• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.77-86
• /
• 2017

This study was conducted to analyze the relationship among climatic factors and radial growth of Pinus densiflora and Larix kaempferi in South Korea. To determine the climate-growth relationship, cluster analysis was applied to group surveyed regions by the climatical similarity, and a dendroclimatological model was developed to predict radial growth for each climate group under the RCP 4.5 and RCP 8.5 scenarios for greenhouse gases. The cluster analysis showed four climatic clusters (Cluster 1~4) from 10 regions for P. densiflora and L. kaempferi. The dendroclimatological model was developed through climatic variables and standardized residual chronology for each climatic cluster of P. densiflora and L. kaempferi. Four climatic variables were used in the models for P. densiflora ($R^2$ values between 0.38 to 0.58). Two to five climatic variables were used in the models for L. kaempferi ($R^2$ values between 0.31 to 0.43). The growth simulations with two RCP climate-change scenarios(RCP 4.5 and RCP 8.5) were used for growth prediction. The radial growth of the Cluster 4 of P. densiflora, the mountainous region at high elevation, tend to increase, while those of cluster 2 and 3 of P. densiflora, the region of the hightest average temperature, tends to decrease. The radial growth of the Cluster 1 of L. kaempferi the region of the lowest minimum temperature, while that of Cluster 2, the region of the highest average temperature, tends to decrease. The radial growth of Cluster 3 of L. kaempferi, the region in the east coast and Cluster 4, the region at high elevation, tends to hold steady. The results of this study are expected to provide valuable information necessary for predicting changes in radial growth of Pinus densiflora and Larix kaempferi caused by climate change.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.529-544
• /
• 2018

Dongrae hot spring belongs to the residual magma type and has a long history of bathing since the Silla dynasty in Korea. Due to long development of hot spring water, it is expected that the amount of hot spring water in Dongrae hot spring has been changed. In this study, long-trem water level data of Dongrae hot spring were examined for recognizing the change of the hot spring. By the fluctuation analysis of the hot spring water level from January 1992 to July 2018, the maximum and minimum annual drawdowns of no. 27 well were 137.70 and 71.60 meters, respectively, with an average drawdown of 103.39 m. On the other hand, the maximum and minimum annual drawdowns of no. 29 well were 137.80 and 71.70 meters, with an average drawdown of 103.49 m. Besides, drawdown rate became bigger in recent years. As a result of analyzing autocorrelation of the two wells, the correlation coefficient ranged from 0.919 to 0.991, showing seasonal groundwater level fluctuation. The cross correlation analysis between water level and precipitation as well as water level and hot spring discharge resulted in the correlation coefficients of -0.280 ~ 0.256 and 0.428 ~ 0.553, respectively. Therefore, using Dongnae hot-spring water level data from 1992 to 2018, the Mann-Kendall test and Sen's test showed that the continuous decline of water level was mainly caused by the pumping of the hot spring water among various reasons.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2021

Hydroponic farming is a method to grow a plant without soil. Plants can be grown on water or hydroponic growing media, and they are fed with mineral nutrient solutions, which are fertilizers dissolved into water. Hydroponic farming has the advantage of increasing plant productivity over conventional greenhouse farming. Previous studies of hydroponic nutrient wastewater from acyclic hydroponic farms pointed out that hydroponic nutrient wastewater contained residual nutrients, and they were drained to a nearby river bank which causes several environmental issues. Also, previous studies suggest that excessive use of the nutrient solution and disposal of used hydroponic growing media and crop wastes in hydroponic farms are major problems to hydroponic farming. This study was conducted to determine the impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farms on the surrounding environment by analyzing water quality and soil analysis of the above three factors. Three soil cultivation farms and several hydroponic farms in the Gangwon C region were selected for this study. Samples of water and soils were collected from both inside and outside of each farm. Also, a sample of soil and leachate from crop waste piles stacked near the farm was collected for analysis. Hydroponic nutrient wastewater from acyclic hydroponic farm contained an average of 402 mg/L of total nitrogen (TN) concentration, and 77.4 mg/L of total phosphate (TP) concentration. The result of TP in hydroponic nutrient wastewater exceeds the living environmental standard of the river in enforcement decree of the framework act on environmental policy by 993.7 times. Also, it exceeds the standard of industrial wastewater discharge standards under the water environment conservation act by 6~19 times in TN, and 2~27 times in TP. Leachate from crop waste piles contained 11,828 times higher COD and 395~2662 times higher TP than the standard set by the living environmental standard of the river in enforcement decree of the framework act on environmental policy and exceeds 778 times higher TN and 5 times higher TP than the standard of industrial wastewater discharge standards under the water environment conservation act. For more precise studies of the impact of hydroponic nutrient wastewater, used hydroponic growing media, and crop wastes from acyclic hydroponic farms on the surrounding environment, additional information regarding a number of hydroponic farms, arable area(ha), hydroponic farming area, seasonal, weather, climate factor around the river, and the property of the area and farm is needed. Analysis of these factors and additional water and soil samples are needed for future studies.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.150-164
• /
• 2022

This study was conducted to provide basic information for the development of silvicultural guidelines and manuals. This was achieved through analysis of tree and stand characteristics according to the first and second thinning in Korean white pine plantations. Data were collected from permanent plots installed at Korean white pine plantations according to thinning intensity, and residual tree and stand variables, including diameter at breast height (DBH), volume, and mortality at age 19-43, were analyzed using data repeatedly collected in 4-5 measurements by experiments. According to one-way variance of analysis, tree DBH and volume were significantly different according to thinning intensity (p<0.05). DBH distribution was skewed to the left side over time as thinning intensity was heavier. Thus, tree DBH values were larger in heavy thinning plots with increased age. The periodic annual increment (PAI) of DBH was higher with heavier thinning intensity and fewer years after thinning. The PAI range by thinning intensity was 0.48-0.95 cm/year at age 19-24. In addition, the PAI increased in heavy thinning plots after the second thinning; The PAI range by thinning intensity was 0.29-0.67 cm/year after the second thinning at age 37-42. The PAI of tree volume differed according to thinning intensity, and the PAI value did not decrease obviously, in contrast to the pattern of the DBH PAI. Stand volume was generally higher in high-density stands, and the PAI of stand volume was high in unthinned and light thinning plots. Mortality was highest in unthinned plots, and the differences in mortality according to thinning intensity increased over time. Consequently, the growth of DBH and tree volume was lower as stand density increased, but this growth was facilitated with appropriate first and second thinning operations.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.389-406
• /
• 2023

The research area, located in the northern coastal region of South Korea's West Sea, involves three bird habitats. Among these are two newly established habitats in Songdo International Business District, created by filling and developing tidal flats that were previously utilized as stopover sites for migratory birds. One of these areas showed decrease (Residual tidal flats, site.1) while the other showed increase (Artificial lake, site.2) in bird influx. The third habitat (Namdong reservoir, site.3) is a pre-existing stable habitat which has been maintained as a stable habitat. This study conducts an assessment of habitats based on avian population clusters and environmental surveys and proposes habitat management measures. A survey of bird populations and habitat environments was conducted for a total of 39 occasions from January to December 2022. The observed bird species totaled 14 families and 48 species with 20,760 individuals. Compared to the existing habitats, the newly established habitats showed relatively lower influx of bird species and individuals. During the habitat assessment, the newly established habitats were rated as I to II grade, while the existing habitat was rated as relatively high III grade on the grading assessment of the tidal flat. An analysis of habitat types revealed that the existing habitat, in which diverse strategies for habitat type diversity and mitigating anthropogenic interference were demonstrated, attracted a diverse range of bird species. Through this research, it was deduced that the diversity of habitat types plays a significant role in attracting various bird species. Upon evaluation of habitat types concerning the habitat characteristics of the bird species selected for habitat management, as habitat management measures, it is deemed that the creation of shielded green areas (referred to as 'buffer green') to minimize interference from the surroundings, the establishment of reed fields (site.1, 2) positively correlated with reservoirs, and the improvement of sandbanks (site.1) positively associated with tidal flats, the two relations which we drew from correlation analysis between occurrence species and habitat types, would contribute to the future restoration and maintenance of stable habitats. The results of this study can be applied not only to the study area but also to other development zones, such as coastal reclamation sites, which share similar geographical and environmental characteristics, including arrival sites for migratory birds.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.280-290
• /
• 1984

An extensive study has been made on the relationship between the freshness and the compositions of the muscle protein of prawn, Pandalus japonica during the storage under partially frozen condition. The variations of the subunit distribution for sarcoplasmic protein and myofibrillar protein extracted from the samples by changes of freshness were discussed by sodium dodecylsulfate-poly-acrylamide gel (SDS-PAG) electrophoresis. On the other hand, the denaturation constant ($K_D$) of the myofibrillar protein extracted from the prawn stored at $-3^{\circ}C\;and\;-20^{\circ}C$ were successively compared. The prawn muscle contained about $18\%$ of protein with the composition of $32\%$ in sarcoplasmic protein, $56\%$ in myofibrillar protein, $10\%$ in residual intracellular protein and $2\%$ in stroma. The indices for estimating freshness of the muscle were approached to the early stage of putrefaction on the 26th day of the storage with $25.29mg\%$ of total volatile basic nitrogen, $31.36\%$ of K-value and 8.83 of pH. The content of the myofibrillar protein was remarkably decreased with the time during the storage while that of residual intracellular protein was increased. The $K_D$ values of the myofibrillar protein were $9.03{\times}10^{-6}sec^{-1}\;at\;-3^{\circ}C\;and\;4.42{\times}10^{-6}sec^{-1}\;at\;-20^{\circ}C$. The results of the analysis of SDS-PAG electrophoretograms indicated that the sarcoplasmic protein and the myofibrillar protein were composed of 12 subunits and 17 subunits in the muscle of instantaneously killed prawn ana were changed into 8 subunits and 22 subunits in the muscle stored for 26 days, respectively. It is noticeable that 30,000, 41,000, 107,000, 136,000, 170,000 173,000, 185,000, and 198,000 daltons of the newly appeared 8 subunits were found in the myofibrillar protein from the prawn muscle stored for 26 days. The amino acid composition of the muscle protein showed that the most of amino acids were slightly decreased with the days of the storage. With respect to the free amino acid composition of the muscle of instantaneously killed prawn, glycine, proline, arginine, alanine and taurine comprised $93\%$ of the total free amino acids. Taurine, valine, leucine, phenylalanine, serine, lysine, methionine, isoleucine and histidine were increased during the storage period but exceptionally proline was decreased.

• Applied Biological Chemistry
• /
• v.8
• /
• pp.87-93
• /
• 1967

1) For the micro-analysis of mercury in plant materials, the method of Furutani was shown to be the simplest and most efficient way and the recovery of the assay was about 98%. 2) When the rice grain was soaked in 1/1000 diluted solution of organo-mercury fungicide for 8 hours at the end of March, the amounts of mercury residues in the brown rice and unhulled rice were 8.8 to $9.5\;{\mu}g/g$ seeds and 10.1 to $10.7\;{\mu}g/g$ seeds, respectively. 3) By washing the treated rice seeds with running water for three days, tile residual mercury concentration was reduced to 1/4 to 1/5; thus the mercury residues were 1.86 to $1.92\;{\mu}g/g$ for brown rice and 1.96 to $2.93\;{\mu}g/g$ for unhulled rice. 4) The residual mercury was present more in the unhulled rice than in the brown rice, either before or after washing of the treated seeds. 5) Among the different rice varieties, no difference was observed in mercury residues by seed treatment and washing.

• 한국사회복지학회:학술대회논문집
• /
• 2003.10a
• /
• pp.185-216
• /
• 2003

This study was aimed at investigating important factors influencing career success among regular workers. The current researcher scrutinized the degree to which variables and factors affect the career success and occupational turnover rates of the research participants. At the same tune, two hypothetical path models established by the researcher were examined using linear multiple regression methods and the LISREL. After examining the differences among the factors of career success, a comparison was made between the disabled worker group and the non-disabled worker group. A questionnaire using the 5-point Likert scale was distributed to a group of 374 workers with disabilities and 463 workers without disabilities. For the data analysis purpose, the structural equation model, factor analysis, correlation analysis, and multiple regression analysis were carried out. The results of this study ran be summarized as follows. First, the results of factor analysis showed important categories of conceptual themes of career success. The initial conceptual factor model did not accord with the empirical one. A three-factorial model revealed categories of personal, family, and organizational factor respectively. The personal factor was composed of the self-esteem and self-efficiency. The family factor was consisted of the multi-roles stress and the number of children. Finally, the organizational factor was composed of the capacity for utilizing resources, networking, and the frequency of mentoring. In addition, the total 10 sub areas of career success were divided by two important aspects; the subjective career success and the objective career success. Second, both research participant groups seemed to be influenced by their occupational types. However, all predictive variables excluding the wage rate and the average length of work years had significant impact on job success for the disabled work group, while all the variables excluding the frequency of advice and length of working years had significant impact on job success for the non-disabled worker group. Third, the turnover rate was significantly influenced by the age and the experience of turnover of the research participants. However, the number of co-workers was the strongest predictive variable for the worker group with disabilities, but the occupation choice variable for the worker group without disabilities. For the disabled worker group, the turnover rate was differently influenced by the type of occupation, the length of working years, while multi-role stress and the average working years at the time of turnover for the worker group without disabilities. Fifth, as a result of verifying the hypothetical path model, it showed that the first model was somewhat proper and could predict the career success on both research participant groups. In the second model, the Chi-square, the degree of freedom (($x^2=64.950$, df=61, P=0.341), and the adjusted Goodness of Fit Index (AGFI) were .964, and the Comparative Fit Index (CFI) were .997, and the Root Mean Squared Residual (RMR) was respectively. .038. The model was best fitted and could predict the career success more highly because the goodness of fit index in the whole models was within the allowed range. In conclusion, the following research implications can be suggested. First, the occupational type of research participants was one of the most important variables to predict the career success for both research participant groups. It means that people with disabilities require human development services including education. They need to improve themselves in this knowledge-based society. Furthermore, for maintaining the career success, people with disabilities should be approached by considering the subjective career success aspects including wages and the promotion opportunities than the objective career success aspects.

• Food Science and Preservation
• /
• v.16 no.6
• /
• pp.810-816
• /
• 2009

To identify effective food packaging compounds that could significantly affect the freshness of stored food, the efficiency and performance of porous polypropylene film containing mustard oil as a freshness maintenance ingredient was studied by GC-MS analysis and storage testing of bread. AITC (allyl-isothiocyanate)-emitting properties of films impregnated with mustard oil were evaluated by GC-MS. AITC was extracted from mustard oil, and used as a vapor as an effective antimicrobial agent. Films were prepared under four different conditions (the film types were abbreviated 25SF1, 25SF2, 50LF, and IAF) and the amounts of AITC inside vinyl packs constructed using the four films were measured. The results showed that the 25SF2 film (width 25 mm, length 20 cm) yielded a greater amount of AITC than did the 50LF film (width 50 mm, length 20 cm). We confirmed that the amount of gas emission showed better between layer and layer of the film side than the internal film. In storage testing using various films at $35^{\circ}C$ for 25 days, 25SF2 film provided excellent preservation of bread compared with 50LF film. This was in line with the fact that 25SF2 film yielded the highest amount of AITC. Emission capacities AITC of 2 cm film were measured using bottles various volumes (43 mL, 500 mL, 1000 mL) and both closed and open systems. The AITC content of the film in 43 mL bottle was much higher than that yielded by other films in the closed system, and AITC was rapidly emitted, with relatively low residual gas emission after 4 days in an open system. Mustard oil is a useful freshness maintenance ingredient hence, analysis of AITC emission kinetics from various films were helpful to develop films with optimal antimicrobial effects, and will allow application of such films in food packaging systems.