• 산업기술연구
• /
• 제36권
• /
• pp.3-7
• /
• 2016

The change of flue gas residence time with the location of air inlet in an incinerator is analysed. An independent numerical variable is the location of air inlet and dependant is the residence time of flue gas. The mean value of turbulence energy in a primary combustion chamber is also analysed. The flow field and the distribution of turbulence energy are investigated to evaluate their influence on the residence time of flue gas and the turbulence energy. As the position of secondary air inlet approaches to the top of primary combustion chamber, the residence time of gas and the turbulence energy become longer and larger respectively.

• 산업기술연구
• /
• 제22권A호
• /
• pp.9-17
• /
• 2002

This analysis is aimed to find out how the conditions of secondary air injection affects the residence time and the turbulence energy of flue gas and flow field in a small incinerator. A commercial code, PHOENICS, is used to simulate the flow field of an Incinerator. The computational grid system is constructed in a cartesian coordinate system In this numerical experiment, an independent numerical variable is the conditions of secondary air injection and dependants are the residence time of flue gas and the mean value of turbulence energy in a primary combustion chamber. The flow field and the distribution of turbulence energy are analysed to evaluate the residence time of flue gas and the turbulence energy The computational results say that the tangential injection of secondary air make the residence time much longer than the radial injection and that the radial injection of secondary make turbulence much stronger than the tangential injection.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2284-2291
• /
• 2006

The present study investigates gas residence time and mixing characteristics for various swirl numbers generated by injection of secondary air into a lab-scale cylindrical combustor. Fine dust particles and butane gas were injected into the test chamber to study the gas residence time and mixing characteristics, respectively. The mixing characteristics were evaluated by standard deviation value of trace gas concentration at different measurement points. The measurement points were located 25 mm above the secondary air injection position. The trace gas concentration was detected by a gas analyzer. The gas residence time was estimated by measuring the temporal pressure difference across a filter media where the particles were captured. The swirl number of 20 for secondary air injection angle of 5$^{\circ}$ gave the best condition: long gas residence time and good mixing performance. Numerical calculations were also carried out to study the physical meanings of the experimental results, which showed good agreement with numerical results.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.19-30
• /
• 2000

The characteristics of NOx emissions in pure hydrogen nonpremixed flames with coaxial air are analyzed numerically for the three model cases of coaxial air flames classified by varying coaxial air velocity and/or fuel velocity. In coaxial air flames, the flame length is reduced by coaxial air and can be represented as a function of the ratio of coaxial air to fuel velocity. Coaxial air decreases flame reaction zone, resulting in reducing flame residence time significantly. Finally, the large reduction of EINOx is achieved by the decrease of the flame residence time. It is found that because coaxial air can break down the flame self-similarity law, appropriate scaling parameters, which are different from those in the simple jet flames, are recommended. In coaxial air flames, the flame residence time based on the flame volume produces better results than that based on a cube of the flame length. And some portion of deviations from the 1/2 scaling law by coaxial air may be due to the violation of the linear relationship between the flame volume and the flame reaction zone.

• 대한기계학회논문집B
• /
• 제30권1호
• /
• pp.48-56
• /
• 2006

We investigated gas residence time and mixing characteristics due to various swirl numbers generated by normal injection of secondary air to a lab-scale cylinderical combustor. The residence time was estimated by measuring the temporal pressure difference which was caused by deposition of test particles on a filter media after the injection by a syringe. The mixing characteristics were evaluated by standard deviation value of test gas concentration at different measuring points. The test gas concentration was detected by a gas analyzer. The swirl number of $20{\sim}30$ for ${\theta}=5^{\circ}$ caused long residence time enough to improve mixing characteristics. Numerical calculations were also carried out to understand physical meanings of the experimental results.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.99-108
• /
• 2007

In this study, the NOx formation characteristics of one-dimensional $CH_4$/Air premixed flame using detailed-kinetic chemistry are examined numerically. The combustor length and the amount of heat loss are varied to investigate the effect of residence time and heat loss on the NOx formation in a post-flame region. In the flame region, NO is mainly produced by the Prompt NO mechanism including $N_2$O-intermediate NO mechanism over all equivalence ratios. However, thermal NO mechanism is more important than Prompt NO mechanism in the post-flame region. In the case of adiabatic condition, the increase of combustor length causes the remarkable increase of NO emission at the exit due to the increase of residence time. On the other hand, NO reaches the equilibrium state in the vicinity of flame region, considering radiation and conduction heat losses. Furthermore the NO, in the case of $\phi$=1.2, is gradually reduced in the downstream region as the heat loss is increased. From these results, it can be concluded that the controls of residence time and heat loss in a combustor should be recognized as an important NOx reduction technology.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.139-148
• /
• 1999

In oder to analyze the effect of operating conditions on pulverized coal combustion, a numerical study is conducted at the pulverized coal combustor. Eulerian approach is used for the gas phase, whereas Lagrangian approach is used for the particle phase. Turbulence is modeled using standard ${\kappa}-{\varepsilon}$ model. The description of species transport and combustion chemistry is based on the mixture fraction/probability density function(PDF) approach. Radiation is modeled using P-l model. The turbulent dispersion of particles is modeled using discrete random walk model. Swirl number of secondary air affects the flame front, particle residence time and carbon conversion. Primary/Secondary air mass ratio also affects the flame front but little affects the carbon conversion and particle residence time. Air-fuel ratio only affects the flame front due to lack of oxygen. Radiation strongly affects the flame front and gas temperature distribution because pulverized coal flame of high temperature is considered.

• 설비공학논문집
• /
• 제29권5호
• /
• pp.220-230
• /
• 2017

In this study we apply and compare a variety of numerical methods for calculating residence time distribution in decay tanks, a major design component in the for reducing N-16 radioactivity. Our research group has used a streamlined method using user-defined particle numbers. However, this streamlined method has several problems, including low exiting particle ratios, particle diminishing, and unphysical time distribution, among others. We utilize three numerical methods to establish residence time and time distribution (streamlined, discrete phase method [DPM], and user defined scalar [UDS]) and subsequently compare the averaged results of each. The three tests demonstrate the flow features within the decay tanks, which are then numerically simulated to enable comparison. We conclude that although each simulation predicts similar time averages, the UDS methodology provides a smoother time distribution and tracer contour plots at specific times.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.171-176
• /
• 1999

To estimate the residence times of aerosols in air, the activities of $^{210}Pb$ and $^{210}Po$ in aerosols were measured at 4 sites in Pusan. All aerosol samples were collected by a high volume air sampler from January to October 1996. The activities $^{210}Pb$ and $^{210}Po$ in Pusan were varied from 11.77 to 67.57 dpm/1000$m^3$ and from 2.63 to 15.91 dpm/1000$m^3$, respectively. The mean activities were 34.62 dpm/1000$m^3$ for $^{210}Pb$ and 8.24 dpm/1000$m^3$ for $^{210}Po$. The highest values of the activities of $^{210}Pb$ and $^{210}Po$ were appeared at P3 site and the lowest values at P4 site. During the sampling period, the trends of the activities of $^{210}Po$ and $^{210}Pb$ were similar to total suspended particulate matter(TSP) concentrations. The mean residence times of atmospheric aerosols calculated from $^{210}Po$/$^{210}Pb$ activity ratio was about 60~80 days in Pusan. The longest residence time of atmospheric aerosols was in January because of the lack of rainout and washout, but the shortest residence time was in August, largely due to scavenging effect by frequent rains. The activities of $^{210}Po$ and $^{210}Pb$ in atmospheric aerosols were different in time and space, which seems that the distribution of $^{210}Po$ and $^{210}Pb$ activities and scavenging processes in air may be controlled by the local and meteorological conditions.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1465-1472
• /
• 2009

완전혼합 반응기에서 외부로의 열손실이 $CH_4/air$예혼합화염의 NOx 생성특성에 미치는 영향을 수치해석으로 검토하였다. 주요 결과로서, 단열조건에서 NOx는 체류시간에 따라 급격히 증가하는 반면에, 열손실이 고려될 때 열전 달 상수와 체류시간의 증가에 따라 NOx 저감현상이 뚜렷하게 발생하였다. 민감도 해석을 통해 열손실율이 증가함에 따라 Thermal NO 기구와 Re-burning NO 기구는 NOx 저감에 크게 기여하는 반면, Prompt NO 기구와 $N_2O$-경유 NO 기구는 오히려 NOx 증가에 기여함을 확인하였다. NOx 생성기구는 열전달 상수 및 체류시간의 변화에 따라 매우 복합한 특성을 갖지만, NOx 농도는 독립된 Thermal NO 기구에 의해 표현될 수 있었다. 이를 통해 실용 $CH_4/air$예혼합 연소기에서 NOx 농도를 예측할 수 있는 열손실율과 체류시간을 조합한 새로운 NOx 상관식이 도출되었다.