• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.12 no.1
• /
• pp.5-24
• /
• 2001

This study was focused on the sanitary analysis of hazard factors and the establishment of critical control points on steak-set menu In hotel by the documents and microbiological investigation. The hazard factors of shrimp cocktail were microbial contamination, residual pesticides, unsuitable healing and cross contamination. The hazard factors of potato soap were residual pesticides, microorganisms contamination, unsuitable heating and solanine in potato. The hazard factors of simple salad were microorganisms contamination, unsuitable heating and cross contamination by inappropriate package. The hazard factors of steal were residual antimicrobial drugs, microorganisms contamination, unsuitable heating and cross contamination. The critical control points of shrimp cocktail were temperature control , number of washing and center temperature control of heating step. The critical control points of potato soup were stock temperature control , number of washing and center temperature control of Heating step. The critical control points of simple salad were number of washing and dryness of utensil. The critical control points of steak were stock temperature control , number of washing, center temperature and time control of heating step.

• PNF and Movement
• /
• v.16 no.1
• /
• pp.19-26
• /
• 2018

Purpose: The purpose of this study was to investigate changes in urinary frequency, residual urine volume, and quality of life following pelvic floor exercises using proprioceptive neuromuscular facilitation (PNF) exercise patterns and EMG biofeedback training in patients with stress urinary incontinence. Methods: The subjects were male patients diagnosed with stress urinary incontinence. This study used a single system design (A-B-C.) At baseline, the patients' symptoms prior to the treatment intervention were recorded (A section). Next, the patients performed the PNF exercise (B section). Thereafter, they performed the PNF exercise, with EMG biofeedback (C section). The subjects performed the exercises in each section for 1 week for a total of 3 weeks. Urinary frequency, residual urine volume, and quality of life of the subjects were measured. Results: The frequency of urination was 9 times in A, 8 times in A 'and B, and 7 times in C. The amount of residual urine decreased from 23.78ml in A to 21.85ml in A ', 14.85ml in B, and 14.63ml in C. The international prostate symptom score was 16 points in A, 14 points in A ', 11 points in B, and 7 points at A. The quality of life score was 4 points in A, 4 points in A ', 3 points in B, and 2 points in A. Conclusion: Both the PNF exercise and EMG biofeedback decreased urination frequency and residual urine volume and improved the quality of life of patients with stress urinary incontinence. EMG biofeedback training using the PNF technique was the most effective.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.128-142
• /
• 2021

Purpose: This study examines the safety management of anchors that have already been constructed and evaluates the results of lift-off tests conducted at the site. The purpose of the project is to study countermeasures if necessary. Method: Compare the residual load gained after the lift-off test at 36 points behind the site with the preemptive load, allowable load, and design load. We also analyze stability through this and evaluate the stability of anchors. Results and Conclusion: The residual tension at 26 points remained stable. However, the residual load at 10 points was analyzed to be greater than the designed load and less than the allowable load, and it was evaluated as an instability that could cause fracture problems. Therefore, anchors with unstable conditions at 10 points should be monitored and monitored through periodic measurements and quality tests, and the anchor should be observed at the surrounding points as well as the relevant points to maintain stability.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.8-15
• /
• 2003

In this study, chlorine dose at water storage tank was predicted to meet the recommended guideline for free chlorine residual in drinking water distribution system, using EPANET which is a computer program that performs extended Period simulation of hydraulic and water quality behavior within pressurized pipe networks. The results may be summarized as follows. The decay of chlorine residual by season varied considerably in the following order; in summer ($25^{\circ}C$) > spring and fall (15$^{\circ}C$) > winter (5$^{\circ}C$). For re-chlorination at water storage tank by season, season-varying chlorine dose was required at its maximum of 1.00 mg/l in summer and minimum of 0.40 mg/l in winter as free chlorine residual. The decay of chlorine residual through out the networks increased with water age spent by a parcel of water in the network except for some points with low water demand. In conclusion, the season-varying chlorine dose as well as the monitoring of water quality parameters at the some points which showed high decay of chlorine residual may be necessary to deliver the safe drinking water.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1168-1170
• /
• 2003

The GMS geometric correction method with highspeed and high accuracy is needed. In this paper, a selection method of residual errors for the GMS geometric correction using GCPs (ground control points) is described. Namely, it is a technique for limiting the number of residual error acquisition using GCPs in each block to reduce the processing time. As the result, since the processing time was about 7.0 minutes on conventional geometric correction and about 5.6 minutes on the proposed method, it was shown that the processing time of about 1.4 minutes was shortened.

• Journal of Korean Society for Quality Management
• /
• v.23 no.3
• /
• pp.93-101
• /
• 1995

We present a brief survey concerning the relations between mean residual life and failure rate. Change points of mean residual life and failure rate are known to be different in general and we explore such situations in this paper. A few parametric models which show bathtub-shaped failure rate are examined in details, including the shape of its corresponding mean residual life function. We give some graphical comparisons of trend changes of mean residual life and failure rate for various choices of parameters for each parametric model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3033-3045
• /
• 1996

In this paper, we propse an object-oriented coding method in low bit-rate channels using pyramid structure and residual image compensation. In the motion estimation step, global motion is estimated using a set of multiresolution images constructed in a pyramid structure. We split an input image into two regions based on the gradient value. Regions with larte motions obtain observation points at low resolution level to guarantee robustness to noise and to satisfy a motion constraint equation whereas regions with local motions such as eye, and lips get observation points at the original resolution level. Local motion variations and intesity variations of an image reconstructed by the golbal motion are compensated additionally by using the previous residual image component. Finally, the model failure (MF) region is compensated by the pyramid mapping of the previous displaced frame difference (DFD). Computer simulation results show that the proposed method gives better performance that the convnetional one in terms of the peak signal to noise ratio (PSNR), compression ratio (CR), and computational complexity.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.40-45
• /
• 2003

Steel members have advantages of resisting torsion and axial compression. In design, residual stresses at the welded joint of T-shape steel pipes are one of the most important points to be considered. In this paper, characteristics of residual stresses of welded joints are clarified by carrying out 3D non-steady heat conduction analysis and 3D thermal elastic-plastic FE-analysis. According to the results, the production mechanism of residual stresses at the welded joint of T-shape steel pipe is clarified. In this paper, circumferential stresses depended on thermal histories but axial and radial stresses were more dependent on geometrical shape than thermal histories. Residual stresses in the axial direction on the lower part of pipe member were tensile, controlled by geometrical shape. However, in case of middle part, residual stresses in all the directions were controlled by thermal histories.

• Journal of the Korean Mathematical Society
• /
• v.59 no.2
• /
• pp.337-352
• /
• 2022

We consider the set of points with historic behavior (which is also called the irregular set) for continuous flows and suspension flows. In this paper under the hypothesis that (X_t)_t is a continuous flow on a d-dimensional Riemaniann closed manifold M (d ≥ 2) with gluing orbit property, we prove that the set of points with historic behavior in a compact and invariant subset ∆ of M is either empty or is a Baire residual subset on ∆. We also prove that the set of points with historic behavior of a suspension flows over a homeomorphism satisfyng the gluing orbit property is either empty or Baire residual and carries full topological entropy.

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.233-236
• /
• 1999

The welding residual stress should be considered in fatigue stress analysis because it develope during the process of the electric resistance spot welding and it causes bad affect on the fatigue crack initiation and growth at nugget edge of spot welded points. Therefore the accurate estimation of residual stress is crucial. In this study, nonlinear finite element analysis on welding residual stress generated during the process of the spot welding was conducted, and their results were compared with the experimental data measured by X-ray diffraction method. From the results, it was found that welding residual stress existed as tension in the nugget center and as compression around the nugget edge.