• 제목/요약/키워드: Residual Test

검색결과 1,816건 처리시간 0.026초

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

관상동맥우회술 환자에서의 심근관류점수제에 대한 연구: 완전혈관재생술의 평가 (Myocardial Perfusion Scoring System in Coronary Bypass Grafting - Estimation of Completeness -)

  • 채헌;백완기;안혁;김용진;노준량;김종환;서경필
    • Journal of Chest Surgery
    • /
    • 제24권9호
    • /
    • pp.881-889
    • /
    • 1991
  • The ideal goal of the coronary artery bypass surgery is complete revascularization. To estimate the numerical degree of completeness of revascularization, the following formula was used in 50 patients having aorta-coronary bypass grafting for the treatment of unstable angina. myocardial perfusion score of revascularized area Degree of Completeness = ----------------------------------------------------------------------------- x100[%] preoperative myocardial perfusion score Randomized patients who underwent revascularization procedures in 19Hb were compared with the patients who received similar elective operation each year from 1988 through 1991. To obtain these data, the patients aged 38 ~ 75[mean 54$\pm$9.1years], composed of 31 males and 19 females were randomly sampled. The number of grafts per patient increased from 2.30 in 1986, to 3.07 in 1988 - 89, to 3.21 in 1990, and to 3.50 in 1991. [0.05 The degree of completeness improved from 75.4% to 81.4%, 91.6% and 88.6% respectively. It improved significantly in the last two years, [P<0.05, Mann-Whitney U test] At a follow-up of three months, 90 percent[45/50] of patients remained angina, free, 6 percent[3/50] had residual angina, and 4 percent[2/50] died. The last two patients degree of completeness corresponded to 43% and 30% respectively As a conclusion, the degree of completeness seems to improve year by year, and to have close relationship with the clinical results.

  • PDF

극저하중(極低荷重)사이클을 받는 강부재(鋼部材) 및 요소(要素)의 파괴거동(破壞擧動)에 관한 실험적(實驗的) 연구(硏究) (Experimental Study on Failure Behavior of Steel Members and Elements under Very Low Load-Cycles)

  • 박연수
    • 대한토목학회논문집
    • /
    • 제14권2호
    • /
    • pp.257-268
    • /
    • 1994
  • 강진과 같은 큰 반복하중하에서 강부재 및 그들요소의 균열과 파단에 영향을 미치는 중요한 물리적 인자들을 찾아내어, 그 인자들간의 정량적인 관계를 규명하기 위해 실험적 연구를 수행하였다. 9개의 강판요소와 28개의 앵글 강부재를 시험체로서 사용하였으며, 비탄성 좌굴이 포함된 축방향의 반복하중을 5~20회 정도 받았다. 본 실험은 극저사이클 파괴거동에 있어서 제하이력과 파괴형태 및 단면형상의 영향평가에 특히 촛점을 두었다. 실험결과, 에너지 소산능력은 실험변수에 크게 의존하였으며, 균열의 발생 또는 파단과 에너지 소산능력 사이에 단순한 정량적 관계가 성립되지 않았다. 그러나, 실험변수에 관계없이 균열발생부에 있어서 잔류변형률의 최대치는 일정한 값을 보여주었다.

  • PDF

입계부식법에 의한 사용중인 화력발전소 요소의 잔여수명평가 (Assessment of Residual Life for In-Service Fossil Power Plant Components Using Grain Boundary Etching Method)

  • 한상인;윤기봉;정세희
    • 대한기계학회논문집A
    • /
    • 제21권1호
    • /
    • pp.22-31
    • /
    • 1997
  • The grain boundary etching method as a method for assessing degradation of structural materials has received much attention because it is simple, inexpensive and easy to apply to real components. In this study, the effectiveness of the method is verified by successfully applying the technique to in-service components of aged fossil power plants such as main steam pipes, boiler headers an turbine rotors. A new degradation parameter, intersecting number ratio (N$_{1}$/N$_{0}$), is employed. The intersecting number ratio (N$_{1}$/N$_{0}$) is defined as the ratio of intersection number (N$_{1}$) obtained from 5-minute picric acid etched surface to the number (N$_{0}$) obtained from nital etched surface. Two kinds of test materials, 2.25Cr-1Mo steel and 1Cr-1Mo-0.25V steel, were artificially thermal-aged at 630.deg. C in different levels of degradation., (N$_{1}$/N$_{0}$) were measured. And, correlations between the measured values and LMP values calculated from aging temperature and aging time were sought. To check the validity of the correlations obtained in laboratory, similar data were measured from service components in four old Korean fossil power plants. These on-site measurement data were in good correlation with those obtained in the laboratory.oratory.

Maternal and Direct Genetic Parameters for Production Traits and Maternal Correlations among Production and Feed Efficiency Traits in Duroc Pigs

  • Hoque, M.A.;Kadowaki, H.;Shibata, T.;Suzuki, K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제21권7호
    • /
    • pp.961-966
    • /
    • 2008
  • Direct and maternal genetic parameters for production traits in 1,642 pigs and maternal genetic correlations among production (1,642 pigs) and feed efficiency (380 boars) traits were estimated in 7 generations of a Duroc population. Traits studied were daily gain (DG), intramuscular fat (IMF), loineye area (LEA), backfat thickness (BF), daily feed intake (FI), feed conversion ratio (FCR) and residual feed intake (RFI). The RFI was calculated as the difference between actual and predicted feed intake. The predicted feed intake was estimated by adjusting the initial test weight, DG and BF. Data for production traits were analyzed using four alternative animal models (including direct, direct+maternal permanent environmental, or direct+maternal genetic+maternal permanent environmental effects). Direct heritability estimates from the model including direct and all maternal effects were $0.41{\pm}0.04$ for DG, $0.27{\pm}0.04$ for IMF, $0.52{\pm}0.06$ for LEA and $0.64{\pm}0.04$ for BF. Estimated maternal heritabilities ranged from $0.04{\pm}0.04$ to $0.15{\pm}0.05$ for production traits. Antagonistic relationships were observed between direct and maternal genetic effects ($r_{am}$) for LEA (-0.21). Maternal genetic correlations of feed efficiency traits with FI ($r_g$ of FI with FCR and RFI were $0.73{\pm}0.06$ and $0.90{\pm}0.05$, respectively) and LEA (rg of LEA with FCR and RFI were $-0.48{\pm}0.05$ to $-0.61{\pm}0.05$, respectively) were favorable. The estimated moderate genetic correlations between direct and maternal genetic effects for IMF and LEA indicated that maternal effects has an important role in these traits, and should be accounted for in the genetic evaluation system.

지진하중을 받는 철근콘크리트 접합부의 강도 (Strength of Reinforced Concrete Beam-Column Assembles Subjected to Seismic Loading)

  • 이정윤;채희대
    • 한국지진공학회논문집
    • /
    • 제10권5호
    • /
    • pp.25-33
    • /
    • 2006
  • 본 논문에서는 지진하중을 받는 내부 및 외부 철근콘크리트 보-기둥 접합부의 강도 및 연성능력을 평가하였다. 접합부에 인접한 보에 소성힌지가 발생한 이후 접합부가 파괴할 경우 접합부 내력은 보의 소성힌지의 영향을 받아 감소하게 된다. 보에 소성힌지가 발생하면 보의 부재축방향 변형률은 급격하게 증가하게 되며, 증가된 부재축방향 변형률은 접합부의 변형에 영향을 주어 접합부의 강도를 저감시킨다. 이 논문에서는 보에 소성힌지가 발생하기 이전에 파괴하는 접합부의 내력과 보에 소성힌지가 발생한 이후에 파괴하는 접합부의 연성능력을 접합부의 변형능력 및 스트럿의 강도저감을 이용하여 평가하였다. 제시한 평가법은 52개의 접합부 실험체를 이용하여 검증하였다.

화소 단위 예측에 의한 무손실 영상 부호화 (Lossless Video Coding Based on Pixel-wise Prediction)

  • 남정학;심동규;이영렬;오승준;안창범;박호종;서정일;강경옥
    • 대한전자공학회논문지SP
    • /
    • 제43권6호
    • /
    • pp.97-104
    • /
    • 2006
  • 최신 비디오 압축 표준인 H.264/AVC는 손실 압축을 근간으로 고안되었기 때문에 무손실 압축 방식에서는 최고의 효율을 얻을 수 없다. 본 논문에서는 H.264/AVC에 화소 단위의 예측을 적용한 두 가지 효과적인 인트라 무손실 부호화 방법을 제안한다 H.264/AVC의 인트라 후에 생성된 차분영상에 대해서 화소 단위 예측 방법과 기존의 인트라 예측 방법에 추가적인 인트라 예측 모드로서 화소 단위 예측 방법을 제안한다. 제안된 무손실 부호화 알고리즘은 대부분의 테스트 영상에서 기존의 H.264/AVC FRExt high profile과 비교하여 약 $12%{\sim}25%$ 정도 향상된 압축률을 얻을 수 있다.

Estimation of Strength Loss and Decay Severity of Juniperus procera by Juniper Pocket Rots Fungus, P. demidoffii in Ethiopian Forests

  • Assefa, Addisu
    • Journal of Forest and Environmental Science
    • /
    • 제36권2호
    • /
    • pp.143-155
    • /
    • 2020
  • A juniper pocket rot fungus, Pyrofomes demidoffii is a basidiomycetous fungus responsible for damage of living Juniperus spp. However, its effect on the residual strength and on the extent of decay of juniper's trunk was not determined in any prior studies. The purpose of this study was to study the features of J. procera infected by P. demdoffii, and to estimate the level of strength loss and decay severity in the trunk at D.B.H height using different five formulas. Infected juniper stands were examined in two Ethiopian forests through Visual Tree Assessment (VTA) followed by a slight destructive drilling of the trunk at D.B.H height. The decayed juniper tree is characterized by partially degraded lignin material at incipient stage of decay to completely degraded lignin material at final stage of decay. In the evaluated formulas, results of ANOVA showed that a significantly higher mean percentage of strength loss and decay severity were recorded in the trees of larger D.B.H categories (p<0.001). The strength loss formulas produced the same to similar patterns of sum of ranks of strength loss or decay severity in the trunk, but the differences varied significantly among D.B.H categories in Kruskal Wallis-test (p<0.001). In conclusion, the employed formulas showed similar to different degree of variability in quantification of strength loss or decay severity in the trunk. The findings of our study could be used as the baseline for further study on juniper's strength loss or decays in the trunk of Juniperus spp. and unequivocally helps to design the corresponding management as result of P. demidoffii.

Effect of geometrical configuration on seismic behavior of GFRP-RC beam-column joints

  • Ghomia, Shervin K.;El-Salakawy, Ehab
    • Advances in concrete construction
    • /
    • 제9권3호
    • /
    • pp.313-326
    • /
    • 2020
  • Glass fiber-reinforced polymer (GFRP) bars have been introduced as an effective alternative for the conventional steel reinforcement in concrete structures to mitigate the costly consequences of steel corrosion. However, despite the superior performance of these composite materials in terms of corrosion, the effect of replacing steel reinforcement with GFRP on the seismic performance of concrete structures is not fully covered yet. To address some of the key parameters in the seismic behavior of GFRP-reinforced concrete (RC) structures, two full-scale beam-column joints reinforced with GFRP bars and stirrups were constructed and tested under two phases of loading, each simulating a severe ground motion. The objective was to investigate the effect of damage due to earthquakes on the service and ultimate behavior of GFRP-RC moment-resisting frames. The main parameters under investigation were geometrical configuration (interior or exterior beam-column joint) and joint shear stress. The performance of the specimens was measured in terms of lateral load-drift response, energy dissipation, mode of failure and stress distribution. Moreover, the effect of concrete damage due to earthquake loading on the performance of beam-column joints under service loading was investigated and a modified damage index was proposed to quantify the magnitude of damage in GFRP-RC beam-column joints under dynamic loading. Test results indicated that the geometrical configuration significantly affects the level of concrete damage and energy dissipation. Moreover, the level of residual damage in GFRP-RC beam-column joints after undergoing lateral displacements was related to reinforcement ratio of the main beams.

우리나라 노인의 만성질환경험과 구강건강상태 및 행태와의 관련성 (The relationship among the experiences of chronic diseases, dental health status, and the behaviors in the Korean elderly people)

  • 한여정;홍선화;유미선
    • 한국치위생학회지
    • /
    • 제18권1호
    • /
    • pp.65-75
    • /
    • 2018
  • Objectives: This study aims to contribute to the prevention of dental diseases and health care in the elderly by investigating the relationship among the experiences of chronic diseases, dental health status, and the behaviors in the Korean elderly people. Methods: A total of 2,856 elderly people aged 65 or older were selected as the final analysis subjects using data from the 6th National Health and Nutrition Examination Survey (2013-2014). Chronic diseases were defined as 'cardiocerebrovascular diseases', 'diabetes', 'chronic respiratory diseases', and 'cancer' diagnosed by the doctors. For the statistical analysis, SPSS 21.0 for Windows was used. Descriptive analysis and a Chi-square test were conducted to investigate the relationship among the experiences of chronic diseases, general characteristics, dental health status, and the behaviors in the Korean elderly. Finally, logistic regression analysis was performed to investigate the relationship among the experiences of chronic diseases, dental health status, and the behaviors. Results:The prevalence of Cardiocerebrovascular diseases was significantly higher in the 3-4 group of community periodontal index with the score of 1.36 (95% CI 1.03-1.00) than in the 0-2 group. The prevalence of Cardiocerebrovascular diseases was significantly higher in the group without dental examination during the past one year with the score of 1.29 (95% CI 1.00-1.66). The prevalence of diabetes was significantly higher in the uncomfortable speaking state group with the score 1.46 (95% CI 1.12-1.91). The prevalence of cancer was significantly higher in the partial denture needs group with the score 1.67 (95% CI 0.98-2.83). Conclusions: Regular dental examinations and dental health care for the elderly with chronic diseases showed that periodontal health and residual teeth could be maintained and managed. Therefore, continuous customized dental health services should be implemented for the elderly with chronic diseases.