• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.65-73
• /
• 2012

In this study, we tested structural performance of Half-Decked PSC girder which was developed for applying to long span bridge. We operated 4 point bending test with 60 m span full scale girder designed as simple bridge with hinge-roller boundary condition. Actuators were set on the both sides of girder, 5.5 m away from the center, and 4 stages of cyclic loading was applied at rate of 1 kN/sec. Through stages 1 to 4, loading and unloading 1,000 kN, 1,200 kN, 1,500 kN, and 2,000 kN were repeated and displacement, strain of concrete and steel, crack of girder were checked. From these results, the strength of girder was assessed and resilience and ductility were observed after removing the load. Since initial flexural crack occurred in the vicinity of 1,400 kN, non-linearity of load-displacement curve appeared and definite residual strain was measured at that point. The test result showed that initial cracking load was over twice the DB-24 load which means the developed girder had sufficient strength. To verify the experimental results, we numerically analyze the test and confirmed that the data were similar with results from the test above. Half-Decked PSC type of 60 m-girder developed in this study showed its adequate structural capacity through static loading test, which proved that possibility of applying the girder to actual bridges practically.

• Journal of Animal Science and Technology
• /
• v.58 no.7
• /
• pp.24.1-24.7
• /
• 2016

Background: Clinoptilolite is a natural zeolite with high adsorption capacity for polar mycotoxins such as aflatoxins. The efficacy of clinoptilolite in ameliorating the toxic effects of aflatoxicosis has been proven in monogastric animals, but there is no such evidence for ruminants. The aim of this study was to evaluate, under field conditions, whether the dietary administration of clinoptilolite in dairy cows could reduce the concentration of aflatoxin M1 ($AFM_1$) in bulk-tank milk, in farms with higher than or close to $0.05{\mu}g/kg$ of milk (European maximum allowed residual level). An objective of the present study was also to investigate the effect of particle size of clinoptilolite on aflatoxin binding. Methods: Fifteen commercial Greek dairy herds with AFM1 concentrations in bulk tank milk ${\geq}0.05{\mu}g/kg$ were selected. Bulk tank milk AFM1 was determined prior to the onset and on day 7 of the experiment. Clinoptilolite was added in the total mixed rations of all farms at the rate of 200 g per animal per day, throughout this period. Two different particle sizes of clinoptilolite were used; less than 0.15 mm in 9 farms (LC group) and less than 0.8 mm in 6 farms (HC group). Results: Clinoptilolite administration significantly reduced $AFM_1$ concentrations in milk in all farms tested at an average rate of 56.2 % (SD: 15.11). The mean milk $AFM_1$ concentration recorded on Day 7 was significantly (P < 0.001) lower compared to that of Day 0 ($0.036{\pm}0.0061$ vs. $0.078{\pm}0.0074{\mu}g/kg$). In LC group farms the reduction of milk $AFM_1$ concentration was significantly higher than HC group farms ($0.046{\pm}0.0074$ vs. $0.036{\pm}0.0061{\mu}g/kg$, P = 0.002). As indicated by the Pearson correlation, there was a significant and strong linear correlation among the milk $AFM_1$ concentrations on Days 0 and 7 (R = 0.95, P < 0.001). Conclusions: Dietary administration of clinoptilolite, especially of smallest particle size, at the rate of 200 g per cow per day can effectively reduce milk $AFM_1$ concentration in dairy cattle and can be used as a preventive measure for the amelioration of the risks associated with the presence of aflatoxins in the milk of dairy cows.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.65-72
• /
• 2003

Adsorption and desorption characteristics of methyl iodide at high temperature conditions up to 25$0^{\circ}C$ by TEDA-impregnated activated carbon and silver-ion exchanged zeolite(AgX-10), which are used for radioiodine retention in nuclear facility, were experimentally evaluated. In the range of temperature from 3$0^{\circ}C$ to 25$0^{\circ}C$, the adsorption capacity of base activated carbon decreased sharply with increasing temperature but that of TEDA-impregnated activated carbon showed higher value even at high temperature ranges. Especially, the residual amount of methyl iodide after desorption on TEDA-AC represented 30% lower value than that on AgX-10. However, it can be used as an adsorbent for the removal of methyl iodide up to 15$0^{\circ}C$ if it is preventing explosion by Ignition. The breakthrough curves of methyl iodide in the fixed bed packed with AgX-10 uP to 40$0^{\circ}C$ were compared upon the effects of bed temperatures, bed depth and input concentration of methyl iodide. Removal mechanism of methyl iodide on AgX-10 was proposed, based on the analysis of by-product gas generated from adsorption reaction.

• Journal of Chest Surgery
• /
• v.46 no.5
• /
• pp.340-345
• /
• 2013

Background: This study aims to evaluate whether or not the method of right vertical axillary minithoracotomy (RVAM) is preferable to and as reliable as conventional sternotomy surgery, and also assesses its cosmetic results. Methods: Thirty-three patients (7 males, 26 females) with atrial septal defect were admitted to the Cardiovascular Surgery Clinic of Cukurova University from December 2005 until January 2010. The patients' ages ranged from 3 to 22. Patients who underwent vertical axillary minithracotomy were assigned to group I, and those undergoing conventional sternotomy, to group II. Group I and group II were compared with regard to the preoperative, perioperative and postoperative variables. Group I included 12 females and 4 males with an average age of $16.5{\pm}9.7$. Group II comprised 14 female and 3 male patients with an average age of $18.5{\pm}9.8$ showing similar features and pathologies. The cases were in Class I-II according to the New York Heart Association (NYHA) Classification, and patients with other cardiac and systemic problems were not included in the study. The ratio of the systemic blood flow to the pulmonary blood flow (Qp/Qs) was $1.8{\pm}0.2$. The average pulmonary artery pressure was $35{\pm}10$ mmHg. Following the diagnosis, performing elective surgery was planned. Results: No significant difference was detected in the average time of the patients' extraportal circulation, cross-clamp and surgery (p>0.05). In the early postoperative period of the cases, the duration of mechanical ventilator support, the drainage volume in the first 24 hours, and the hospitalization time in the intensive care unit were similar (p>0.05). Postoperative pains were evaluated together with narcotic analgesics taken intravenously or orally. While 7 cases (43.7%) in group I needed postoperative analgesics, 12 cases (70.6%) in group II needed them. No mortality or major morbidity has occurred in the patients. The incision style and sizes in all of the patients undergoing RVAM were preserved as they were at the beginning. Furthermore, the patients of group I were mobilized more quickly than the patients of group II. The patients of group I were quite pleased with the psychological and cosmetic results. No residual defects have been found in the early postoperative period and after the end of the follow-up periods. All of the patients achieved functional capacity per NYHA. No deformation of breast growth has been detected during 18 months of follow-up for the group I patients, who underwent RVAM. Conclusion: To conclude, the repair of atrial septal defect by RVAM, apart from the limited working zone for the surgeon in these pathologies as compared to sternotomymay be considered in terms of the outcomes, and early and late complications. And this has accounted for less need of analgesics and better cosmetic results in recent years.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.239-244
• /
• 2004

This study was carried out to clarify the effect of addition of mugwort and carcass grade on the quality and sensory properties of loin hams. The volatile basic nitrogen, 2-thiobarbituric acid reactive substances, total bacterial count, water holding capacity and calorie of loin hams were not significantly different among hams, but the pH and residual nitrite of loin hams with mugwort were significantly lower than that of loin hams without mugwort. The fat content of grade B loin hams were higher than that of grade E loin hams, and the protein and total amino acid content of grade E loin hams were higher than that of grade B loin hams. The free amino acid, saturated fatty acid and unsaturated fatty acid were not significantly different among loin hams. The $L^{＊}$ value of grade B loin hams were higher than that of grade E loin hams, the a value of grade E loin hams were higher than that of grade B loin hams, and the $b^{＊}$ value was not significantly different among loin hams. The hardness, springiness, cohesiveness, gumminess and chewiness were not significantly different among loin hams. The aroma of loin hams without mugwort were superior than that of loin hams with mugwort, and the juiciness of grade B loin hams were superior than that of grade E loin hams. But the color, taste, texture and palatability were not significantly different among loin hams.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.3
• /
• pp.41-49
• /
• 2013

The rotate penetration pile is a type of displacement pile: the surrounding soil is displaced when installing the pile, and the pile can exert a large bearing power and pullout force. In addition, it uses displaced soil method that does not generate slime, and its applications are increasing in foreign countries owing to the environmentally friendly characteristics such as small noise and vibration. However, mostly driven piles-which are directly driven to the ground, and bored pile- pre-fabricated piles are buried to prebored underground, are used; however, rotate penetration piles still have limited use. Most of the laboratory tests have been carried out until now to identify the support behavior after installation of piles and ground construction, the evaluating the support behavior is lacking due to the rotation intrusive process of the rotate penetration piles. Therefore, this study used indoor experiments simulating rotation intrusive process in weathered soil, to evaluate the bearing power behavior for the weathered soil, varying the diameter of the helical bearing plates, helical bearing plate spacing, number of the helical bearing plates, and helical bearing plate specifications. As the outcome of this study, the helical pile bearing power evaluation results, change in bearing power in accordance with main specifications, and review on the comparative analysis with the existing theories were provided.

• Journal of Aquaculture
• /
• v.19 no.3
• /
• pp.166-172
• /
• 2006

Induced androgenesis, a form of artificial parthenogenesis is an important tool for the generation and use of genetically isogenic or clonal fish strain. An optimized protocol for the genetic inactivation of mud loach (Misgurnus mizolepis) oocytes (i.e. production of androgenetic haploid) was developed using UV-irradiation. Various dose levels of UV significantly affected the fertilizing capacity of the eggs, hatchability of embryos and incidence of haploidy. Based on the extensive examinations of treatment conditions on embryo viability and haploid incidence, the optimum dose level of UV irradiation was turned out to be $10,800ergs/mm^2$ with 56.9% of hatching success and 94.6% of haploidy. The overall yield of putative androgen under optimized treatment condition was more than 50% out of total eggs inseminated. The success of androgenetic reproduction of haploid genome was verified by flow cytometry and PCR amplification of transgene that is exclusive to either one of parental sexes. However, a small portion $(8\sim11%)$ of presumed androgenetic haploid larvae was proven to contain residual DNA fragment(s) from maternal parent.

• Journal of Korean Society on Water Environment
• /
• v.31 no.5
• /
• pp.523-532
• /
• 2015

Hydrocyclone is widely used in industry, for its simple design, high capacity, low maintenance and low operational cost. The objective of this study is to develop hydrocyclone coagulation and filtration system. The system is made of hydrocyclone ballasted coagulation with polyaluminium chloride silicate (PACS) and upflow filter to treat micro particles in urban storm runoff. Roadside sediment particles (< $200{\mu}m$) was mixed with tap water to make various turbid suspensions to simulate urban storm runoff. The filter cartridge was filled with polyethylene media system and ran 1hr per everyday and total operation time were 8.19hrs and backwashing everyday after end of operation. The operation condition of flowrate was $8.2{\sim}11.9m^3/day$ (mean $10.1m^3/day$) and surface overflow rate (SOR) based on filter surface area was $45.5{\sim}65.9m^3/m^2/day$ (mean $55.7m^3/m^2/day$). The range of PACS dosage concentration was 14.0~31.5 mg/L. As the results of operation, the range of removal efficiency of turbidity, SS were 81.0~95.8% (mean 89.5%) 81.8~99.0% (mean 91.4%), respectively. An increase of filtration basin retention time brought on increased of removal efficiency of turbidity and SS, and increase of SOR brought on decreased of removal efficiency. During the first flush in urban area, storm runoff have an high concentration of SS (200~600 mg/L) and the filtration bed becomes clogged and decreased of removal efficiency. Backwashing begins when the drainage pipe valve at the filtration tank bottom is completely open (backwashing stage 1). Backwashing stage 2 was using air bubbles and water jet washing the media for 5 mins and open the drainage valve. After backwashing stage 1, 2, 61.83~64.04%, 18.53~27.51% of SS loading was discharged from filtration tank, respectively. Discharged SS loading from effluent was 7.12~14.79% and the range of residual SS loading in fliter was 2.26~5.00%. The backwashing effects for turbidity, SS were 89.5%, 91.4%, respectively. The hydrocyclone coagulation and filtration with backwashing system, which came out to solve the problems of the costly exchange filter media, and low efficiency of removing micro particles of filter type nonpoint treatment devices, is considered as an alternative system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.369-385
• /
• 1996

The eco-hydrodynamic model was used to estimate the primary productivity of the oyster culture grounds in Kamak Bay. It is composed of the three-dimensional hydrodynamic model for the simulation of water flow and ecosystem model for the simulation of phytoplankton. The ecosystem model was applied to simulate phytoplankton biomass during culturing period in condition of no oyster culture grounds. The field surveys were conducted from May, 1994 to March, 1995 in Kamak bay. The results showed the concentration of chlorophyll $\alpha$ to be $1.00\~23.28\;{\mu}g/l$ in the surface layer, $1.27\~29.97\;{\mu}g/l$ in the middle layer and $1.23\~23.08\;{\mu}g/l$ the bottom layer. In monthly variations of chlorophyll $\alpha$ concentration, very high concentration were found in July, 1994 and very low concentrations in December, 1994. As the results of three-dimensional hydrodynamic simulation, the computed tidal currents ave mainly toward the inner part of bay through Yeosu Harbor and the southern mouth of a bay during the flood tide. The computed residual currents were dominated southward in Yeosu Harbor and eastward in the mouth of bay and also showed strong clockwise water circulation at the mouth of bay. The pattern between the simulated and observed tidal ellipses at three stations was very similar. The mean relative errors of all levels between the simulated and observed phytoplankton biomass at 14 stations in Kamak Bay were $13.81\%,\;9.31\%\;and\;17.84\%$, respectively. The results of phytoplankton biomass simulation showed that the biomass increased from June to September and rapidly decreased to December and then slowly increased to March. Primary productivity was estimated in the range of $0.99\~10.20gC/m^2/d$ with the average value of $4.43gC/m^2/d$ in condition of no oyster culture grounds. Primary productivity was rapidly increased from lune to August and rapidly decreased to December and then slowly increased from January to March in Kamak Bay.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.1-12
• /
• 2004

Due to the 1989 Loma Prieta, 1995 Hyogoken Nambu earthquakes, etc, a number of bridge columns  were collapsed in flexure-shear failures as a consequence of the premature termination of the column longitudinal reinforcement. Nevertheless, previous researches for the performance of bridge columns were concentrated on the flexural failure mode. It is well understood that the seismic behaviour of RC bridge piers was dependent on the performance of the plastic hinge of RC bridge piers, the ductility of which was desirable to be computed on the basis of the curvature. Experimental investigation was made to evaluate the variation of the curvature of the plastic hinge  region for the seismic performance of earthquake-damaged RC columns in flexure-shear failure mode. Seven test specimens in the aspect ratio of 2.5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading under a constant axial load, $P=0.1f_{ck}A_g$. Residual seismic capacity of damaged specimens was evaluated by analzying the moment-curvature hysteresis and the curvature ductility. Test results show that the biggest curvature was developed around 15cm above the footing, which induced the column failure. It was observed that RC bridge specimens with lap-spliced longitudinal steels appeared to fail at low curvature ductility but significant improvement was made in the curvature ductility of RC specimens with FRP straps wrapped around the plastic hinge region. Based on the experimental variation of the curvature of RC specimens, new equivalent length of the plastic hinge region was proposed by considering the lateral confinement in this study. The analytical and experimental relationship between the displacement and the curvature ductility were compared based on this proposal, which gave excellent result.