• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.102-108
• /
• 2023

A Chloride-induced stress corrosion cracking (CISCC) of austenite stainless steel in dry cask storage system (DCSS) can occur with extending service time than originally designed. Cold spray coating (CSC) not only form a very dense microstructure that can protect from corrosive environments, but also can generate compressive stress on the surface. This characteristic of CSC process is very helpful to increase the resistance for CISCC. CSC with several powders, such as 304L, 316L and Ni can be optimized to form very dense coating layer. In addition, the impact energy generated as the CSC powder collides with the surface of base metal at a speed of Mach 2 or more can remove the residual tensile stress of welding area and serve the compress stress. CSC layers include no oxidation and no contamination with under 0.2% porosity, which is enough to protect from the penetration of corrosive chloride. Therefore, the CSC coating layer can be accompanied by a function that can be disconnected from the corrosive environment and an effect of improving the residual stress that causes CISCC, so the canister's CISCC resistance can be increased.

• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.176-182
• /
• 2018

Corrosion of the Cu alloy with 10wt% Ni in stagnant seawater with residual free chlorine was investigated. Despite that fact that Cu alloys are widely used for seawater applications due to their stubborn resistance to chloride attack, not much is known as to how the residual free chlorine in seawater affects corrosion of Cu and its alloys. In this work, immersion tests were conducted in the presence of different levels of chlorine for 90-10 Cu-Ni samples, one of the most frequently used Cu alloys for seawater application, mostly in shipbuilding. The results revealed no evidence for accelerated corrosion of the Cu-Ni alloy even in the presence of 5 ppm residual chlorine in seawater, signifying that the Cu-Ni alloy can be more tolerant to residual chlorine that has been commonly cited by the shipbuilding industry. However, comparison of polarization behavior of the alloy samples in the presence of different electrolytes with different concentrations of residual chlorine suggests that higher concentration of chlorine could increase the corrosion rate of the Cu-Ni alloy. Furthermore, it is suggested that microorganisms in the seawater could increase the corrosion rate of the Cu-Ni alloy by encouraging exfoliation of the corrosion product off the metal surface.

• Bulletin of the Korean Chemical Society
• /
• 제6권6호
• /
• pp.329-333
• /
• 1985

A procedure for the preparation of peptizable pseudoboehmite has been described in detail based upon a process of neutralization of an aqueous aluminum sulfate or chloride solution with aqueous ammonia. In order to obtain peptizable pseudoboehmite products, carefully controlled conditions were required in the whole processes of neutralization, aging, washing, and drying. The optimum conditions experimentally found are the following. The aluminum salt solution is neutralized with aqueous ammonia until the final pH of the solution reaches 10.0 to 10.8 or 9.0 to 9.3 for the sulfate of chloride, respectively. The alumina gel formed is subjected to aging at $80^{\circ}C for about 3 hours and washed with water more than 5 times to reduce the residual sulfate or chloride ion in the final products to less than 4%. The pseudoboehmite gel thus obtained should be dried oven at 80 to $100^{\circ}C for a few to several hours depending on the selected temperatures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.315-316
• /
• 2023

In the present investigation, the chloride ion penetration resistance of nuclear power plant concrete with varying water-to-cement ratios was assessed. A comparative analysis was conducted on concretes that do not incorporate supplementary cementitious materials, such as fly ash, using permanently decommissioned nuclear structures as a reference. The objective is to employ this acquired data as a fundamental resource for the evaluation of the residual service life of nuclear power plant structures in subsequent studies.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.226-234
• /
• 2011

해양환경 하에서 염화물의 침투를 억제하여 부식 위험을 최소화함으로써 콘크리트 구조물의 공용기간을 연장할 수 있다. 효과적으로 구조물을 관리하기 위해 적절하게 유지관리하는 것이 필요하다. 본 연구에서는 효과적인 유지관리 전략을 세우기 위한 보수된 구조물의 유지관리비용 평가와 연계하여 구조물의 사용수명을 정량적으로 평가하는 방법을 제안하였다. Fick의 제2법칙으로부터 Crank-Nicolson법에 기초한 유한 차분법을 제안하여 보수되지 않은 콘크리트 구조물과 보수된 콘크리트 구조물의 염화물 이온 분포를 예측하였다. 이를 이용하여 보수에 의해 연장 가능한 사용수명과 목표한 공용기간 동안에 필요한 보수 횟수를 평가하였다. 게다가 보수 횟수와 콘크리트 교체 비용을 고려하여 총 유지관리 비용을 산출하였다. 마지막으로 제안된 방법의 적용성 검토를 위해 수치해석 예제를 제시하였다.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.553-557
• /
• 2022

본 연구에서는 전기화학적 염화물 추출법에 따른 염소이온 제거 성능을 평가하였다. 4M의 NaCl 수용액을 이용하여 염소이온을 콘크리트 내부로 침투 시켰으며, 1년간의 양생기간이후 전기화학적 염화물 추출법을 적용하였다. 1,000 mA/m²의 전류밀도를 2주, 4주, 8주간 인가하였으며, 2 mm 단위로 총 염소이온과 자유 염소이온을 프로파일 하였다. 전기화학적 염화물 추출법을 적용한 시편에서 모든 깊이에서의 잔존 염화물 농도가 감소하였으며, 적용 기간이 증가함에 따라 염소이온 농도가 감소하였다. 8주간의 적용기간 이후 총 염소이온 프로파일에서 62.9~77.6 %의 염소이온 제거 성능을 나타내었으며, 자유 염소이온 프로파일에서 77.7~99.5 %의 제거 성능을 나타내었다. 특히, 콘크리트 표면으로부터 7 mm 이상의 깊이에서 잔존 자유 염소이온 농도는 시멘트량 대비 0.01 % 이하로 나타났다. 또한 고정화된 염소이온 프로파일을 통하여 전기화학적 염화물 추출법으로 인해 고정화된 염소이온이 제거될 수 있음을 확인하였다.

• 한국재난정보학회 논문집
• /
• 제13권2호
• /
• pp.147-154
• /
• 2017

듀플렉스 스테인리스강은 일반 오스테나이트계 스테인리스강과는 다른 열적, 기계적 성질로 인하여 일반 스테인리스강과는 다른 잔류응력 크기와 분포를 가진다. 따라서 듀플렉스 스테인리스강을 강구조물에 적용시키기 위해서는 용접부의 잔류응력 특성에 대한 연구가 반드시 선행되어야 한다. 본 연구에서는 듀플렉스 스테인리스강 용접시 발생하는 잔류응력을 스트레인 게이지를 이용한 응력 이완법을 이용하여 실험적으로 측정하여 용접부의 잔류응력 특징을 조사하였다.

• 한국축산식품학회지
• /
• 제40권6호
• /
• pp.980-989
• /
• 2020

The objective of this study was to compare the effects of various salts on the physicochemical properties of pork emulsion sausages. Pork sausages were prepared using two different salts, sodium nitrite (SN) and sodium chloride (SC), and concentrated seawater (CSW). The CIE L*, CIE a*, and CIE b*, and chroma values of cooked and uncooked sausages with added CSW were significantly higher than those of the sausages with added SC (p<0.05). However, uncooked and cooked sausages with added SN and CSW had similar CIE a* values (p>0.05). The residual NO₂^- content of sausages with added CSW was significantly lower than that of sausages with added SN. Addition of CSW to sausages resulted in a higher cooking yield compared to the other treatments (p<0.05). Addition of SC resulted in significantly higher volatile basic nitrogen (VBN) and thiobarbituric acid (TBA) values compared to the other treatments. Furthermore, addition of CSW enhanced important physicochemical properties, including CIE a*, CIE b*, residual nitrite content, cooking yield, VBN, TBA, textural properties, and cross-sectional area.

• 한국환경과학회지
• /
• 제11권7호
• /
• pp.721-727
• /
• 2002

The characteristics of drinking groundwater quality at Chung Cheong Nam Do was analyzed by investigating the 3,086 groundwater data which were carried out the water quality inspection from Jan. 1998 to Dec. 1998. It was found that all the mean concentration of items was not over the drinking water quality standard except Zn at Yeongee area. The highest mean concentration of nitrate was $8.2 mg/{\ell}$ at Hongsung area. And the mean concentrations of nitrate and ammonium at Sucheon, Yesan, Yeongee were relatively higher. It was considered that the groundwater of that area was contaminated by breeding livestock as farm pollutants. The mean concentrations of chloride, hardness and evaporation residual at coastal regions were higher than inland regions. Especially the mean concentration of chloride was 2.5 times higher. It was considered that the groundwater at coastal regions was affected by seawater. It was found that the correlation between Fe and Mn was relatively high(r=0.776) and the correlation between hardness and evaporation residual was very high(r=0.983). The rainfall series and detection rate of E-coli had the hydrologic persistence. The correlation between the detection rate and rainfall series over 150 mm was very high (r=0.9146). Therefore it is surely required to control the groundwater sanitation in the rainy season.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.73-81
• /
• 2015

Chloride plating solution was fabricated by dissolving metal Ni powders in solution with HCl and deionized water. Effects of deposition conditions on the properties of Ni films electrodeposited from chloride baths were studied. Current efficiency of Ni films electrodeposited from the baths containing saccharin was decreased with increasing the current density. Residual stress of Ni thin films ware measured to be about 230 ~ 435 MPa in the range of current density of $10{\sim}25mA/cm^2$. Cathode current efficiency in baths without saccharin was initially increased with increasing pH, while it was decreased with increasing pH further. Cathode current efficiency in baths with saccharin (except at pH 2) exhibited less 10 ~ 20% than that in baths without saccharin. Residual stress of Ni films electrodeposited from baths without saccharin was measured to be 388 ~ 473 MPa in the range of pH 2 ~ pH 5 and then was increased to 551 MPa at pH 6. On the other hand, residual stress of Ni films electrodeposited from baths with saccharin was increased with increasing pH. Surface morphology was strongly affected by the change of current density, but slightly by solution pH and addition of saccharin.