• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.2
• /
• pp.177-186
• /
• 2017

This study concerned the analysis on the efficiency of the conversion of water tank type supply system to direct water supply system to examine the feasibility of the conversion, as well as the calculation of optimal conversion range that enables the supply of safe, high-quality water at stable pressure in accordance with the standards of water supply facility. The results of this research showed that when converting water supply system from water tank type supply system to direct water supply system, more nodal points could be properly converted and more reduction of electricity usage was expected in case water pressure rather than residence time was fixed. This means that higher efficacy can be obtained by fixing water pressure when converting water supply system. However, since the number of the locations that received on-spot inspection was small and the electricity usage measured was not exclusively by water supply facility, it is difficult to judge that such reduction of electricity usage accurately represents reduced electricity usage by water supply facility alone. therefore, after having secured on-spot information about a larger number of locations in apartment complexes that have converted water supply system, and utilizing information about electricity usage exclusively by water supply facility, the proposed method of this research could be applied to accurately deducing expected reduction of electricity usage by water supply facilities of various other apartment complexes. It is also considered possible to deduce an effective operation method of water supply system by finding out an area that shows low pressure or low residual chlorine concentration in the optimal conversion range of water supply, followed by estimating the proper location of pumping station or the proper chlorine dosage at the power purification plant that supply water to the target area.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.29-40
• /
• 2013

Seismic response of single degree of freedom system supported by shallow foundation was analyzed by using nonlinear explicit finite difference element code. Numerical analysis results were verified with dynamic centrifuge test results of the same soil profile and structural dimensions with the numerical analysis model at a centrifugal acceleration of 20 g. Differences between the analysis and the test results induced by the boundary conditions of control points can be reduced by adding additional local damping to the natural born cyclic hysteretic damping of the soil strata. The analysis results show good agreement with the test results in terms of both time histories and response spectra. Thus, it can be concluded that the nonlinear explicit finite difference element code will be a useful technique for estimating seismic residual displacement, earthpressure etc. which are difficult to measure during laboratory tests and real earthquake.

• Korean Journal of Biological Psychiatry
• /
• v.18 no.4
• /
• pp.210-216
• /
• 2011

Subsyndromal depression (SSD) is found to be more prevalent than major depressive disorder (MDD) and minor depressive disorder (MnDD). SSD is also associated with adverse clinical outcomes, increased risk of suicide, increased social dysfunction and disability, increased risk for future mood disorders, and increased uses of medical and mental health services. DSM-IV diagnostic criteria are not suitable for capturing SSD. Although there is no agreement on gold standard to define SSD so far, three definitions of SSD are available. First, SSD is defined as having two or more current depressive symptoms without core depressive symptoms (depressive mood or loss of interest) and with time threshold (most of the day and nearly every day over at least two weeks). Second, SSD is defined as having two or more current depressive symptoms with core depressive symptoms and without time threshold. Third, SSD is defined by using cutoff points of depression rating scales. SSD may represent a prodromal, residual, or interepisode symptomatic state in the course of MDD and MnDD. More than a half of SSD patients became any type of depressive disorders (SSD, MnDD and MDD) at 1 year. SSD may represent a discrete category of its own, without prior or consequent episodes of MDD. Considering clinical significance of SSD such as its high prevalence, significant psychosocial impairment and chronicity and serious outcomes, researchers and clinicians should be more vigilant in capturing and caring for patients with SSD.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.225-230
• /
• 2004

A plasminogen kringle domain 1 to 3, rKl-3, was expressed in Escherichia coli under the control of T7 promoter. For the cost-effective production of rKl-3, the induction process was analyzed and optimized. Induction characteristics with lactose were analyzed in terms of induction time and inducer concentration in various culture conditions including batch and high-cell-density fed-batch cultures. In the fed-batch culture, the induction around 6 h after initiation of the DO-stat fed-batch culture resulted in the highest expression level of rKI-3 among the induction points examined. The highest demand of oxygen at this point was crucial for the maximum expression level of rKI-3. As the lactose concentration increased, the expression level also increased, though the expression level showed a plateau above a concentration of 14 mM of lactose. Lactose acted less specifically than IPTG since most of it was hydrolyzed to glucose and galactose. However, using lactose, the cell growth and the maximum expression level of rKl-3 increased by 20% and 24%, respectively, compared with those using IPTG in the fed-batch culture. The lactose seemed to be hydrolyzed by intracellular and extracellular $\beta$-galactosidase liberated by cell lysis at the same time. Residual concentration of glucose was maintained to a a limit of detection by high performance liquid chromatography, and galactose was not consumed by the host strain Escherichia coli BL2l(DE3).

• Ocean Science Journal
• /
• v.42 no.3
• /
• pp.153-163
• /
• 2007

This study is based on a series of numerical modeling experiments to understand the tidal circulation in the Kangjin Bay (KB). The tidal circulation in the KB is mostly controlled by the inflow from two channels, Noryang and Daebang which introduce the open ocean water into the northern part of the KB with relatively strong tidal current, while in the southern part of the KB, shallowest region of the entire study area, weak tidal current prevails. The model prediction of the sea level agrees with observed records at skill scores exceeding 90 % in terms of the four major tidal constituents (M2, S2, K1, O1). However, the skill scores for the tidal current show relatively lower values of 87, 99, 59, 23 for the semi-major axes of the constituents, respectively. The tidal ellipse parameters in the KB are such that the semi-major axes of the ellipse for M2 range from 1.7 to 38.5 cm/s and those for S2 range from 0.5 to 14.4 cm/s. The orientations of the major-axes show parallel with the local isobath. The eccentricity values at various grid points of ellipses for M2 and S2 are very low with 0.2 and 0.06 on the average, respectively illustrating that the tidal current in the KB is strongly rectilinear. The magnitude of the tidal residual current speed in the KB is on the order of a few cm/s and its distribution pattern is very complex. One of the most prominent features is found to be the counter-clockwise eddy recirculation cell at the mouth of the Daebang Channel.

• Korean Journal of Organic Agriculture
• /
• v.12 no.2
• /
• pp.219-230
• /
• 2004

In recent years, the consumption of livestock products were markedly decreased by awareness of world-widely occurred diseases including mad cow disease, Foot and mouth disease, Hog cholera, and Poultry Influenza virus. the consumers ara also wanting to have highly safe food such as organic animal products because of concerning about residual of antibiotics in animal products. However, disease control and impairment of productivity are the major problem in organic animal production. On these points of view, the present study was undertaken to investigate the effects of 1% or 2% of dietary probiotics fortified with various minerals on improvement of egg production and egg quality in old lay6r feeding low quality feed mainly composed of food waste, sesame meal, and rice bran. After 4 weeks of experimental feeding, the diameter of spreading of egg white was clearly decreased from 11.2cm of control eggs to 10.5m and 10.1m in 1% and 2% treatment group eggs, respectively. The color of egg yolk was 9.3 in control eggs but remarkably increased in treatment groups showing 10.1~10.2. Egg production was 75.8% in control layers but significantly increased to 79.8% of 1% treatment group and 82.9% of 2% treatment group layers. Egg weights (C : 66.3g, 1% : 73.2g, and 2% : 76.7g) and egg shell thickness (C : 0.33mm, 1% : 0.35mm and 2% : 0.36mm) were also increased by the addition of 1% or 2% of probiotics when compared to those of control group eggs. All together, it has been suggested that dietary addition of probiotics fortified with various minerals can improve the egg quality and egg production in layer's productivities by the recycling of organic waste resources such as food waste and agricultural by-products.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.847-858
• /
• 2016

An overview is given on the work of the Laboratory of Nuclear Energy Systems at ETH, Zurich (ETHZ) and of the Laboratory of Thermal Hydraulics at Paul Scherrer Institute (PSI), Switzerland on tight-lattice bundles. Two-phase flow in subchannels of a tight triangular lattice was studied experimentally and by computational fluid dynamics simulations. Two adiabatic facilities were used: (1) a vertical channel modeling a pair of neighboring sub-channels; and (2) an arrangement of four subchannels with one subchannel in the center. The first geometry was equipped with two electrical film sensors placed on opposing rod surfaces forming the subchannel gap. They recorded 2D liquid film thickness distributions on a domain of $16{\times}64$ measuring points each, with a time resolution of 10 kHz. In the bubbly and slug flow regime, information on the bubble size, shape, and velocity and the residual liquid film thickness underneath the bubbles were obtained. The second channel was investigated using cold neutron tomography, which allowed the measurement of average liquid film profiles showing the effect of spacer grids with vanes. The results were reproduced by large eddy simulation + volume of fluid. In the outlook, a novel nonadiabatic subchannel experiment is introduced that can be driven to steady-state dryout. A refrigerant is heated by a heavy water circuit, which allows the application of cold neutron tomography.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.124-130
• /
• 2007

Least squares ($l^2$ norm) solutions of seismic inversion tend to be very sensitive to data points with large errors. The $l^1$ norm minimization gives more robust solutions, but usually with higher computational cost. Iteratively reweighted least squares (IRLS) method gives efficient approximate solutions of these $l^1$ norm problems. I propose an efficient implementation of the IRLS method for a hybrid $l^1/l^2$ minimization problem that behaves as $l^2$ norm fit for small residual and $l^1$ norm fit for large residuals. The proposed algorithm shows more robust characteristics to the decision of the threshold value than the l1 norm IRLS inversion does with respect to the threshold value to avoid singularity.

• Korean Journal of Optics and Photonics
• /
• v.25 no.5
• /
• pp.273-278
• /
• 2014

We present an algorithm for surface reconstruction from the second-derivative data for free-form aspherics, which uses a subaperture scanning system that measures the local surface profile and determines the three second-derivative values at those local sampling points across the free-form surface. The three second-derivative data were integrated to get a map of x- and y-slopes, which went through a second Southwell integration step to reconstruct the surface profile. A synthetic free-form surface 200 mm in diameter was simulated. The simulation results show that the reconstruction error is 19 nm RMS residual difference. Finally, the sensitivity to noise is diagnosed for second-derivative Gaussian random noise with a signal to noise ratio (SNR) of 16, the simulation results proving that the suggested method is robust to noise.