• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.167-172
• /
• 2002

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature, high temperature experiment. And ire got the following characteristics from fatigue crack growth test carried out in the environment of room, and high temperature at $25^{\circ}C,\;100^{\circ}C,\;150^{\circ}C$ and $180^{\circ}C$ in the range of stress ratio of 0.3 by means of opening mode displacement. The threshold stress intensity factor range ${\Delta}Kth$ in the early stage of fatigue crack growth (Region I) and stress intensity (actor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.525-539
• /
• 2014

Bonded composite-patch repair has been widely used to restore or extend the service life of damaged structures due to its effectiveness as a mechanical repair technique. In this paper using extended finite element method (XFEM), three-dimensional crack models are developed to examine the fracture behavior of centrally cracked aluminum plates repaired with single and double sided composite patches. Stress intensity factor (SIF) at the crack tip is used as the fracture criterion. In this regard, the effects of the crack lengths, patch materials, orientation of plies, adhesive and patch thickness are examined to estimate the SIF of the repaired plate and the repair performance. The obtained results show that composite patches have significant effect on reduction of the SIF at the crack tip. It is also proved that using double symmetric repair, in comparison to single one, reduces considerably SIF at the crack tip. Hence, the residual strength can be improved significantly as well as fatigue life of the structure. Investigation of ply orientation effects shows SIF increase as the ply orientation is changed from $0^{\circ}$ (perpendicular to the advancing crack) to $90^{\circ}$ (parallel to the crack line). However, the effectiveness of the ply orientation depends on the loading direction and the crack direction.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.901-910
• /
• 1989

본 연구에서는 2상계 스테인리스강의 모재 및 용접부에 대하여 대기중의 피로시험과 인공해수중의 부식피로 시험을 모재부와 용접부의 .alpha.,.gamma.상의 상비율 변화에 따른 조직의 변화 및 용접잔유응력의 영향이 크랙전파에 미치는 영향을 검토하였다. 응력-스트레인의 히스테리스곡선에서 균열닫힘 거동을 실측하고 이들의 결과로 부터 유효응력확대계수와 균열전파속도와 관계를 정리하여 이들의 문제를 해석하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.778-783
• /
• 2001

Turbine blade is subject to cyclic bending force by steam pressure. Stress analysis by fractography is already established technology as means for seeking cause of fracture and has been widely employed. In the X-ray fractography, plastic deformation and residual stress near the fracture surface can by determined and information of internal structure of material can be obtained. Therefore, to find a fracture mechanism of torsion-mounted blade in nuclear power plant, based on the information from the fracture surface obtained by fatigue test, the correlation of X-ray parameter and fracture mechanics parameter was determined and then the load applied to actual broken turbine blade was predicted.

• Journal of Mechanical Science and Technology
• /
• 제19권11호
• /
• pp.1988-1997
• /
• 2005

This study is concerned with structural integrity evaluations for the interference-fit flywheels in reactor coolant pumps (RCPs) of nuclear power plants. Stresses in the flywheel due to the shrinkage loads and centrifugal loads at the RCP normal operation speed, design overspeed and joint-release speed are obtained using the finite element method (FEM), where release of the deformation-controlled stresses as a result of structural interactions during rotation is considered. Fracture mechanics evaluations for a series of cracks assumed to exist in the flywheel are conducted, considering ductile (fatigue) and non-ductile fracture, and stress intensity factors are obtained for the cracks using the finite element alternating method (FEAM). From analysis results, it is found that fatigue crack growth rates calculated are negligible for smaller cracks. Meanwhile, the material resistance to non-ductile fracture in terms of the critical stress intensity factor (K$_{IC}$) and the nil-ductility transition reference temperature (RT$_{NDT}$) are governing factors for larger cracks.

• 대한토목학회논문집
• /
• 제4권1호
• /
• pp.125-136
• /
• 1984

용접구조에서 피로파괴는 피로균열의 성장거동에 주로 지배를 받는다. 특히 용접방향과 피로균열 성장방향의 이방성은 용접부 피로파괴의 중요한 영향인자가 된다. 피로이력을 갖고 있는 강재와 피로이력이 없는 강재를 용접시 저 ${\Delta}K$ 영역에서는 모재의 재질적인 영향인자보다 잔류응력의 영향이 크게 작용하였다. 그러나 균열이 용착금속에서 성장을 하는 경우는 용착금속의 인성이 가장 중요한 영향인자가 되는 것으로 밝혀졌다. 특히 용착금속의 인성불균일은 $da/dN-{\Delta}K$ 관계를 넓게 분포시킨다.

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1178-1185
• /
• 2010

철도차량의 고속화가 가속화되면서 화물을 운송하던 컨테이너 차량이 차륜의 파손에 의하여 탈선하는 사고가 발생하여 많은 물적 피해가 발생하고 있으며, 이러한 철도차량의 사고는 많은 인명 피해와 물적 피해를 가져오는 대형 사고로 발전할 수 있다. 따라서 이에 대한 재발 방지를 위한 차륜의 파손 해석에 대한 연구가 필요한 실정이다. 철도차량의 차륜은 기계적 하중과 열하중를 동시에 받으며, 기계적 하중으로는 철도차량의 무게에 의한 수직하중과 곡선 구간을 운행할 때 차륜과 레일의 접촉부에 수평하중이 발생하며, 철도차량의 제동시 답면제동에 의한 반복적인 열하중을 받는다. 이러한 차륜에 발생하는 기계적 하중과 열하중은 차륜의 균열과 잔류응력 등을 발생시키는 것으로 알려져 있다. 따라서, 본 연구에서는 차량 주행 시의 브레이크 이력과 하중 조건을 고려한 열 구조 연성해석을 수행하여 차륜에 부하되는 최대응력을 추정하였으며, 이 값을 파괴역학 파라미터인 응력확대계수에 적용하여 차륜의 안전성을 평가하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.477-480
• /
• 2000

It is useful way to make indentations near crack tip in order to increase fatigue life or repair a fatigue crack. In this study, bending fatigue tests were performed to investigate the optimal position of the indentations near crack tip. The results shows that fatigue life of the specimen is dramatically increased by indentation and the most effective location is the back of the crack tip.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.28-32
• /
• 1995

This effective way for repairing a fatigue crack is making indetations around fatigue crack tip. In this paper, we performed fatigue test to investigate the optimal position of the indentations, and observed crack opening behavior at the same time. The indentation positions of specimens were on the crack tip, front and back of the crack tip. The results of the experiment showed taht it was veryeffective way to increase fatigue life that making indentations on the crack tip, and it was the optimal position that making indentations on the crack tip.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1108-1114
• /
• 2001

The fatigue crack propagation behavior of the SA516-Grade 70 steel which is used for pressure vessels was experimentally examined under the condition of at room temperature, $150^{\circ}C$, $250^{\circ}C$ and $370^{\circ}C$ with stress ration of R=0.1 and 0.3. The fatigue crack propagation rate , da/dN, related with the stress intensity factor range, $\vartriangle$N, was influenced by the stress ration within the stable growth of fatigue crack(Region II) with an increase in $\vartriangle$N. The resistance to the fatigue crack growth at high temperature is higher in comparison with that at room temperature, and the resistance attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations revels that the differences of the fatigue crack growth characteristics between room and high temperatures are mainly explained by the crack and oxide-induced by high temperature.