• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.39-49
• /
• 2018

In the satellite operation phase, a ground station should continuously monitor the status of the satellite and sends out a tasking order, and a satellite should transmit data acquired in the space to the Earth. Therefore, the communication between the satellites and the ground stations is essential. However, a satellite and a ground station located in a specific region on Earth can be connected for a limited time because the satellite is continuously orbiting the Earth, and the communication between satellites and ground stations is only possible on a one-to-one basis. That is, one satellite can not communicate with plural ground stations, and one ground station can communicate with plural satellites concurrently. For such reasons, the efficiency of the communication schedule directly affects the utilization of the satellites. Thus, in this research, considering aforementioned unique situations of spacial communication, the mixed integer programming (MIP) model for the optimal communication planning between multiple satellites and multiple ground stations (MS-MG) is proposed. Furthermore, some numerical experiments are performed to verify and validate the mathematical model. The practical example for them is constructed based on the information of existing satellites and ground stations. The communicable time slots between them were obtained by STK (System Tool Kit), which is a well known professional software for space flight simulation. In the MIP model for the MS-MG problems, the objective function is also considered the minimization of communication cost, and ILOG CPLEX software searches the optimal schedule. Furthermore, it is confirmed that this study can be applied to the location selection of the ground stations.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.694-697
• /
• 2008

A retaining wall system suitable for a construction project is selected on the basis of subsoil conditions. If the decision-maker selects an improper system, it has a negative effect on the cost and schedule of the construction project. There have been many studies related to the models and processes for selecting optimal retaining wall systems. However, engineers who are not familiar with formal analysis methods could not easily utilize the formal methods proposed by previous studies. In order to overcome this problem, we developed a web-based decision support system called Dr. Underground, which is both physically and technically easily accessible by engineers. Dr. Underground was developed based on a selection method developed from a precedent research project. It was developed using a server-side web language ASP.NET and MS Access as a database. Decision-makers can input data about the building's condition, construction site conditions and adjacent site conditions in this system. Based on the input data, Dr. Underground recommends an optimal retaining wall system for the inputted conditions and provides detail information on the system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.132-152
• /
• 2017

Network performance measure has been more and more important in transportation sector because traffic congestion has been steadily increasing in urban area. VKT is defined a sum of traveled distances of whole vehicles on the road network and one of the most important measure of effectiveness (MOE) for network performance measure. This paper aims to propose a methodology for estimating VKT and to apply it to calculate VKT in 6 major cities in Korea. We calculate VKT in 6 major cities by estimating traffic volumes on the uncollected road sections using regression kriging. It is expected that the proposed methodology can be applied various cities.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.179-186
• /
• 2017

Technology forecasting is predict future trend and state of technology by analyzing the results so far of developing technology. In general, a patent has novel information about the result of developed technology, because the exclusive right of technology included in patent is protected for a time period by patent law. So many studies on the technology forecasting using patent data analysis has been performed. The patent keyword data widely used in patent analysis consist of occurred frequency of the keyword. In most previous researches, the continuous data analyses such as regression or Box-Jenkins Models were applied to the patent keyword data. But, we have to apply the analytical methods of discrete data for patent keyword analysis because the keyword data is discrete. To solve this problem, we propose a patent analysis methodology using Bayesian Poisson discrete model. To verify the performance of our research, we carry out a case study by analyzing the patent documents applied by Apple until now.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.364-371
• /
• 2007

Effects of continuous oil phase on silver halide nanoparticles were investigated where nanoparticles were prepared using two different types of water-in-oil(W/O) microemulsions containing silver and halide, respectively. Phase behavior experiments for ternary systems containing AOT surfactant, hydrocarbon oil and aqueous solution of an inorganic salt showed that the region of one phase W/O microemulsion was found to be broadened with an increase in the alkyl chain length of a hydrocarbon mainly due to an increase in hydrophilic nature of a surfactant. With the information of phase behavior experiments, silver halide nanoparticles were prepared using different AOT-based microemulsion systems and photomicrographs obtained by transmission electron microscopy indicated that about 10 nm size particles of relatively spherical shape were obtained. It has been found that an increase in alkyl chain length of a hydrocarbon results in a decrease in particle size because of higher intermicellar exchange rate among microemulsion drops. The average particle size was also found to increase with the inorganic salt composition of initial aqueous solution.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.1-6
• /
• 2008

Individual finger/total grip forces, and subjective preferences for various individual finger grip spans (i.e., four fingers had identical grip spans or different grip spans) were evaluated by using an "Adjustable Multi-Finger Force Measurement (MFFM) System". In this study, three grip spans were defined as follows: a 'favorite grip span' which is the span with the highest subjective preference; a 'maximum grip span' which is the span with the highest total grip force; a 'maximum finger grip span' which is a set of four grip spans that had maximum finger grip forces associated with the index, middle, ring, and little fingers, respectively. Ten males were recruited from university population for this study. In experiment I, each participant tested the maximum grip force with five grip spans (45 to 65mm) to investigate grip forces and subjective preferences for three types of grip spans. Results showed that subjective preferences for grip spans were not coincidence with the performance of total grip forces. It was noted that the 'favorite grip span' represented the lowest total grip force, whereas the 'maximum finger grip span' showed the lowest subjective preferences. The individual finger forces and the average percentage contribution to the total finger force were also investigated in this study. The findings of this study might be valuable information for designing ergonomics hand-tools to reduce finger/hand stress as well as to improve tool users' preferences and performance.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.109-117
• /
• 2008

Compared to the existing PC which uses a mouse and a keyboard, the touchscreen-based portable PC allows the user to use fingers, requiring new operation methods. However, current touchscreen-based web browser operations in many cases involve merely having fingers move simply like a mouse and click, or not corresponding well to the user's sensitivity and the structure of one's index finger, making itself difficult to be used during walking. Therefore, the goal of this study is to develop finger gestures which facilitate the interaction between the interface and the user, and make the operation easier. First, based on the frequency of usage in the web browser and preference, top eight functions were extracted. Then, the users' structural knowledge was visualized through sketch maps, and the finger gestures which were applicable in touchscreens were derived through the Meaning in Mediated Action method. For the front/back page, and up/down scroll functions, directional gestures were derived, and for the window closure, refresh, home and print functions, letter-type and icon-type gestures were drawn. A validation experiment was performed to compare the performance between existing operation methods and the proposed one in terms of execution time, error rate, and preference, and as a result, directional gestures and letter-type gestures showed better performance than the existing methods. These results suggest that not only during the operation of touchscreen-based web browser in portable PC but also during the operation of telematics-related functions in automobile, PDA and so on, the new gestures can be used to make operation easier and faster.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.712-717
• /
• 2011

Recently, diverse schedule management agents are being researched for the efficient schedule management of smart devices users, but they remain at a confirmatory level. In order to efficiently manage user's schedules, execution of planned schedules should be monitored to help users properly execute their schedules, or feedback must be given so that when setting up new schedules, users can plan their schedule according to their schedule establishment patterns. This research proposes a schedule management agent that infers the user's behaviors by using acquired user context, and provides schedule related feedback depending on the user's behavior patterns, when users are executing their schedules or planning new schedules. For this, collected user context information is preprocessed and user's behavior is inferred by Bayesian network. Also, in order to provide feedbacks necessary for confirming the user's schedule execution and new schedule establishment, a context tree pattern matching method for the user's schedule, location and time contexts was applied, then verified with 6 weeks of user simulation in a mobile environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1037-1042
• /
• 2018

The neuromorphic technology has been researched for decades, which learns and processes the information by imitating the human brain. The hardware implementations of neuromorphic systems are configured with highly parallel processing structures and a number of simple computational units. It can achieve high processing speed, low power consumption, and low hardware complexity. Recently, the interests of the neuromorphic technology for low power and small embedded systems have been increasing rapidly. To implement low-complexity hardware, it is necessary to reduce input data dimension without accuracy loss. This paper proposed a low-complexity artificial intelligent engine which consists of parallel neuron engines and a feature extractor. A artificial intelligent engine has a number of neuron engines and its controller to process multimodal sensor data. We verified the performance of the proposed neuron engine including the designed artificial intelligent engines, the feature extractor, and a Micro Controller Unit(MCU).

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.233-237
• /
• 2000

In general. fiber-optic medical endoscopes are made from glass step index (SI) fibers. These endoscopes have limitations in both image quality and mechanical properties. In particular. the image resolution of the SI endoscopes is limited to about 5$\mu$m. In this study the image resolution of plastic graded index (GRIN) super-resolution image guides with pixel sizes from 7 to 2.5 $\mu$m were measured and compared with those of 91ass SI image guides. There is an improvement in resolution of the plastic GRIN image guides as the microfiber diameter is reduced from 7 $\mu$m to 2.5 $\mu$m. The measured resolution of plastic GRIN image guide with 2.5 $\mu$m microfibers is more than a factor of two higher than that of g1ass SI image guide with 5$\mu$m microfibers. This new design of optical systems could have a major impact on a wide array of future optical systems used in defense. industrial, and medical applications.