• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.217-223
• /
• 2014

Recently, various researches and projects about electric vehicles are in progress vigorously and continuously and it is expected to penetrate rapidly with the next a few years. This deployment will cause the change of load composition rate affecting on power system planning and operations. Therefore, a new load model should be developed integrating with electric vehicle loads. In this paper, the load composition rate of residential sectors is analyzed considering the deployment of this mobility load such as electric vehicles and a new diffusion model is proposed based on the classification of the replacement patterns. Additionally, electric vehicle charging loads are basically modeled by some individual load experiments to develop new load models for smart place and some new conceptual power systems such as micro grids.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.1
• /
• pp.42-49
• /
• 2010

The IIS(Internal Insulation System) is applied in most Korean apartment buildings which are the most common type of residential buildings. Consequently, there are many cases in which the layer of insulation is disconnected by the structural components at the wall-slab and wall-wall joints in the envelope. These joints become thermal bridges where the risk of heat loss increases. It is expected that the EIFS(External Insulation and Finish System) is the solution to this problem. In this study, annual heating and cooling loads of apartment buildings with IIS and EIFS were compared using Design Builder program in order to evaluate the thermal storage effect of EIFS where the concrete thermal mass is located inside of the insulation material. As results, the apartment building with EIFS could reduce annual heating and cooling loads by 2.4% and 4.1%, respectively.

• Wind and Structures
• /
• v.29 no.3
• /
• pp.177-194
• /
• 2019

While establishing adequate load paths in the light-frame wood structures is critical to maintain the overall structural integrity and avoid significant damage under extreme wind events, the understanding of the load paths is limited by the high redundant nature of this building type. The objective of the current study is to evaluate the system effects and investigate the load paths in the wood structures especially the older buildings for a better performance assessment of the existing building stock under high winds, which will provide guidance for building constructions in the future. This is done by developing building models with configurations that are suspicious to induce failure per post damage reconnaissance. The effect of each configuration to the structural integrity is evaluated by the first failure wind speed, amajor indicator beyond the linear to the nonlinear range. A 3D finite-element (FE) building model is adopted as a control case that is modeled using a validated methodology in a highly-detailed fashion where the nonlinearity of connections is explicitly simulated. This model is then altered systematically to analyze the effects of configuration variations in the model such as the gable end sheathing continuity and the gable end truss stiffness, etc. The resolution of the wind loads from scaled wind tunnel tests is also discussed by comparing the effects to wind loads derived from large-scale wind tests.

• Journal of Korean Society on Water Environment
• /
• v.24 no.5
• /
• pp.543-549
• /
• 2008

Human activities and land-use practices are intensely widening the urban areas. High impervious surface areas cover much of urban landscapes and are the primary pollutant sources which can lead to water quality and habitat degradation in its watershed. As the urban areas expand, transportation land-use such as parking lots, roads, service areas, toll-gates in highways and bridges also increase. These land-uses are significant in urban pollution due to high imperviousness rate and vehicular activities. To regulate the environmental impacts and to improve the water quality of rivers and lakes, the Ministry of Environment (MOE) in Korea developed the Total Pollution Load Management System (TPLMS) program. The main objective is to lead the watershed for a low impact development. On a local scale, some urban land surfaces can be emitting more pollution than others. Consequently, in urban areas, the unit loads are commonly employed to estimate total pollutant loadings emitted from various land-uses including residential, commercial, industrial, transportation, open lands such as parks and golf courses, and other developed land like parking areas as a result of development. In this research, unit pollutant loads derived specifically from transportation land-uses (i.e. branched out from urban areas) will be provided. Monitoring was conducted over 56 storm events at nine monitoring locations during three years. Results for the unit pollutant loads of transportation land-use are determined to be $399.5kg/km^2-day$ for TSS, $12.3kg/km^2-day$ for TN and $2.46kg/km^2-day$ for TP. The values are higher than those of urban areas in Korean MOE and US highways. These results can be used by MOE to separate the pollutant unit load of transportation landuses from urban areas.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1280-1285
• /
• 2011

Recently, due to the use of fossil fuels for electric power production, carbon emissions increased excessively. Thereby, in order to replace fossil fuels, many studies about fossil fuels such as solar and fuel cell energy source are progressing. Fuel cell system has high energy conversion efficiency. Also, fuel cell system is environmentally friendly system because the carbon emission is almost not occur. Therefore, the fuel cell system is considered as the core technology of in the fields of the future energy and environmental. Fuel cell system has an effect on distribution power system because another power source of other than large power plants. So, fuel cell system can be degradation reason of power quality in the power system. In this paper, we constructed the system for an assessment on harmonics effect. The system is composed with power source, harmonics generation and linear load, fuel cell system. we also performed assessment on harmonics effect in customer and the distributed power system during grid connection of residential fuel cell system. An assessment cases are divided into three. A Case 1 is state that residential load and fuel system are connected to grid, Case 2 is state that residential load and harmonics load are connected to grid, and Case 3 is state that all loads are connected to grid. As a output of fuel cell system is increase, analysis results based on assessment system showed that power quality became more aggravation as effect of harmonics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.265-273
• /
• 2008

The problem controlling lateral drift by the wind and the earthquake is very important in high rise buildings. But, outrigger system, generally used for residential tall buildings in Korea, has weak points with the occupancy of special space, the difficult construction and the long duration of works. On the other hand, the damper reduces story drifts of building structure by absorbing vibration energy induced by the dynamic loads and the application of damper systems is relatively simple. Also, the lateral drift control system such as outrigger system may raise the wind vibration problem of serviceability like human comfort and this problem may need another vibration control devices. Accordingly, we analyze the effect of the drift control using various dampers to substitute for outrigger system as the efficient system in residential tall buildings.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.137-143
• /
• 2021

In the case of residential facilities, general fire scenarios cannot be applied. Becauseit is difficult to quantify due to the types of combustibles and various fire loads. Existing research conducting surveys of combustibles, but research on fire characteristics is insufficient. Therefore, in this study, an Excel macro that can be quantified by experimenting with the HRR experiments of sofa, drawer, mattress, chair, desk and TV, which are typical combustibles. As a result of experimenting 6 loading combustibles in domestic residential facilities by using a furniture calorimeter, values of 2,391.26kW appeared from the sofa, 1,891.80kW from the drawer, 1,778.95kW from the mattress, 1,104kW from the chair, 291kW from the desk, and 135.09kW from the TV. Also, by applying the α value of the fire growth rate by classifying fire-growing speeds at NFPA 72 (National Fire Alarm Code 2007, Annex B), the mattress can be defined as Very Fast, the sofa and drawer Fast, the TV Slow, the desk Slow, and the chair Medium.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.41-46
• /
• 2012

The building envelope is important specially for saving energy consumption of residential buildings. but Apartment houses in Korea commonly have inside insulation system which have constantly arisen thermal bridges, the risk of heat loss, as a necessity. This study aims to evaluate integrated insulation performance according to the different shapes of external walls, adjacent to windows. The thermal performance analysis was carried out by Equivalent U-value and using the three-dimensional heat transfer computer simulation (TRISCO-RADCON), under nine different cases of comparing among three each of different bases(current standard model, 30percent energy saving model and 60percent energy saving model). The heating and the cooling load were also compared between two cases (standard U-value and Equivalent U-value) of three each of different bases, using the Building energy simulation which is based on DOE-2.1 analysis. As results, it turns out that if the Equivalent U-value is considered on the envelope analysis, the heat flow loss will be increasing more than the standard U-value, and if heat insulation property of the residential building reinforced rather than current, the rate of influences on the thermal bridges would be extremely expanded. In addition, it is shown that annual heating loads of the apartment house with applied Equivalent U-value substantially increased by more than 15 percent compared to those with the existing U-value, but annual cooling loads were negligibly affected.

• Journal of Environmental Science International
• /
• v.21 no.11
• /
• pp.1349-1360
• /
• 2012

This study presented the phytoplankton communities of the three lakes (Sayeon, Daeam, Hoeya ) using for drinking water in the Ulsan reservoir. The water storage of the Lake Sayeon, Daeam and Hoeya were 25, 13, 21 million ton respectively and most of which were being utilized for industrial and residential purposes. The total precipitation of the Ulsan region in 2010 was 1,162 mm, decreasing 10 % from 1,275 mm of the annual. As for pollutant loads, BOD and TN discharge loads of Daeam was the highest with 3,277 kg/day, 1,931 kg/day and 90 % of them were came from non-point pollutant sources. TP discharge loads showed the highest in the lake Hoeya with 643 kg/day and 97 % of them were came from point sources as household, industry and livestock. We assessed water quality of the lake Sayeon, Daeam and Hoeya using 17 variables. The water quality assessment found that the lake Daeam met the fourth to fifth grade because of high concentration of COD, SS and chlorophyll-a. Eutrophication assessment was conducted by revised Carlson's Index (TSIm, Aizaki) and found that Lake Daeam was more eutrophicated than the other two lakes all the year through as for chlorophyll-a, transparency and the total phosphorus (TP). A total of 95~111 phytoplankton species were identified from the three lake samples. Among them, the largest number of species were Chlorophyceae with 35~51, followed by Bacillariophyceae with 36~45, Cyanophyceae with 9~11, and Cryptophyceae with 6~9 species. The total cell number of phytoplankton was the highest in February (15,254 cells/mL) with Bacillariophyceae in the lake Daeam and the seasonal succession shows that Bacillariophyceae (Stephanodiscus spp.) in the spring, Cyanophyceae (Anabaena spp.) in the summer and the autumn, Bacillariophyceae (Stephanodiscus spp.) in the winter.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1445-1456
• /
• 2010

This study presented seasonal changes of the phytoplankton community in Junam reservoir by pollution and water quality of the lake. The water storage of the reservoir is 5.3 million ton, most of which are being utilized for agricultural, industrial and residential purposes. The annual precipitation during the investigation period was 1,868.9 mm, increasing by 20% from the average annual level of 1,506.7 mm in 2009. The annual average water storage was 57.3%. It decreased during agricultural season and then increased again after monsoon rainfall. The loads of BOD were $3,799kgday^{-1}$, and 81% of them came from livestock and household. The TN and TP loads were $1,164kgday^{-1}$ and $170kgday^{-1}$, respectively, and 76% of them came from livestock. We assessed water quality of the Junam reservoir using 17 variables. According to the result, the reservoir met the fourth grade, meaning slightly bad, because of high concentration of COD, SS and chlorophyll-a. Eutrophication assessment was conducted by revised Carlson's Index (TSIm, Aizaki), and it was found that the entire lake was eutrophicated with high chlorophyll-a concentration all through the year, except during February to April and in July. A total of 76 phytoplankton species were identified from the samples. Among them, the largest number of species were Chlorophyceae with 33 species(43.4%), followed by Bacilliophyceae with 27 species(35.5%), Cyanophyceae with 8 species(10.5%), and Cryptophyceae with species(10.5%). The total cell number of phytoplankton was the highest in October(7,884 cells $mL^{-1}$) among Cyanophyceae and Bacilliophyceae. The seasonal succession of Chlorophyceae (Chlamydomonas spp.), Cyanophyceae(Microcystis aeruginosa) and Cryptophyceae(Rhodomonas spp.) was observed during January to May, July to September and October to December respectively.