• 제목/요약/키워드: Residual Test

검색결과 1,816건 처리시간 0.027초

A Fast TU Size Decision Method for HEVC RQT Coding

  • Wu, Jinfu;Guo, Baolong;Yan, Yunyi;Hou, Jie;Zhao, Dan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권6호
    • /
    • pp.2271-2288
    • /
    • 2015
  • The emerging high efficiency video coding (HEVC) standard adopts the quadtree-structured transform unit (TU) in the residual quadtree (RQT) coding. Each TU allows to be split into four equal sub-TUs recursively. The RQT coding is performed for all the possible transform depth levels to achieve the highest coding efficiency, but it requires a very high computational complexity for HEVC encoders. In order to reduce the computational complexity requested by the RQT coding, in this paper, we propose a fast TU size decision method incorporating an adaptive maximum transform depth determination (AMTD) algorithm and a full check skipping - early termination (FCS-ET) algorithm. Because the optimal transform depth level is highly content-dependent, it is not necessary to perform the RQT coding at all transform depth levels. By the AMTD algorithm, the maximum transform depth level is determined for current treeblock to skip those transform depth levels rarely used by its spatially adjacent treeblocks. Additionally, the FCS-ET algorithm is introduced to exploit the correlations of transform depth level between four sub-CUs generated by one coding unit (CU) quadtree partitioning. Experimental results demonstrate that the proposed overall algorithm significantly reduces on average 21% computational complexity while maintaining almost the same rate distortion (RD) performance as the HEVC test model reference software, HM 13.0.

Microstructures and Mechanical Properties of Extruded Al 7050 Billet and Ring Forged One with Large Scale

  • Bae, Dong-Su;Joo, Kyung-Hwan;Lee, Jin-Kyung;Lee, Sang-Pill;Chang, Chang-Beom;Hong, Sung-Seop;Park, Tae-Won
    • 동력기계공학회지
    • /
    • 제20권6호
    • /
    • pp.40-45
    • /
    • 2016
  • The manufacturing process of large scaled Al 7050 alloy is difficult for the occurrence of solidification crack during casting. The aims of this study are the evaluations of microstructure and mechanical properties of extruded Al 7050 billet and ring forged one with large scale. Large scaled Al 7050 billet was casted by direct-chill casting process. The extruded and ring forged specimens were prepared from the casted ingot after residual stress relief and homogenization heat treatment, respectively. Microstructures, hardness and tensile test of the surface, middle and center part of each specimen were performed at room temperature. Sheared and elongated type grains were observed at the edge parts of surface and center area and its aspect ratios of grains were low and similar as 0.21 while that of middle area was closed to 0.92 value in ring forged Al 7050 alloy. The mechanical properties of extruded Al 7050 alloy were superior than those of ring forged one. The hardness values of surface and center part were slightly higher than that of middle part in ring forged Al 7050 alloy.

기온변화가 전력수요에 미치는 비선형적 영향: 부분선형모형을 이용한 추정과 예측 (Nonlinear impact of temperature change on electricity demand: estimation and prediction using partial linear model)

  • 박지원;서병선
    • 응용통계연구
    • /
    • 제32권5호
    • /
    • pp.703-720
    • /
    • 2019
  • 최근 빈번하게 발생하는 이상기온과 기후변화로 인하여 전력수요의 변동성이 커지고 있으며 기온 영향의 증가와 함께 기온변화에 대한 전력수요의 반응은 비선형성과 비대칭성으로 나타나고 있다. 정부 에너지 정책의 변화와 4차 산업혁명의 전개에 따라 기온 효과를 보다 정확하게 추정하고 예측하는 것은 안정적 전력수급 관리를 위하여 중요한 과제이다. 본 연구는 기온변화에 대한 전력수요의 비선형적 반응에 대하여 부분선형모형을 이용하여 분석하고자 한다. 기온변화와 전력수요의 비선형·비대칭적 관계를 측정하기 위하여 Robinson의 double residual 준모수적 추정과 스플라인 추정을 적용하였다. 기상변수와 전력 소비에 대한 시간 단위 고주기 자료를 사용하여 부분선형모형으로 추정한 기온변화와 전력 소비의 관계는 기존 모수적 모형과는 다른 비선형성과 비대칭성을 갖고 있음을 확인하였다. 부분선형모형을 이용하여 얻은 전력수요에 대한 표본내·표본외 예측은 이차함수 모형과 냉난방도일 모형과 비교하여 우수한 예측력을 보였다. Diebold-Mariano 검정결과, 부분선형모형에서 얻은 예측력 향상은 통계적으로 유의하였다.

토양내 총 NAPL과 공기접촉 NAPL의 측정을 위한 분별 NAPL 분배 추적자 기술의 개발

  • 최경민;김헌기
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
    • /
    • pp.29-32
    • /
    • 2004
  • Gaseous partitioning tracer test has been used for determining the volume and spatial distribution of residual non-aqueous phase liquid (NAPL) in the unsaturated soils. In this study, an experimental method for measuring the content of gas-exposed NAPL as well as that of total NAPL in a sand during air sparging was developed. Two different gaseous phase NAPL-partitioning tracers were used; n-pentane, with very low water solubility, was used as the tracer that partitions into NAPL that is only in contact with the mobile gas, and chloroform, with fairly good water solubility, was selected for detecting total NAPL content in the sand. Helium and difluromethanewere used as the non- reactive tracer and water-partitioning tracers, respectively. Using n-decane as a model NAPL (NAPL saturation of 0.018), 25.6% of total NAPL was detected by n-pentane at the water saturation of 0.68. Oniy 9.1% of total NAPL was detected by n-pentane at the water saturation of 0.84. This result implies that the quantity of gas-exposed NAPL increased about three times when the water saturation decreased from 0.84 to 0.68. At the water saturation of 0.68, more than 90% of total NAPL was detected by chloroform while 65.8% of total NAPL was detected by chloroform at the water saturation of 0.84. Considering that the removal rate of NAPL during air sparging for NAPL-contaminated aquifer is expected to be greatly dependent upon the spatial arrangement of NAPL phase with respect to the mobile gas, this new approach may provide useful information for investigating the mass transfer process during air-driven remedial processes fer NAPL-contaminated subsurface environment.

  • PDF

정수지의 형상과 유입 유량이 T10에 미치는 영향 연구 (Effect of Shape and Flow Rate on T10 in Clearwell)

  • 신은허;김성훈;박희경;안재찬;최재호;최영준
    • 상하수도학회지
    • /
    • 제19권6호
    • /
    • pp.819-826
    • /
    • 2005
  • To guarantee the disinfection ability in clearwell, a value of CT is considered where C[mg/l] is disinfectant residual at the exit of clearwell and T[min] means $T_{10}$, the contact time when 10% of tracer is out of clearwell after introducing the tracer at the inlet. To meet a CT value required, increasing the C value is not recommended because high C value can increase potential of producing disinfection by product like THMs. Increasing the hydraulic efficiency surrogated by $T_{10}$ is thus an option widely recommended. Right now, it is widely adopted estimating $T_{10}$ considering LW ratio only due to the suggestions of previous researches. The authors think however there are other factors to consider including shape, flow rate, configuration of inlet and outlet, and the existence of intra basin. This study is initiated to closely look at the effects of two factor on hydraulic efficiency. The factors are shape and inlet flow velocity, i.e., inflow. For that, computational fluid dynamics (CFD) model is developed and pilot test is also carried out. The results show that at a L/W ratio, disinfection ability is overestimated with larger length in shape and higher inlet flow velocity. This suggests that in determining $T_{10}$, the shapes of clearwell and inlet flow velocity should also be considered as well as L/W ratio.

주기하중을 받는 세장한 철근콘크리트 보의 길이방향 인장변형 (Longitudinal Elongation of Slender Reinforced Concrete Beams Subjected to Cyclic Loading)

  • 엄태성;박홍근
    • 콘크리트학회논문집
    • /
    • 제20권6호
    • /
    • pp.785-796
    • /
    • 2008
  • 휨항복 이후 주기하중을 받는 철근콘크리트 부재에서는 길이방향의 인장변형이 발생된다. 이러한 길이방향 인장변형은 철근콘크리트 보의 강도 및 변형능력을 저하시킬 수 있다. 본 연구에서는 비선형 트러스 모델 해석을 통하여 철근콘크리트 보에 발생되는 길이방향 인장변형의 메커니즘을 분석하였다. 그 결과, 길이방향 인장변형은 소성힌지에서의 길이방향 철근에 발생되는 잔류 인장 소성변형으로 인하여 발생되고, 대각 콘크리트 스트럿의 전단력 전달 메커니즘이 길이방향 인장변형의 크기에 중요한 영향을 미치는 것으로 나타났다. 이러한 분석결과를 토대로 주기거동 동안 철근콘크리트 보에 누적되는 길이방향 인장변형을 평가할 수 있는 간단한 평가식을 제안하였다, 제안된 방법은 다양한 설계변수 및 재하이력을 갖는 보 실험체에 적용되었다.

Effect of steel fiber volume fraction and aspect ratio type on the mechanical properties of SIFCON-based HPFRCC

  • Kim, Seugnwon;Jung, Haekook;Kim, Yongjae;Park, Cheolwoo
    • Structural Engineering and Mechanics
    • /
    • 제65권2호
    • /
    • pp.163-171
    • /
    • 2018
  • Plain concrete is a brittle material with a very low tensile strength compared to compressive strength and critical tensile strain. This study analyzed the dynamic characteristics of high-performance fiber-reinforced cementitious composites based on slurry-infiltrated fiber concrete (SIFCON-based HPFRCC), which maximizes the steel-fiber volume fraction and uses high-strength mortar to increase resistance to loads, such as explosion and impact, with a very short acting time. For major experimental variables, three levels of fiber aspect ratio and five levels of fiber volume fraction between 6.0% and 8.0% were considered, and the flexural strength and toughness characteristics were analyzed according to these variables. Furthermore, three levels of the aspect ratio of used steel fibers were considered. The highest flexural strength of 65.0 MPa was shown at the fiber aspect ratio of 80 and the fiber volume fraction of 7.0%, and the flexural strength and toughness increased proportionally to the fiber volume fraction. The test results according to fiber aspect ratio and fiber volume fraction revealed that after the initial crack, the load of the SIFCON-based HPFRCC continuously increased because of the high fiber volume fraction. In addition, sufficient residual strength was achieved after the maximum strength; this achievement will bring about positive effects on the brittle fracture of structures when an unexpected load, such as explosion or impact, is applied.

Genetic Relationship between Ultrasonic and Carcass Measurements for Meat Qualities in Korean Steers

  • Lee, D.H.;Kim, H.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권1호
    • /
    • pp.7-12
    • /
    • 2004
  • Real time ultrasonic measurements for 13th rib fat thickness (LBF), longissimus muscle area (LEMA) and marbling score (LMS) of live animal at pre-harvest and subsequent carcass measurements for fat thickness (BF), longissimus muscle area (EMA), marbling score (MS) as well as body weight of live animal, carcass weight (CW), dressing percentage (DP), and total merit index (TMI) on 755 Korean beef steers were analyzed to estimate genetic parameters. Data were analyzed using multivariate animal models with an EM-REML algorithm. Models included fixed effects for year-season of birth, location of birth, test station, age of dam, linear and quadratic covariates for age or body weight at slaughter and random animal and residual effects. The heritability estimates for LEMA, LBF and LMS on RTU scans were 0.17, 0.41 and 0.55 in the age-adjusted model (Model 1) and 0.20, 0.52 and 0.55 in the weight-adjusted model (Model 2), respectively. The Heritability estimates for subsequent traits on carcass measures were 0.20, 0.38 and 0.54 in Model 1 and 0.23, 0.46 and 0.55 in Model 2, respectively. Genetic correlation estimate between LEMA and EMA was 0.81 and 0.79 in Model 1 and Model 2, respectively. Genetic correlation estimate between LBF and BF were high as 0.97 in Model 1 and 0.98 in Model 2. Real time ultrasonic marbling score were highly genetically correlated to carcass MS of 0.89 in Model 1 and 0.92 in Model 2. These results indicate that RTU scans would be alterative to carcass measurement for genetic evaluation of meat quality in a designed progeny-testing program in Korean beef cattle.

동맥경화증 위험요인들간의 인과관계에 대한 구조모형 구축 (Development of Structural Equation Model for Causal Relationships Among the Risk Factors of Arteriosclerosis)

  • 오현수;서화숙
    • 대한간호학회지
    • /
    • 제29권6호
    • /
    • pp.1192-1207
    • /
    • 1999
  • The purpose of this study was to clarify the dynamic relationships among risk factors of arteriosclerosis and to develop and examine a model which could explain this relationship clearly. Data were collected from medical records of 400 male clients who visited a university hospital located in Inchon for physical examinations, from May 1996 to December 1996. Data were analyzed using the LISREL (Linear Structural Relationship) 8 program. To test the fitness of the hypothesized model, chi-square, RMSR (root mean square residual), GFI (goodness of fit index), CN (critical number) and Q-plot were used. Most of the fitness measurements, except the chi-square showed that the hypothesized model complimented the real data. According to the results, there were trends that obesity and hyperlipidemia were prevalent in heavier smokers, higher alcohol intakers, and groups who excercised less. Also, hypertension was more prevalent in older age, higher alcohol intaker, and higher serum lipid level groups. In contrast to the hypothesis, alcohol intake did not significantly affect serum lipid levels. This might be due to the serum lipid measurements (total cholesterol and trigryceride) used in this study to estimate hyperlipidemia. The direct effect of smoking on hypertension was not significant. However, the total effect of smoking on the hypertension was significant since indirect effects of smoking on hypertension, such as obesity and hyperlipidemia, were significant. The total effect of obesity on hypertension was significant since the indirect effect of obesity on hypertension via hyperlipidemia was significant, although the direct effect of smoking on hypertension was not significant. The degree of explaining hyperlipidemia with smoking, exercise, and obesity was high (60%), however, the degree of explaining obesity with age, smoking, alcohol intake, and exercise was very low (7%). On the basis of these results, high risk factors of arteriosclerosis such as hypertension, hyperlipidemia, or obesity are either directly or indirectly correlated each other. Therefore, it is difficult to predict outcomes for increasing or decreasing the risk factors by simply modulating a factor. Smoking, alcohol, and exercise both directly and indirectly affected major risk factors of arteriosclerosis. Therefore, correcting these variables is required to decrease risk factors. Finally, the relationship among other risk factors which have been known to be related with arteriosclerosis (diet, stress or hereditary) should be clarified in further studies.

  • PDF

Bacillus polyfermenticus SCD의 항산화 및 콜레스테롤 저하효과 (Antioxidative and Cholesterol-reducing Activity of Bacillus polyfermenticus SCD)

  • 정황영;김태훈;박준석;김기태;백현동
    • KSBB Journal
    • /
    • 제18권5호
    • /
    • pp.371-376
    • /
    • 2003
  • 프로바이오틱 생균인 B. polyfermenticus SCD의 유용성을 확인하기 위해 항산화 및 콜레스테롤 저하 효과를 검증하였다. DPPH법에 의한 항산화 활성은 48% 정도였으며, TCA법에 의한 활성은 45%로 측정되었다. 그리고 TBARS 법에 의해 측정된 활성은 stimulator가 존재할 때 60%에 달하였으며, SOD 유사활성은 15% 정도였다. 이러한 활성은 기존의 항산화제인 BHT나 $\alpha$-tocopherol의 1% 용액과 비교할 때, 비슷하거나 약간 낮은 수치를 보여 준다. 향후 항산화 물질이 정제되어 이 물질의 1% 용액과 1% 농도의 기존 항산화제의 활성을 비교하여야 한다. 그러나 이 같은 뚜렷한 B. polyfermenticus SCD의 항산화력을 바탕으로 천연 항산화제 개발이 가능하다고 판단된다. 한편 B. polyfermenticus SCD의 콜레스테롤 저하 효과는 0.3% oxgall이 존재할 때, 64% 정도였다. 이 수치는 oxgall이 존재하지 않을 때 수치(67%)와 비교할 때, 큰 변화가 없었다. 그리고 콜레스테롤 저하 기작은 세포내 흡착에 의한 것으로 판단되었다.