• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2009

In this parer, we propose a new way of improving DGNSS service using combination of multiple SBAS information. Because SBAS uses Geostationary Earth Orbit (GEO) satellites, it has very large coverage but it can be unavailable in urban canyon because of visibility problem. R. Chen solved this problem by creating Virtual Reference Stations (VRS) using the SBAS signal [1]. VRS converts SBAS signal to RTCM signals corresponding its location, and broadcast the converted RTCM signals over the wireless internet. This method can solve the visibility problem cost effectively. Furthermore it can solve DGNSS coverage problem by creating just a transmitter instead of a reference station. Developing above method, this paper proposes the methods that integrate two or more SEAS signals into one RTCM signal and broadcast it. In Korea, MSAS signal is available even though it is not officially certified for Korean users. As a Korean own SBAS-like system, there is the internet-based KWTB (Korean WADGPS Test Bed) which we developed and released at ION GNSS 2006. As a result, virtually two different SBAS corrections are available in Korea. In this paper, we propose the integration methods for these two independent SBAS corrections and present the test results using the actual measurements from the two systems. We present the detailed algorithm for these two methods and analyze the features and performances of them. To verify the proposed methods, we conduct the experiment using the logged SBAS corrections from the two systems and the RINEX data logged at Dokdo monitoring station in Korea. The preliminary test results showed the improved performance compared to the results from two independent systems, which shows the potential of our proposed methods. In the future, the newly developed SBASs will be available and the places which can access the multiple SBAS signals will increase. At that time, the integration or combination methods of two or more SBASs will become more important. Our proposed methods can be one of the useful solutions for that. As an additional research, we need to extend this research to the system level integration such as the concept of the decentralized W ADGPS.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.317-327
• /
• 2018

Terahertz (THz) time-domain spectroscopy(TDS), imaging techniques, and related systems have become mature technologies, widely used in many universities and research laboratories. However, the development of creative technologies still requires improved THz application systems. A few key points are discussed, including the innovative advances of mode-locking energy-emitting semiconductor lasers and better photoconductive semiconductor quantum structures. To realize a compact, low cost, and high performance THz system, it is essential that THz spectroscopy and imaging technologies are better characterized by semiconductor and nano-devices, both static and time-resolved. We introduce the THz spectroscopy and imaging systems, the OSCAT(Optical Sampling by laser CAvity Tuning) system and the ASOPS(ASynchronous Optical Sampling) system, are constructed by our research team. We report on the THz images obtained from their use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.595-601
• /
• 2018

The era of autonomous vehicles, which drive themselves and in whose operation the driver does not intervene, is fast approaching. The safety of autonomous vehicles can be guaranteed only if they recognize the road infrastructure. However, the road infrastructure consists of road safety facilities, traffic operation systems, and cross-sectional concerns, which include a variety of components, such as types, shapes, and sizes. Therefore, it is necessary to prioritize the road information. This study was conducted to select the priority with which the road infrastructure attributes should be acquired using the AHP (Analytical Hierarchy Process) method. The road infrastructure attributes were categorized into 2 levels, levels 1 and 2, which consisted of 3 and 26 types of attributes, respectively. As a result of the AHP analysis, it was found that the highest priorities of the road infrastructure are the road safety facilities, traffic operation systems and cross sectional concerns. Also, in level-2, the priorities of the safety barriers (road safety facilities), traffic signals (traffic operation systems), and the median (cross sectional) are the highest. Also, this study provides application examples of road infrastructure extraction with the Point Cloud. The results are expected to support the recognition of technology for autonomous vehicles.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.39-47
• /
• 2003

Rockbursts are mainly caused by a sudden release or the stored strain energy in the rock mass. They have been the major hazard in deep hard rock mines but rarely occur in tunnels. Due to the short history and limited information on rockbursts, the topic has rarely been studied in Korea. Some cases of rockbursts, however, have been reported during construction of a mountain tunnel for waterway. This study focuses on analyzing data on rockbursts obtained from a TBM (Tunnel Boring Machine) tunnel and suggests methods for a comprehensive understanding on rockbursts. From the analysis of the field data of rockbursts, it was found that most rockbursts mainly occurred at the section between the tunnel face and the TBM operating room, and the rock bursting phenomena lasted up to 20 days after excavation in certain areas. The data also show that the bursting spots are located all around the tunnel surface including the face, the wall, and the roof, The maximum size of bursting spots is usually less than 100cm. This study also suggests new scale systems of brittleness and uniaxial compressive strength to evaluate the possible tendency for a rockburst. These systems are scaled based on the scale system of strain energy density. In addition, with these scale systems, this research shows that there are potentially higher tendencies for rockbursts in this specific tunnel. Moreover this research suggests that properties of rock and rock mass, RMR (Rock Mass Rating) value, tunneling method, excavating speed, and depth of tunnel have a strong correlation with rockbursts.

• The Journal of Society for e-Business Studies
• /
• v.18 no.2
• /
• pp.279-299
• /
• 2013

The problem of choosing the right product that will best fit a consumer's taste and preferences extends to the field of electronic commerce. However, e-commerce has been able to create a technological proxy for the social filtering process, known as online recommender systems (RSs). RSs aid users in filtering products and decisions on matters relating to personal taste. RSs have the potential to support and improve the quality of the decisions consumers make when searching for and selecting products and services online. However, most previous research on RSs has focused on the accuracy of the algorithms, with little emphasis on user interface and perspectives. This study identified transparency and feedback as possible ways to effectively evaluate RSs from the user's perspective. Thus, this research focused on examining and identifying the roles of transparency and feedback in recommender systems and how they affect users' attitudes toward the system. Results of the study showed that both transparency and feedback positively and significantly affected perceived trust, perceived value of the process, and perceived enjoyment. Furthermore, we found that perceived trust, perceived value of the process, and perceived enjoyment positively and directly affected users' intentions to use/reuse a recommender system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.82-91
• /
• 2020

Recently, the research and development of weapon systems have expanded from ILS centered on acquisition costs to LCS, including operating maintenance costs. Regulations define the provision and formula of operating maintenance costs, but this does not consider the characteristics of the design and operation/maintenance of real weapon systems based on engineering calculations. Therefore, this study suggests a simulation design method to complement these areas and produce more accurate operating maintenance costs. The research procedures are as follows. First, the provision and formula of operating maintenance costs were defined to make the simulation results applicable. Second, a simulation model was developed by reviewing design considerations so that the simulation results reflect reality more accurately. The design considerations include the PBS of weapon systems, operation schedules, specifications for operation/maintenance/warehouse facilities, and basic cost information (personnel expense and spare part/equipment cost). This study is expected to be effective in calculating the operating maintenance costs more easily and accurately.