• 한국식품영양학회지
• /
• 제20권2호
• /
• pp.218-225
• /
• 2007

This study was conducted to investigate the satisfaction of school dietitians with foodservice facilities and utilities in the Chonbuk area of Korea. Self-administered questionnaires were collected from a total of 22 dietitians. Statistical data analysis was completed using the SPSS v. 10.0 program. The results are summarized as follows. Among the 222 school foodservice systems, 68.5% of the schools prepared meals the conventional way and 31.5% prepared them the commissary way. Most of the school foodservice facilities were located on the first floor. Satisfaction with the location of the foodservice facility was not significantly different between the conventional and commissary systems. However, overall dietitian satisfaction with the foodservice facility locations was poor. Approximately 30% of the dietitians responded that one of the most important problems for foodservice management was the limited space and worn-out equipments in the kitchens. For dietitians' satisfaction on the types of facilities present, most schools had constructed dietitian offices, food storage facilities, cafeterias, rest rooms, dressing rooms, and preparation facilities. Yet, the amenities most often missing were storage facilities, preparation facilities, dressing rooms, rest rooms, etc. For overall satisfaction with the status of facilities and utilities, we found no significant differences between dietitians in the conventional(2.89) and commissary foodservice systems(2.86); however, the satisfaction level among the dietitians was poor. Therefore, governmental regulation agencies need to review and approve plans prior to the new construction or extensive remodeling of school foodservice facilities. Finally, content analysis was also conducted regarding the dietitians' opinions on foodservice facilities and utilities.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.100-108
• /
• 2012

Traffic police officers are faced with many dangerous accidents due to outside duties on roads. Yet, researches on traffic officers' uniforms have mainly been focused on design aspects rather than functional aspects. This study therefore aims to figure out traffic officers' perceived needs for their uniforms and to offer some basic guidelines in manufacturing versatile safety vests for wearers. The study used a documentary survey replied by 236 traffic officers. The results of the study are as follows: 1. There are 10 different types of vests currently used by traffic officers. Vests are employed for purposes such as carrying police equipments, enabling officers to be noticeable in dark, protecting the body, etc. 2. Officers wear these vests which were officially designated by law. Among them, fluorescence versatile safety vests were most frequently worn by officers. 3. Officers who wore ready-made vests of which size was already determined, tended to perceive that the vests were relatively larger than their own size. 4. In terms of the functions of the vests, officers expressed needs for the improvement of the LED and retro-reflection tape along with the addition of thermal function to existing vests. The improvement of the form and functions of versatile safety vests which reflect needs of the users will boost the dignity and the sense of duty of the traffic police officers.

• 한국농공학회논문집
• /
• 제62권5호
• /
• pp.27-37
• /
• 2020

As domestic meat consumption increases, the broiler production industry has been larger and denser. The concentration of particulate matter (PM) and harmful gases generated is also increasing inside livestock house. However, the current research status of PM exposed to farm workers and the health effects are in the early stage. To understand PM concentration affecting workers in the broiler house, field monitoring was conducted according to its size distributions. Concentrations of PM₁₀, PM_2.5, and TD (Total Dust) were monitored using personal air samplers with teflon filter during working and moving periods considering the ventilation systems of 6 broiler houses. The purpose of this study is to monitor the PM concentration in the experimental broiler houses operated by forced ventilation system generally used in Korea and to evaluate the regional concentrations through airflow pattern. The PM concentrations were increased from inlet to outlet vents resulting in 1,872 of TD, 1,385 of PM₁₀, and 209 ㎍/㎥ of PM_2.5, respectively. The TD and PM₁₀ concentrations were increased when the workers and broilers were moving. Among them, the particle size that occupied the largest amount of PM was 13.75 ㎛. These results suggest that personal protection equipments are important to reduce the health effect from PM inhalation.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.685-693
• /
• 2012

Objectives : This research was conducted to find the subjective symptoms of musculoskeletal system for main jobs and job posture. Methods : A survey was conducted from September 15, 2011 to October 7, 2011 and 357 dental hygienists were responded. The survey was consisted of the working environment and medical equipments, psycho-social characteristics, health habits and education, job posture, subjective symptoms of musculoskeletal system pain, and so on. Results : In the survey on the frequency of job posture of dental hygienists by jobs, said they cast down or tilt their head by 15 degrees or more or twist or bend their back. The result of the analysis on the subjective symptoms of musculoskeletal system by main job showed that they experienced a pain in neck, shoulder, and back, although the order differed. The order of subjective symptoms of musculoskeletal system for casting down or turning head by 15 degrees or more, twisting or bending back, having shoulders not parallel to the ground, sitting at the end of a chair, and supporting the whole body with one leg or pressing on a pedal for treatment was from the shoulders to the neck to the back. The order of subjective symptoms of musculoskeletal system for having arms too far from the body or hunching for treatment and bending wrists inward or outward for treatment was from the shoulders to the back to the neck. Conclusions : Due to the characteristics of the job which requires one to have a proper view of a patient's oral cavity, most of the postures included casting down of head or bending of back. Therefore a development of new postures is needed to replace the existing job postures which pressure the musculoskeletal system. And shift rotation can be used as a preventive measure.

• 한국정보통신학회논문지
• /
• 제15권10호
• /
• pp.2079-2086
• /
• 2011

최근 헬스케어 응용 시스템 중의 하나인 자가 진단 시스템 기술의 연구가 활발하게 이루어져 왔다. 이와 함께 본 연구논문은 PC, RFID, 생체신호측정기와 연동된 자가 혈당측정 시스템 및 사용자가 이해하기 쉬운 인터페이스를 구현하는데 있다. 따라서 PC, RFID, 그리고 생체신호측정 센서와 연동되어 손쉽게 자가진단 데이터를 확보할 수 있도록 디바이스와 PC사이의 통신을 위한 손쉬운 인터페이스 구성과 RFID 태그 및 리더기 통신 상태를 분석, 테스트를 수행했다. 즉, 자가 혈당측정 데이터에 대한 통신 프로토콜 수행(프로토콜 정의에 따른 리퀘스트 및 리스폰스 데이터 분석)으로 연월일, 체온 및 혈당수치, 그리고 혈당체크 시점 등 신뢰성 높은 결과가 출력되었음을 나타내었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제6권1호
• /
• pp.44-51
• /
• 2005

To provide more accurate and reliable positioning and timing services to Korean nationwide users, the Ministry of Maritime Affairs and Fisheries of Korea is implementing Korean NDGPS (Nationwide DGPS), which is operational partly. And it also has a plan to construct WADGPS (Wide Area Differential GPS) system using sites and equipments of the NDGPS reference stations. For that, Seoul National University GNSS Laboratory is implementing and testing prototypes of WRS (Wide-area Reference Station) and WMS (Wide-area Master Station). Until now, because there are not enough installed WRSs to be used for computing wide area correction information, we cannot test algorithms of WMS with the data processed actually in WRSs. Therefore to evaluate the performance of the algorithms, we made a MATLAB program which can process RINEX (Receiver INdependent Exchange) format data with WADGPS algorithm. Using that program which consists of WRS, WMS and USER modules, we processed the data collected at NDGPS reference stations, which are saved in RINEX format. In WRS module, we eliminate the atmospheric delay error from the pseudorange measurement, smooth the measurement by hatch filter and calculate pseudorange corrections for each satellite. WMS module collects the processed data from each reference stations to generate the wide area correction information including estimated satellite ephemeris errors, ionospheric delays at each grid point, UDRE (User Differential Range Error), GIVE (Grid Ionosphere Vertical Error) and so on. In USER part, we use the measurements of reference stations as those of users and estimate the corrected users' positions and protection levels (HPL, VPL). With the results of estimation, we analyzed the performance of the algorithms. We assured the estimated UDRE /GIVE values and the protection levels bound the corresponding errors effectively. In this research, we can expect the possible performance of WADGPS in Korea, and the developed modules will be useful to implementation and improvement of the algorithms.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.33-39
• /
• 2005

총구로부터 방출되는 폭발파에 대한 수학적 모델(GUNBLAST)을 수립하였으며, 폭발 하중에 대한 구조 응답 해석을 수행하였다. 폭발파는 자유영역 폭발파와 반사 폭발파로 구분되어질 수 있다. 본 연구에서는 스케일 기법을 이용하여 자유영역 폭발파 모델을 수립하였으며, 경사 충격파 이론과 전산유체역학(Computational Fluid Dynamics) 계산을 통하여 반사 충격파를 계산하였다. GUNBLAST는 두 가지의 구조 모델에 적용되었으며 구조 표면으로부터의 총구거리 변화에 따른 폭발파 특성을 파악하기 위하여 평판에 대한 적용을 통하여 균일하중조건과의 비교를 수행하였다. 또한 MSC/NASTRAN을 이용하여 12.7mm 기총을 장착한 비행기 날개 모델의 과도 응답 해석을 수행하였다. 결과적으로 이러한 폭발파는 랜덤진동과 항공기에 탑재된 장비에 고주파의 손상을 일으킬 수 있음을 확인하였다.

• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.122-129
• /
• 2004

현재 대부분의 리모델링 현장은 시설에 대한 사전정보부족, 공간적인 제약과 같은 예상치 못한 현장조건. 작업범위의 변경 등으로 인해 촉박한 공사기간으로 추진되고 있으며, 이는 조악한 품질의 원인이 되고 있다. 또한 다소 복잡한 작업체계를 가지고 있어 기존시설의 운영일정과 공사일정과의 충돌로 인한 갑작스런 작업대기시간의 발생 등 효율적인 공정관리에도 많은 어려움이 뒤따른다. 따라서 본 연구에서는 실제 리모델링 사례를 통하여 현장관리 절차 및 사례현장에서 나타난 시공관리상 문제점의 개선과정을 통해 리모델링 공사현장의 효율적 관리방안을 제시하는 것을 목적으로 하였다. 관리방안의 수립을 위해 문헌을 통하여 관리상의 문제점을 도출하였고, 사례분석을 통해 공사단계별 현장관리절차, 관리사항을 파악하여 관리상 성공요인을 도출하고, 향후 리모델링 현장에서의 효율적 관리방안을 제시하였다.

• 한국건설관리학회논문집
• /
• 제10권2호
• /
• pp.145-154
• /
• 2009

작업환경 주변의 사물(target object)을 자동으로 인식하고 그 결과를 효과적으로 모델링하는 기술은 작업 품질, 생산성 등 개발 장비의 성능(performance)에도 지대한 영향을 미치게 되므로 이는 건설자동화 장비를 개발함에 있어 필수적으로 요구되는 핵심 요소기술이다. 현재 국내에서는 2006년부터 지능형 굴삭 로봇(intelligent robotic excavator)의 개발을 위하여 토공 작업환경을 대상으로 스테레오 비전을 활용하여 굴삭 로봇 주변 영역의 지반형상을 3차원으로 모델링하기 위한 기술을 개발하고 있다. 본 연구의 목적은 실제 토공 작업환경을 3차원으로 모델링하는 과정에서 필연적으로 발생되는 스테레오 매칭 노이즈를 효과적으로 제거하기 위하여 다양한 토공작업 환경 요소가 포함된 스테레오 영상을 수집하고 토공 작업 환경의 3차원 모델링에 적합한 노이즈 제거 알고리즘을 제안하는 것이다. 본 연구를 통해 개발된 디지털 영상처리 기술은 토공 작업환경을 대상으로 주변을 자동 인식하고 추출하고자 하는 관심의 대상을 3차원으로 모델링해야 하는 굴삭기 이외의 자동화 장비 개발에 있어서도 응용성이 매우 클 것으로 기대된다.

• 디지털융복합연구
• /
• 제14권1호
• /
• pp.189-194
• /
• 2016

최근 카메라, 캠코더 및 CCTV 등의 사용이 활발해지면서 영상 처리 기술의 수요가 급증하고 있다. 특히 키넥트 센서와 같은 깊이(Depth) 카메라를 사용한 3D 영상 기술에 대한 연구개발이 더욱더 활성화되고 있다. 키넥트 센서는 RGB, 골격(Skeleton) 및 깊이(Depth) 영상을 통해 인체의 3D 골격 구조를 실시간 프레임 단위로 획득할 수 있는 고성능 카메라이다. 본 논문에서는 키넥트 센서를 사용하여 인체의 3D 골격 구조를 모션 캡처하고 범용으로 사용되고 있는 모션 파일 포맷($^*.trc$ 및 $^*.bvh$)으로 선택하여 저장할 수 있는 시스템을 개발한다. 또한 본 시스템은 광학식 모션 캡처 파일 포맷($^*.trc$)을 자기식 모션 캡처 파일 포맷($^*.bvh$)으로 변환할 수 있도록 하는 기능을 가진다. 마지막으로 본 논문에서는 키넥트 센서를 사용하여 캡처한 모션 데이터가 제대로 캡처되어졌는지 모션 캡처 데이터 뷰어를 통하여 확인한다.