• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.63-66
• /
• 2017

All passenger ships aboard more than 36 passengers are to be able to easily find escape routes when the escape way by fire with flame spread were onboard vessel (incl. Ferry, Passenger, Ro-pax, Inland Ferry) It should be impossible by ordinary emergency lights. The international Maritime Organization (IMO) gives special requirement for luminescent evaluation onboard test procedure and applicable location of low location lighting. In order to maintain the residual light source for a certain time in the low location lighting with a strip-shaped light source, the light source material must be sufficiently exposed to the light due to the proper placement of the escape route. The lighting arrangement influence how maintain low location lighting strip luminescent which measured onboard in connection with what elements are mainly sustain luminescent.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.281-287
• /
• 2004

In this paper, the refined plastic-hinge analysis accounting for gradual yielding with fibers on a section is developed. Geometric nonlinearities of member(P-δ) and frame(P-Δ) are accounted for by using stability functions. Residual stresses are considered by assigning initial stresses to the fiber on the section. The elastic core in a section is investigated at every loading step to determine the axial and bending stiffness reduction. The strain reversal effect is captured by investigating the stress change of each fiber. The proposed analysis proves to be useful in applying for practical analysis and design of three-dimensional steel frames.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.459-464
• /
• 2001

The main object of this study is to develop a reliable FEM simulation technique for the analysis of Steel D&I Can bodymaking process using ABAQUS software. The body making process includes drawing, redrawing, 3 step ironing, doming. The newly developed FEM code in this research is based on the previous research achievement of POSCO for the drawing, redrawing and ironing process. The analysis is performed using two dimensional axisymmetric elements to analyze the punch force, the height of can, the distribution of residual stress and strain. The effect of blank thickness, gap of ironing die is also analyzed.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1703-1711
• /
• 2003

An elastic-plastic finite element analysis is performed to investigate detailed closure behaviour of fatigue cracks in residual stress fields and the numerical results are compared with experimental results. The finite element analysis performed under plane stress using contact elements can predict fatigue crack closure behaviour. The mesh of constant element size along crack surface can not predict the opening level of fatigue crack. Specially, the mesh of element sizes depending upon the reversed plastic zone size included the effect of crack opening point can precisely predict the opening level. By using the concept of the mesh of element sizes depending upon the reversed plastic zone size included the effect of crack opening point, the opening level of fatigue crack can be determined very well.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.307-311
• /
• 2016

Although there are existing Residual Current Protective Device (RCD) including detect electric leakage and elements such as short circuit and surge, the occurrence of incidents caused by electric faults, including fire, are still constant. The purpose of this study is to analyze the causes of accidents through the electric field distribution in the interpretation of the fault contact breaker. Simulation results by the arc fault has shown the convergence of temperature and electric field to the defect. Through their simulation results, the main cause of erosion phenomena in circuit breaker bar is the electric arc by concentration of electric field not due to dissolve by temperature.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.25-32
• /
• 1988

본 연구에서는 8절점 28자유도를 갖는 사각형 고차 판 유한 요소를 면내고차 변위를 고려하여 3차원 연속체로부터 유도하였다. 요소매트릭스들은 판의 운동방정식으로부터 Galerkin 가중잔차법으로 유도하고 감차적분을 수행하여 구하였다. 고차 판 유한요소를 이용하여 판의 처짐해석과 자유진동해석을 수행한 결과 판의 두께와 경게조건에 관계없이 매우 정확한 결과를 나타내었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.456-459
• /
• 2005

Continuous cooling transformation behaviors were studied fur low carbon HSLA steels containing three different level $(1\~3\;wt\%)$ of Ni addition. Thermo-mechanical processing (TMP) simulations to construct continuous cooling (CCT) diagram were conducted by using Gleeble system. As cooling rate increased, pearlite, granular bainite, acicular ferrite, bainitic ferrite and lath martensite were transformed from deformed austenite. Fully bainitic microstructure were developed at all cooling rate condition in high Ni containing steel due to hardenability increasing effects of Ni. Ni also influenced the transformation kinetics. At the slowest cooling rate of $0.3^{\circ}C/s$, transformation delayed with decreasing Ni contents because of the diffusion of substitutional alloy elements. However, cooling rate slightly increased to $1^{\circ}C/s$, transformation kinetics accelerated with decreasing Ni contents because nucleation of bainite was sluggish due to hardening of residual austenite.

• 자원환경지질
• /
• 제27권4호
• /
• pp.397-409
• /
• 1994

지각의 두께에 따른 지열류량을 표시한 그림에서 나타나는 산만성은 다른 두개의 구조구를 전제하고 지구 동력학적 과정과 열적 감쇠현상을 적용하면 설명이 분명하게 된다. 높은 지열류량은 지각이 가늘게 확장되어 얇아진 열곡지역뿐만 아니라 트러스트 구조작용으로 지각이 두껍게 되고 지각의 열생산이 많은 조산대 지역의 특징이다. 지질학적 시간이 경과함에 따라서 지각평형작용에 의해 두꺼운 지각은 융기와 침식작용으로 얇게 되며 얇은 지각은 침강과 퇴적작용으로 두껍게 된다. 지열류량은 배경의 맨틀 지열류량과 평형을 이루는 값까지 감소하게 된다.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2932-2943
• /
• 1994

An efficient approach to the automatic construction of effective quadrilateral finite element meshes for two-dimensional analysis is presented. The procedure is composed of, firstly, an initial mesh generation and, secondly, an h-version of adaptive refinement based on error analysis. As for an initial mesh generation scheme, a modified looping algorithm has been employed. For the adaptive refinement process, an error indicator obtained by computing the residual error of the equilibrium equations in the energy norm with a relaxation factor has been employed. Examples of mesh generation and self-adaptive mesh improvements are given. These example solutions demonstrate that an effective mesh for a given error tolerance can be obtained in a few steps of the analysis processes.

• Environmental Analysis Health and Toxicology
• /
• 제12권3_4호
• /
• pp.67-73
• /
• 1997

This study was carried out to investigate the contents of heavy metals such as iron, copper, lead, cadmium, magnesium, platium in connection with water pollution in sea weed (dried laver) collected from the west, south, south- west, and east coasts of Korea. The results of the study are as follows; Iron was shown the highest value (1.280ppm) in the wild laver from the south coast. Copper was detected in larger qauntities (0.169 ppm) in green laver than in any other kinds of laver observed in this study. Lead was detected in larger quantities (0.195ppm) in the usual laver and green laver from the south-west coast as compared with the other coasts. Although cadmium and platium was also detected from every kind of laver, the concentrations were not over the allowance of the residual.