• 한국간호교육학회지
• /
• 제8권1호
• /
• pp.61-71
• /
• 2002

purpose : The purpose of this study was to find out the influencing factors of smoking-cessation behavior of patients with coronary heart disease and to suggest the model of smoking-cessation behavior which was based on the relationship between influencing factors and then to test its fitness empirically. method : This study was based on the Theory of Reasoned Action and a hypothetical model was constructed with fifteen paths in consideration of main predictive factors of smoking-cessation behavior such as biological factor, disease-related characteristics, self-efficacy, supportive factor, environmental factor, disease-related perception factor, intention-to-quit, and psychological factor. The validity of a smoking- cessation model was tested to 264 patients with coronary heart disease by using SPSS 8.0 and Window LISREL 8.12a. results : 1. Seven of the 15 paths of smoking-cessation behavior proved to be significant. 2. The final model excluded three paths in the hypothetical model was demonstrated to be improved by $x^2$=44.31 (df=38, p=.22), Goodness of Fit Index (GFI)=.98, Adjusted Goodness of Fit Index (AGFI)=.96, Non-Normed Fit Index(NNFI)=1.00, Normed Fit Index(NFI)=1.00, and Root Mean Square Residual(RMR)=.24. 3.The smoking-cessation behavior was influenced directly by biological factor, self-efficacy, supportive factor, environmental factor, intention-to-quit, and psychological factor. The smoking-cessation behavior was accounted for 82% of variance by these factors. conclusion : although the adolescents' smoking behavior can be predicted by only smoking intention, it is hard to predict the adults' smoking-cessation behavior by only this factor. Therefore, intention-to-quit, self-efficacy, supportive factor should be improved because these are promotive factors for smoking-cessation behavior. Biological factor, environmental factor, and psychological factor are inhibitive factors, so nicotine replacement therapy is helpful to the high nicotine-dependents, and ex-smokers avoid other smokers in their environment and also patients should learn and practice the stress coping-skills.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.100-114
• /
• 2015

This paper deploys optimization techniques to obtain the optimum hull form of KSUEZMAX at the conditions of full-load draft and design speed. The processes have been carried out using a RaPID-HOP program. The bow and the stern hull-forms are optimized separately without altering neither, and the resulting versions of the two are then combined. Objective functions are the minimum values of wave-making and viscous pressure resistance coefficients for the bow and stern. Parametric modification functions for the bow hull-form variation are SAC shape, section shape (U-V type, DLWL type), bulb shape (bulb height and size); and those for the stern are SAC and section shape (U-V type, DLWL type). WAVIS version 1.3 code is used for the potential and the viscous-flow solver. Prior to the optimization, a parametric study has been conducted to observe the effects of design parameters on the objective functions. SQP has been applied for the optimization algorithm. The model tests have been conducted at a towing tank to evaluate the resistance performance of the optimized hull-form. It has been noted that the optimized hull-form brings 2.4% and 6.8% reduction in total and residual resistance coefficients compared to those of the original hull-form. The propulsive efficiency increases by 2.0% and the delivered power is reduced 3.7%, whereas the propeller rotating speed increases slightly by 0.41 rpm.

• 한국축산식품학회지
• /
• 제33권2호
• /
• pp.198-204
• /
• 2013

This study aimed to apply the Parallux system to detect (fluoro)quinone antibiotics residues in raw bovine milk. The immunogen enabled the generation of a specific antiserum with a titer of 1/40,000. The $Parallax^{TM}$ kit using the antibody displayed $IC_{50}$ value of 10 to 150 ppb for (fluoro)quinolone antibiotics. $Parallax^{TM}$ kit was also sensitive for the detection of incurred (fluoro)quinolone at Korean Maximum Residual Levels in raw bovine milk as the result of dose response test. Cross reactivities of the antibody with the common (fluoro)quinolones were determined to be norfloxacin, 100%; enrofloxacin, 100%; ciprofloxacin, 100%; danofloxacin, 100%; nalidixic acid, 40%. Lower detection limit (LOD) values of the $Parallax^{TM}$ kit in raw bovine milk were determined to be norfloxacin, 4 ppb; enrofloxacin, 5 ppb; danofloxacin, 5 ppb; ciprofloxacin, 5 ppb and nalidixic acid, 10 ppb. The $Parallax^{TM}$ kit was run 8 times with five different concentrations of norfloxacin to determine the coefficient of variation (CV, %) of intra-assay, which was between 2.7% and 11.8%. To confirm the precision among kit batches for the inter-assay, five different batch kits were tested with 2 different concentration of norfloxacin. The CVs of the inter assay were 4.2% at 50 ppb, and 7.2% at 10 ppb norfloxacin, respectively.

• 한국축산식품학회지
• /
• 제36권6호
• /
• pp.769-778
• /
• 2016

In this study, we improved the eggshell-membrane separation process by separating the shell and membrane with EDTA solution, evaluating effects of three different extraction solutions (acetic acid, EDTA, and phosphate solution), and co-purifying multiple eggshell proteins with two successive ion-exchange chromatography procedures (CM Sepharose Fast Flow and DEAE Sepharose Fast Flow). The recovery and residual rates of eggshell and membrane separated by the modified method with added EDTA solution were 93.88%, 91.15% and 1.01%, 2.87%, respectively. Ovocleidin-116 (OC-116) and ovocalyxin-36 (OCX-36) were obtained by loading 50 mM Na-Hepes, pH 7.5, 2 mM DTT and 350 mM NaCl buffer onto the DEAE-FF column at a flow rate of 1 mL/min, ovocleidin-17 (OC-17) was obtained by loading 100 mM NaCl, 50 mM Tris, pH 8.0 on the CM-FF column at a flow rate of 0.5 mL/min. The purities of OCX-36, OC-17 and OC-116 were 96.82%, 80.15% and 73.22%, and the recovery rates were 55.27%, 53.38% and 36.34%, respectively. Antibacterial activity test suggested that phosphate solution extract exhibited significantly higher activity against the tested bacterial strains than the acetic acid or EDTA extract, probably due to more types of proteins in the extract. These results demonstrate that this separation method is feasible and efficient.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.253-259
• /
• 2015

The test equipment becomes more important with the development of semiconductor industry. MEMS probe is an important testing component to detect the defects from the generated electric signal when it contacts the metal pad of semiconductor devices. Ni-Pd alloy has been paid attention to as a candidate of MEMS probe material because of its high surface hardness and relatively low resistivity. In this study, electroplated Ni-Pd alloy has been prepared by using ethylene diamine as a complexing agent. Solid solution alloy coating could be formed when concentration of palladium chloride and current density were in the ranges of 1~5 mM and $0.2{\sim}1.5A/dm^2$, respectively. The increase of current density brought about an decrease in palladium content, which made both of lattice parameter and grain size smaller. As a result of grain refinement, high hardness could be obtained. However, surface cracking was observed due to residual stress when the current density was above $1.3A/dm^2$. When effects of heat treatment temperature on hardness and sheet resistance were investigated, the accompanied grain growth decreased both of them. The decrease of hardness remained stable at a temperature of $200^{\circ}C$. The sheet resistance was drastically reduced at $100^{\circ}C$. After that, it was found to become constant.

• Spatial Information Research
• /
• 제23권5호
• /
• pp.65-73
• /
• 2015

서울시는 강북의 노후화 및 강남과 강북의 경제 불균형을 해소하고자 뉴타운 사업을 시행하였고, 이에 따라 은평구는 시범지구로 지정되었으며 2013년 최종적으로 사업이 완료되었다. 이에 본 연구는 은평구에서 진행된 뉴타운 사업에 따라 발전된 사회적, 경제적 요소들이 지가에 미치는 영향의 정도를 공간 효과를 반영한 지리가중회귀모델을 이용하여 분석하였다. 분석결과 기존의 지가분석에서 주로 이용된 선형회귀모델에 비해 높은 설명력을 가지고 있었으며, AIC값과 잔차의 Moran'I를 통해 좀 더 적합한 모델로 판정하였다. 또한 지역적으로 회귀계수의 차이가 있었으며 부호가 다르게 나타나는 경우도 있어 선형회귀모델을 통한 전역적인 분석방법보다 자세한 설명이 가능해졌다. 추후 은평구 개발에 있어 공간적 특성을 고려하여 지역을 개발한다면 실효성 강화에 도움이 될 수 있을 것으로 판단된다.

• 콘크리트학회지
• /
• 제9권2호
• /
• pp.153-161
• /
• 1997

콘크리트가 외기에 노출되면 수분확산 현상으로 수분의 이동이 일어나고, 콘크리트 내부는 부등수분분포상태가 된다. 이러한 부등수분분포에 의하여 콘크리트 구조물에는 부등건조수축이 발생하며, 부등건조수축은 콘크리트 표면에 인장응력을 발생시키고, 표면균열의 원인이 되기도 한다. 또한 부등건조수축으로 인한 잔류응력은 현저한 크리이프의 영향을 받고, 이 때 각 위치에서 수분의 차이로 인하여 부등크리이프가 발생한다. 따라서 이 연구에서는 수분확산이론을 근거로 하여 콘크리트 내부의 수분분포를 합리적으로 예측할 수 있는 해석프로그램을 개발하였다. 그리고 콘크리트 내부의 각 위치에서 부등크리이프의 영향을 고려한 부등건조수축 해석방법을 제시하였다. 또한 콘크리트 내부의 각 위치에서의 부등건조수축 측정실험을 실시하여, 부등건조수축 해석방법의 타당성을 검증하였다.

• 대한간호학회지
• /
• 제50권4호
• /
• pp.554-570
• /
• 2020

Purpose: This study aimed to develop and test a structural equation model of health-related quality of life among older women following bilateral total knee replacement based on a literature review and Wilson and Cleary's model of health-related quality of life. Methods: One hundred ninety three women who were diagnosed with osteoarthritis, were older than 65 years, and were between 13 weeks and 12 months of having a bilateral total knee replacement were recruited from an outpatient clinic. Data were collected from July 2017 to April 2018 using a structured questionnaire and medical records. Data were analyzed using SPSS/WIN 22.0, AMOS 22.0, and Smart PLS 3.2.4. Results: The fitness of the hypothetical model was good, with coefficients of determination (R²) ranging between .28 and .75 and predictive relevance (Q²) between .26 and .73. The standardized root mean square residual of the model fit indices for the hypothetical model was .04; which explained 64.2% of physical and 62.5% of mental health-related quality of life. Self-efficacy, symptom status, functional status, and general health perceptions had a significant direct effect on physical health-related quality of life, while social support, symptom status, and general health perceptions had a significant direct effect on participants' mental-health-related quality of life. Conclusion: To improve the physical and mental quality of life of older women who receive bilateral knee replacement, nursing-based intervention strategies that reduce symptoms, improve functional status, and increase health perceptions, self-efficacy, and social support are needed. The most important factor is the symptom status.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.17-28
• /
• 2017

Although concrete is a noncombustible material, high temperatures such as those experienced during a fire have a negative effect on the mechanical properties. This paper studies the effect of elevated temperatures on the mechanical properties of limestone, quartzite and granite concrete. Samples from three different concrete mixes with limestone, quartzite and granite coarse aggregates were prepared. The test samples were subjected to temperatures ranging from 25 to $650^{\circ}C$ for a duration of 2 h. Mechanical properties of concrete including the compressive and tensile strength, modulus of elasticity, and ultimate strain in compression were obtained. Effects of temperature on resistance to degradation, thermal expansion and phase compositions of the aggregates were investigated. The results indicated that the mechanical properties of concrete are largely affected from elevated temperatures and the type of coarse aggregate used. The compressive and split tensile strength, and modulus of elasticity decreased with increasing temperature, while the ultimate strain in compression increased. Concrete made of granite coarse aggregate showed higher mechanical properties at all temperatures, followed by quartzite and limestone concretes. In addition to decomposition of cement paste, the imparity in thermal expansion behavior between cement paste and aggregates, and degradation and phase decomposition (and/or transition) of aggregates under high temperature were considered as main factors impacting the mechanical properties of concrete. The novelty of this research stems from the fact that three different aggregate types are comparatively evaluated, mechanisms are systemically analyzed, and empirical relationships are established to predict the residual compressive and tensile strength, elastic modulus, and ultimate compressive strain for concretes subjected to high temperatures.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.474-483
• /
• 2016

Accidental events such as collisions, groundings, and hydrocarbon explosions in marine structures can cause catastrophic damage. Thus, it is extremely important to predict the extent of such damage, which determines the total amount of oil spills and the residual hull girder strength. Punching fracture tests were conducted by Choung (2009b), where various sizes of indenters and circular unstiffened steel plates with different thicknesses were used to quasi-statically realize damage extents. A three-dimensional fracture strain surface was developed based on a reference (Choung et al., 2015b), where the average stress triaxiality and average normalized Lode angle were used as the parameters governing the fracture of ductile steels. In this study, new numerical analyses were performed using very fine axisymmetric elements in combination with an Abaqus user-subroutine to implement the three-dimensional fracture strain surface. Conventional numerical analyses were also conducted for the tests to identify the best fit fracture strain values by changing the fracture strains. Based on the phenomenon of the average normalized Lode angle starting out positive and then becoming slightly negative, it was inferred that the shear stress primarily dominates in determining the fractures locations, with a partial contribution from the compressive stress. It should be stated that the three-dimensional fracture surface effectively predicted at least the shear stress-dominant fracture behavior of a mild steel.