameters, tensile properties and isotropic index of stabilized compacted residual subgrade was investigated. Composites of compacted subgrade were developed from polypropylene fibre dosage of 0%, 1%, 2.5% and 4% and 3% cement binder. Saturated compacted soil benefited from incremental fibre dosage, the mobilized friction coefficient increased to a maximum at 2.5% fibre dosage from 0.41 to 0.58 and the contribution due to further increase in fibre dosage was marginal. Binder stabilization increased the degree of isotropy for unreinforced soil at lower fibre dosage of 1% and then decreased with higher fibre dosage. Saturation of 3% binder stabilized soil decreased the soil friction angle and the degree of isotropy for both unstabilized and binder stabilized soil increased with fibre dosage. The maximum tensile stress of 3% binder stabilized fibre reinforced residual soil was 3-fold that of 3% binder stabilized unreinforced soil. The difference in computed and measured maximum tensile and tangential stress decreased with increase in fibre dosage and degree of stabilization and polypropylene fibre reinforced soil met local and international criteria for road construction subgrade.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.743-750
• /
• 2002

Unsaturated soil has a possibility to induce a negative pore water pressure. Until now, saturated soil is mainly focused on the research of soil mechanics. Recently, soil mechanics is researched on two major parts such as saturated and unsaturated soil mechanics. Negative pore water pressure has a non-linear relationship with the water content changes. Soil-water characteristic curves of soil in Korea are not determined. There is no proper characteristic value such as air-entry value and residual water content. In this study, the characteristic curves of reclaimed soil, sand, and weathered granite soil were determined by laboratory tests. Air-entry value and residual water content were determined by fitting methods. Soil-water characteristic curves were estimated based on the particle-size distribution and compared with the laboratory test results. The results of soil-water characteristic curves estimation indicated that Fredlund and Wilson's model is excellent for sand and weathered granite soil. Arya and Paris's model is excellent for reclaimed soil.

• Geomechanics and Engineering
• /
• 제28권4호
• /
• pp.405-419
• /
• 2022

Cavity expansion and contraction solutions for cylindrical and spherical cavities in unsaturated residual soils are presented in this paper. Varying soil state in the plastic zone is accounted by a numerical approach, wherein an element-by-element discretization of the plastic zone of both expanding and contracting cavities is carried out. Unlike existing methods utilizing self-similarity technique, the solution procedure enables the prediction of entire soil-state at any stage of expansion and subsequent contraction. It is also applicable for both cavity creation and expansion problems. The approach adopts constant contribution of suction to effective stress (constant X^s drainage condition) for analysis. The analysis procedure is validated by interpreting the previously reported pressuremeter test results in lateritic residual soil. The typical cavity expansion and contraction characteristics of unsaturated Indian lateritic soil were then examined using this solution procedure. The effect of initial soil-state on cavity limit pressure, plastic radius, reverse yield pressure, and reverse plastic radius are also presented.

• 한국지반공학회논문집
• /
• 제20권1호
• /
• pp.75-82
• /
• 2004

본 연구에서는 지지대상층이 아닌 투수 대상층으로서의 풍화토 지반에 초점을 맞추어 불교란 풍화토 시료를 이용해 다양한 구속압 조건에서 동수경사를 변화 시켜가면서 연성벽체 투수시험을 수행하였다. 동수경사 및 구속압이 풍화토의 투수특성에 미치는 영향을 투수계수를 이용하여 분석하였으며, 사질토에 대해서도 유사한 시험을 수행하여 사질토와는 구별되는 풍화토만의 침투 특성을 평가하였다. 또한 풍화토 지반의 파이핑 특성을 분석하기 위하여 모형 파이핑 시험을 수행하였다. 실험결과로부터 동수경사의 범위에 따라 풍화토는 서로 다른 투수특성을 보임을 알 수 있으며, 파이핑에 대하여 사질토에 비해 매우 높은 저항 능력을 가짐을 알 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권3호
• /
• pp.231-239
• /
• 2003

국내에서는 많은 기초설계가 표준관입시험(SPT)의 N값을 적용하고 있으며, 콘관입시험(CPT)의 효용성 증가로 인해 SPT와 CPT의 상관관계를 설계에 이용하고 있는 실정이다. SPT와 CPT의 상관관계에 대한 연구는 지난 30년 동안 해외에서 많이 진행되어 왔으나 잔류토층에 대한 연구는 미흡한 실정이다. 이는 지역마다 잔류토층의 특성이 달라 그 상관관계의 분산이 크기 때문이다. 따라서 국내 잔류토층의 특성에 맞는 SPT와 CPT의 상관관계 정립을 위하여 SM으로 분류된 잔류토층에 대한 분석을 실시하였으며, 그 결과 $q_t/N_{60}=0.3$으로 분석되었다.