• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.66-76
• /
• 2019

Recently, natural disasters such as floods and droughts are frequently occurred due to climate change and the damage is also increasing. Wetland is known to play an important role in reducing and minimizing the damage. In particular, water level variability needs to be analyzed in order to understand the various functions of wetland as well as the reduction of damage caused by natural disaster. Therefore, in this study, we fitted water level series of Upo wetland in Changnyeong, Gyeongnam province to a proper time series model and residual test was performed to confirm the appropriateness of the model. In other words, ARIMA model was constructed and its residual tests were performed using existing nonparametric statistics, BDS statistic, and Close Returns Histogram(CRH). The results of residual tests were compared and especially, we showed the applicability of CRH to analyze the residuals of time series model. As a result, CRH produced not only accurate randomness test result, but also produced result in a simple calculation process compared to the other methods. Therefore, we have shown that CRH and BDS statistic can be effective tools for analyzing residual in time series model.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.381-389
• /
• 2000

Metal matrix composite(MMCs) have been rapidly becoming one of the strongest candidates for structural materials for high temperature application. It is well recognized that MMCs always experience at least one large cool-down from processing temperature before my significant applied service loading. Due to the large difference in thermal expansion coefficient between the fiber and matrix, large thermal residual stresses generally develop in composites. It was reported from many previous studies that the effects of thermal residual stress on mechanical properties and fracture behavior were much more complex and dramatic than conventional engineering materials. Therefore it is crucial to evaluate the effect of heat treatment which changes the characteristic of distribution of thermal residual stress in MMCs. Single fiber composite(SFC) test based on the balance in a micromechanical model is a quite convenient method to evaluate interfacial shear strength(IFSS) and the failure mode of composite. In this study the effect of heat treatment on IFSS and the microscopic failure mechanism of MMC is investigated by combining acoustic emission(AE) technique with SFC test. The characteristic of AE signal, IFSS and microscopic failure mechanism due to heat treatment condition is discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1098-1105
• /
• 2009

In this paper, we propose an asynchronous UWB (Ultra Wide Band) Positioning scheme that can provide precise positioning performance with low complexity and low power consumption. We also present the residual test to improve the positioning performance in multipath channels having heavy NLoS (Non-Line of Sight) components. As compared to conventional ToA (Time of Arrival) positioning scheme that requires round-trip transmissions as many as the number of beacons, the proposed UWB positioning scheme effectively decrease power consumption and processing delay since a single round-trip transmission is only required. Also, as compared to conventional TDoA (Time Difference of Arrival) positioning scheme requiring precise synchronization among the beacons, asynchronous nature of the proposed scheme achieves very low system complexity. Through simulations in LoS (Line of Sight) channel models, we observe that the proposed scheme requires low system complexity, low power consumption, while providing positioning performance of almost the same accuracy as the conventional ToA and TDoA positioning schemes. In addition, the proposed scheme by employing the residual test achieves accurate positioning performance even in multipath channels having heavy NLoS components.

• Journal of Welding and Joining
• /
• v.11 no.4
• /
• pp.91-102
• /
• 1993

The plasma sprayed $Cr_3C_2$-NiCr coatings are widely used as wear-resistant and corrosion-resistant materials. The mechanical and wear properties of the plasma sprayed $Cr_3C_2$-NiCr coating on steel plate were examined in this study. The pore in the coatings could be classified into two types, the one is the intrinsic pore originated from the spraying powder, the other is the extrinsic pore formed during spraying. During the tensile adhesion test, the fracture occured at the interface of top coating and bond coating. It is though that the compressive residual stress increases with the increase of the top coating thickness. From the wear test, it was found that the wear rate increased with the increase of the sliding velocity regardless of the temperature. It is thought that the fracture toughness reduces with the increase of the sliding velocity at $30^{\circ}C$ and that the adhesion amount increases with the increase of the sliding velocity at $400^{\circ}C$ It is concluded that the wear mechanism at $30^{\circ}C$ is the fracture and pull-out of the carbide particles due to the fatigue on sliding surface, while the wear mechanism at $400^{\circ}C$ is the adhesion of the smeared layer formed during wear process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.3
• /
• pp.337-343
• /
• 1986

To clarify the existing serological varieties of Leptospira interrogans in Korea, 15 isolates of 1985 were serologically studied by cross agglutinin adsorption test. Fourteen cultures except HS 7 belonged to serogroup Icterohemorrhagiae. Isolate HM 3 and HV 8 were considered to belong to serotype mwogolo by their low residual homologous antibody(0.08 to 6.25%) after cross adsorption with serotype mwogolo referene culture and antiserum. Both residual homologous antibody of isolate HS 7 and serotype canicola reference culture remained 1.56%, accordingly HS 7 proved to belong to serotype canicola. The agglutinogens of isolate HY2, AP3, AP4, AP7 and AP9 are considered to closely related to serotype mwogolo, and HM4 and HS6 to serotype birkini, which remained to be further studied. The remaining 5 strains(HY1, HS5, HY10, 310-9, 310-19) could not be attached to any known serotype of Icterohemorrhagiae serogroup by cross adsorption test.

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.407-414
• /
• 2000

Carroll and Ruppert(1988) analyzed the esterase assay data with regression model based on quasi-likelihood. Jung and Lee(1997) introduced a goodness-of-fit test for testing the adequacy of the quasi-likelihood and claimed that there is no gross inadequacy with the model because their test was not rejected. However, Lee and Xelder(199S)'s residual plots revealed that the model did not sufficiently reflect the increase of the variance with that of the mean. In this paper, we re-analyze the esterase assay data with the joint modelling of mean and dispersion in Lee and l\elder(1998) and evaluate the validity of the fitted model by applying the residual plots. And it is illustrated that Lee and Nelder(199S)'s restricted likelihood is more efficient in goodness-of-fit test for the dispersion model.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.9-16
• /
• 2005

The purpose of this study is to investigate the settlement characteristics of large drilled shafts embedded into bed rocks. To perform this research, 35 pile load test results for the large drilled shafts are used, because these deep foundations generally used as substructure systems for grand bridges. In case of the yield load can not be easily determined by load(P)-settlement(S) curve from the pile load test at the maximum loads, the standard settlements which can determine a yield load is established. The residual settlement equation of pile embedded in gneiss and igneous rocks is presented in this study. Also a equation is proposed to characterize the relationship between loads and elastic settlements in pile load tests on the large drilled shaft embedded into bedrock. Then, large drilled shaft's settlement characteristics are examined on pile length, pile diameter and pile's socked depth into rock at the pile tip.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.2
• /
• pp.155-168
• /
• 1984

Field test were conducted to select the best method for soil phosphorus test and to obtain the critical levels of each method for P fertilizer recommendations based on tobacco production. Truog method was recognized to be the mort suitable one for soil P test. N. Carolina, Bray No.1 and Olsen methods were followed in order. Bray No. 2 and Lancaster methods showed the least satisfaction. The critical levels of available P by lancaster, Bray No. 1, N. Carolina,01sen, and Truog methods were 55ppm, 32ppm, 21ppm, 19ppm, and 22ppm, respectively. Below the critical level a large yield response can be expected with 10kg $P_2O_5$/10a, above critical level little or no response is expected. In soils the more the initial available p, the more available P was carried over, while the more the total amount of silt and clay, the less the residual P was found. The increase in residual P by 10kg of $P_2O_5$ was greater than that of 5kg/10a. The chemical composition and the price of the cured leaf were not affected by the $P_2O_5$ application, indicating that the increase in the rate of $P_2O_5$ application would not exert on the quality of tobacco.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.4
• /
• pp.491-497
• /
• 2009

The purpose of this study is to propose a method of controlling redtide microbes which grow abundantly and form harmful algal bloom in eutrophic waterbody with yellow loess and hydrogen peroxide. In the laboratory test, hydrogen peroxide was applied to single species of C. polykrikoides and multispecies of redtide microbes. The seawater was evaluated by the pre-test analysis including chlorophyll-a, luminance and transmittance. The test results showed that both single and mixed species of redtide microbes could be controlled with the dose of 30mg $H_2O_2/L$. Residual hydrogen peroxide was completely decomposed with the addition of powdered yellow loess at 2g/L~10g/L. However, the decomposition rate of residual hydrogen peroxide for sintered granular yellow loess was relatively low compared to the use of powdered one. With the addition of dissolved oxygen concentration was increased at a rate of 0.013 mg DO/mg $H_2O_2$, which is a little lower than the one predicted theoretically. No evidence for any detrimental effects on Artemia, a type of brine shrimps, was shown up to the concentration of 100mg $H_2O_2/L$.