• 폴리머
• /
• 제24권6호
• /
• pp.757-762
• /
• 2000

4-히드록시스티릴피리딘과 4-비닐벤질클로리드를 반응시켜 감광성 단량체로서 비닐벤질옥 시스티릴피리딘 (VSP)을 합성하였다. 5-20 mo1%의 VSP를 로진 moiety를 함유하는 메타크릴단량체와 라디칼 공중합하여 로진 moiety를 함유하는 몇가지 광경화성 고분자를 합성하였다. UV분광법으로 결정한 공중합체 중의 VSP의 함량은 5.3-17.3mol%정도였다. 이들 고분자의 수평균 분자량은 18000-28000정도였고 다분산지수는 1.8 정도였으며, 또한 유리전이온도는 15$0^{\circ}C$ 부근이였고 초기 열분해온도는 34$0^{\circ}C$ 정도였다. 이들 고분자는 자외선에 의해 비교적 빠르게 경화되었고, 이 광경화 반응은 UV분광법과 잔막수율법으로 분석될 수 있었다.

• 생태와환경
• /
• 제43권4호
• /
• pp.453-458
• /
• 2010

DOC (Dissolved Organic Carbon) is an operational terminology for organic carbon molecules dissolved in natural waters. DOC has been studied by ecologists extensively, because it plays a key role in various ecological functions such as substrates for secondary production and the carbon cycle. DOC also represents a substrate for microbial growth within potable water distribution systems, and can react with disinfectants (e.g., chloride) to form harmful disinfection by-products. In addition, residual DOC may carry with it organically bound toxic heavy metals. DOC in aquatic ecosystems may ultimately be transported to the oceans, or released back to the atmosphere by heterotrophic respiration, which can accelerate global climate change. There is evidence that DOC concentrations in aquatic ecosystems are increasing in many regions of the world including Europe, North America, and even in Korea. Land use changes, elevated temperature, elevated $CO_2$, recovery from acidification, and nitrogen deposition have been proposed as mechanisms for the trend. However, the key driving mechanism is yet to be conclusively determined. We propose that more extensive and longer-term observations, research of chemical properties of DOC, impacts of elevated DOC on environmental issues and interdisciplinary approaches are warranted as future studies to fill the gaps in our knowledge about DOC dynamics.

• 복식문화연구
• /
• 제10권5호
• /
• pp.578-589
• /
• 2002

The purpose of this research was to analyze the residual water retention and to determine the number and species of microorganisms from the wet cotton fabrics in dehydration and drying process during washing. The drying rates of terrycloth and interlock knit under the rainy seasons were measured according to the dehydration and hanging methods, layers of fabric and pre-treatment agents. Microorganisms were isolated from the dried terrycloth by pure culture, and were identified by Biolog system. The results are as follow: The initial water retention of fabrics after dehydration decreased in the order of dripping>centrifuge>squeezing method, which affected the drying rate. The drying rates were faster by increasing surface area of fabrics. There was no significant difference in drying rate among the fabrics pre-treated with detergent, or fabric softener, or cationic surfactants such as Cetyltrimethylammonium bromide(CTAB) and Benzalkonium chloride(BC). Puedomonas aureginosa was found in the fabrics treated with a powder-type detergent. On the other side, there was no growth of microorganism in the fabrics treated with a liquid-type detergent (containing antibacterial agent), CTAB and BC.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.81-89
• /
• 2001

본 연구에서는 차수벽 재료로 자주 사용되는 흙-벤토나이트 혼합물의 투수계수가 해수로 인하여 어떻게 영향을 받는지 고찰하였으며 혼합물로 축조된 가상의 제방에 해수가 침입할 때 어떻게 영향을 받는지를 고찰하였다. 유한요소법을 이용한 RFP 방법을 사용하였으며 투수계수변화를 이 해석에 도입하였다. 해석을 위하여 정상흐름상태와 비정상 흐름 상태에서 경계면을 구한 결과 투수계수변화를 고려하지 않았던 과거의 방법과 비교할 때 해수쪽으로는 낮게 담수영역에서는 경계면이 높게 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권4호
• /
• pp.19-26
• /
• 2012

The influence of operation time on electrokinetic restoration was investigated to remove salts from sulfate-accumulated greenhouse soil. Operation time is directly related to the process cost, therefore, we determined the relationship between operation time and removal of salts. Nitrate and sodium were removed almost completely within 2 weeks, chloride and calcium was removed in proportion to the operation time. Sulfate was accumulated at the center of anode and cathode. The soil electrical conductivity (EC), an indicator for soil salinity, showed similar shape with the residual sulfate after electrokinetic treatment. The soil EC was not changed after 2 weeks, however, the energy consumption increased with operation time. Based on the experimental results, most salts except sulfate were removed within 2 weeks, but sulfate was not removed during same time period. For the further removal of sulfate, longer operation time is in need.

• Steel and Composite Structures
• /
• 제47권6호
• /
• pp.781-794
• /
• 2023

In order to directly apply seawater and sea sand in construction without desalination, a type of square concrete-filled steel tube (CFST) encased with prefabricated seawater sea-sand concrete filled Polyvinyl Chloride (PVC)/Glass Fiber Reinforced Polymer (GFRP) tube column was proposed. Twenty short columns were tested under uniaxial loads, and the test parameters included inner tube types, seawater sea-sand concrete replacement ratios, concrete strength, the wrapping area of Carbon Fiber Reinforced Polymer (CFRP) strips and the thickness of GFRP tube. The effects of the parameters on failure modes, loading capacity, ductility and strain responses were discussed. All the tested specimens failed with serious buckling of the steel tubes and fracture of the inner tubes. The specimens had good residual bearing capacity corresponding to 64% to 88.9% of the peak capacity. The inner GFRP tubes and PVC tubes wrapped by CFRP strips provided stronger confinement to the core concrete, and were good choices for the proposed columns. Moreover, an analytical model for the composite column with different inner tube types was proposed.

• 한국환경농학회지
• /
• 제41권4호
• /
• pp.276-281
• /
• 2022

BACKGROUND: Plastics that are used in our daily lives largely end up in the environment. In agricultural environments, plastic wastes and microplastics can be found due to the uses and improper management of plastic products (e.g., vinyl greenhouses and mulching vinyl). Microplastics can also interact with contaminants in the agricultural environment. Therefore, this study was set to investigate the sorption characteristics of tetracycline, one of widely used antibiotics, on microplastics. METHODS AND RESULTS: The sorption tests were carried out with the tetracycline solutions (0-30 mg L^-1) and microplastic films prepared from low density polyethylene (LDPE) and polyvinyl chloride (PVC). The residual tetracycline concentrations were analyzed and fitted to the Freundlich and Langmuir isotherm models. The tetracycline sorption patterns on LDPE and PVC films were described better with the Freundlich isotherm model than the Langmuir isotherm model. The isotherm model parameters suggested that the maximum sorption amount of tetracyline was greater for PVC, while the sorption affinity was greater for LDPE. CONCLUSION(S): Different types of microplastics can have different sorption characteristics of tetracycline. Therefore, there is a need for continuous research on the interaction of various types and shapes of microplastics and contaminants in the environment.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.244-249
• /
• 2023

This paper presents a comprehensive analysis of the impact of surface roughness on the friction and wear properties of SUS 321, an austenitic stainless steel variant produced using the laser powder bed fusion (LPBF) technique, which is a prevalent additive manufacturing method. After the LPBF fabrication, the specimens go a heat treatment process aimed at alleviating residual stress. Subsequently, they are polished extensively to achieve a refined and smooth surface. To deliberately introduce controlled variations in surface roughness, an etching process is employed. This multi-step method encompassed primary etching in a 3M hydrochloric acid solution, followed by secondary etching in a 35 wt% ferric chloride solution, with varying durations applied to different specimens. A comprehensive evaluation of the surface characteristics ensued, employing precise techniques such as surface roughness measurements and meticulous assessments of water droplet contact angles. Following the surface treatment procedures, a series of friction tests are performed to explore the tribological behavior of the etched specimens. This in-depth investigation reached its peak by revealing valuable insights. It clarified a strong correlation between intentionally altered surface roughness, achieved through etching processes, and the resulting tribological performance of LPBF-fabricated SUS 321 stainless steel. This significantly advances our grasp of material behavior in tribological applications.

• 분석과학
• /
• 제29권5호
• /
• pp.219-224
• /
• 2016

A sensitive method to detect trace anions in hydrofluoric acid (HF) by solid-phase extraction (SPE) clean-up and ion chromatography (IC) was described. Fluoride in HF solution was eliminated with solid-phase extraction, and residual fluoride, acetate, chloride, bromide, nitrate, phosphate and sulfate were consecutively separated with IC. The SPE parameters (selection of adsorbent, sample volume and pH, elution solvent and its volume) were optimized and selected. The removal effect of fluoride in HF solution was the best on Oasis WAX column, and the optimum conditions (1.0 mL of 25 % HF solution and 50 mM ammonium acetate 5 mL as elution solvent) were established by the variation of parameters. Under the established condition, the method detection limits of chloride, bromide, nitrate, phosphate, and sulfate were 0.04~0.30 µg/L in 25 % HF solutions (w/w) and the relative standard deviation was less than 5 % at concentrations of 20.0 and 40.0 µg/L. The concentrations of anions in a 25 % HF had detectable levels of 4.2 to 47.5 µg/L. The method was sensitive, reproducible and simple enough to permit the reliable routine analysis of anions in HF solution used in the process of producing semiconductors.

• 방사성폐기물학회지
• /
• 제17권2호
• /
• pp.127-137
• /
• 2019

삼불화알루미늄($AlF_3$)이 포함된 염화물-불화물 혼합 용융염에서 ZIRLO 튜브를 이용한 지르코늄 전해정련공정을 실증하였다. 순환 전압전류실험 결과, $AlF_3$의 농도가 증가함에 따라 금속환원의 개시 전위가 일정하게 증가하고 지르코늄-알루미늄 합금형성과 관련된 추가적인 peak의 크기가 점차 증가하는 것으로 나타났다. 전류조절 전착법과 달리, -1.2 V의 일정전위에서 수행한 지르코늄 전해정련에서 방사형 판 구조의 지르코늄 성장이 염의 상단 표면에서 확연하게 나타났으며, 전착물 지름의 크기는 $AlF_3$의 농도에 따라 점차 증가하는 것으로 나타났다. 주사전자현미경(SEM)과 에너지 분산 X선 분광기(EDX)와 X선 광전자 분광기(XPS)를 이용하여 판 구조의 지르코늄 전착물을 분석한 결과, 극미량의 알루미늄이 지르코늄-알루미늄 합금 형태로 존재하며, 전착물의 상단과 하단 간에 서로 다른 화학성분구조를 갖는 것으로 나타났다. $AlF_3$의 첨가는 전착물 내 잔류염 양을 줄이고, 지르코늄 회수를 위한 전류효율을 향상시키는 데 효과적인 것으로 나타났다.