• Korean Journal of Human Ecology
• /
• v.24 no.6
• /
• pp.847-857
• /
• 2015

The ratio of small-breasted women occupies over 20% among Korean women in their twenties. However, the commercial brassieres for the small-breasted women were not fitted well to their breast shapes. In this research, the various commercial mold brasseries for small-breasted women were evaluated through the wearing test and the analysis of 3D images which were scanned from their torsos wearing the brassieres. In addition, professional panels performed the appearance evaluation based on the 2D front and side images captured from 3D images taken by 3D measurement systems. As the results, we found that small-breasted women preferred a 3/4 cup brassiere, of which volume is concentrated in the lower cup. The most preferred brassiere in wearing state shows that the characteristic angle between the chest and the upper cup is about 167 degrees, which is smaller than those of another brassieres, and that the ratio of the radius of curvature of the nipple part to that of the lower cup was about 0.78. These results provide important implications regarding the design of mold brassieres for small-breasted women in spite of the fact that these results represent the selected set of commercial brassieres. Therefore, further studies are highly demanded for the most suitable design information of mold cup for small-breasted women.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.259-259
• /
• 2010

Periodically polarity inverted (PPI) ZnO structures on (0001) Al2O3 substrates are demonstrated by plasmas assisted molecular beam epitaxy. The patterning and re-growth methods are used to realize the PPI ZnO by employing the polarity controlling method. For the in-situ polarity controlling of ZnO films, Cr-compound buffer layers are used.[1, 2] The region with the CrN intermediate layer and the region with the Cr2O3 and Al2O3 substrate were used to grow the Zn- and O-polar ZnO films, respectively. The growth behaviors with anisotropic properties of PPI ZnO heterostructures are investigated. The periodical polarity inversion is evaluated by contrast images of piezo-response microscopy. Structural and optical interface properties of PPI ZnO are investigated by the transmission electron microcopy (TEM) and micro photoluminescence ($\mu$-PL). The inversion domain boundaries (IDBs) between the Zn and the O-polar ZnO regions were clearly observed by TEM. Moreover, the investigation of spatially resolved local photoluminescence characteristics of PPI ZnO revealed stronger excitonic emission at the interfacial region with the IDBs compared to the Zn-polar or the O-polar ZnO region. The possible mechanisms will be discussed with the consideration of the atomic configuration, carrier life time, and geometrical effects. The successful realization of PPI structures with nanometer scale period indicates the possibility for the application to the photonic band-gap structures or waveguide fabrication. The details of application and results will be discussed.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.971-980
• /
• 2002

As the importance of knowledge management is being recognized, there is a significant amount of increase for interest in data warehousing. On-Line Analytical Processing (OLAP) systems can effectively make use of data warehouses. Although there are many commercial OLAP products, they have been developed without any kind of standard resulting in poor data exchange and difficulty in interfacing among the OLAP products. In this paper we propose an OLAP metadata interchange model that can be used among different OLAP products and have implemented an OLAP metadata interchange system that can interchange the cubes created from the metadata. XML is used for the OLAP metadata model and the user interface is Web-based, which makes it easier to interchange metadata among different OLAP products. Users can experience the different analysis environments of different products without the need to learn the complex cube creation process for each product. By extending this research to design a common query language that can be used among OLAP products, OLAP products should be able to more easily talk to one another.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.6
• /
• pp.324-332
• /
• 2005

In general, bus system consumes a very significant portion of power in a chip. Bus splitting can be used to reduce the energy dissipation and to reduce the Propagation delay on the bus by lowering the parasitic load of each bus segment. Data exchange probability distribution between a set of interconnected processing elements affects the average energy dissipation of the splitted bus architectures. In this research, we have developed tree-based bus splitting techniques and design methodologies, as an extension of horizontally aligned bus splitting. We have developed the methodology to select near-optimal bus architectures for low energy dissipation when data exchange probability distribution of a system is given. Experimental results show that the proposed techniques can reduce energy dissipation on the bus by up to 83$\%$.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.4
• /
• pp.362-372
• /
• 2000

The causal message logging is a low-cost technique of building a distributed system that can tolerate process crash failures. Previous research in causal message logging protocol assumes that the number of processes in a fault-tolerant system is fixed. This assumption makes all processes modify their data structures when a new process is added or an existing process terminates. However, the proposed approach in this paper allows to each process retain identifiers of only the communicating processes instead of all processes. This mechanism enables the fault-tolerant system to operate at many different scales. Using this mechanism, we develop a new algorithm that can be adapted for recovery in existing causal message logging protocols. Our recovery algorithm is 1) a distributed technique which does not require recovery leader, 2) a nonblocking protocol which does not force live processes to block while recovery is in progress, and 3) a novel mechanism which can tolerate failures of an arbitrary number of processes. Earlier causal message logging protocols lack one or more of the above properties.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.427-433
• /
• 2015

The rapid advancement of computing technology has triggered the need for fast data I/O processing and high-performance storage technology. Next generation memory technology, which we refer to as new memory, is anticipated to be used for high-performance storage as they have excellent characteristics as a storage device with non-volatility and latency close to DRAM. This research proposes NTL (New memory Translation layer) as a technology to make use of new memory as storage. With the addition of NTL, conventional I/O is served with existing mature disk-based file systems providing compatibility, while new memory I/O is serviced through the NTL to take advantage of the byte-addressability feature of new memory. In this paper, we describe the design of NTL and provide experiment measurement results that show that our design will bring performance benefits.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.4
• /
• pp.111-116
• /
• 2015

This study aims to examine the field of UI/UX being actively adopted in this new media age, investigate and analyze homepages targeting national universities in Korea, and attempt diverse researches on UI/UX applied to mobile webs. First of all, the paper comparatively analyzed PC webs, mobile webs, and mobile apps, investigated the current status of Korean national university homepages, comparatively examined the expressions and use of PC webs and mobile webs in those universities, and analyzed to what extent a certain university's mobile web was applied to the principle of UI/UX. According to the result of this research, most of the mobile web pages considerably lack in user-oriented design applying UI/UX, and it will be needed to optimize a vast amount of data on PC webs for better expression. Moreover, this study intends to figure out ways to apply user experience to be applied to mobile web design by suggesting directions for UI/UX design.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2016

One of the most important aspects of the research on multi-agent systems is the definition of agent communication languages(ACLs) and the specification of a proper formal semantics of ACLs. In this paper, we propose an illocutionary effect-based FIPA-ACL semantics which overcomes the two traditional semantic approaches. The key idea of this new semantics is based on the semantic concepts of success and satisfaction conditions of illocutionary acts in speech act theory, and the common ground theory-based framework. As case studies using this new semantics, we define the primitive speech acts of FIPA-ACL such as inform and request. For the strengths of the proposed approach we illustrate our new semantics on an e-commerce agent purchase negotiation. Also, we compare this approach with two traditional semantic approaches for ACLs.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.27-34
• /
• 2013

IT has been receiving increasing attention for cloud computing services. However, despite a lot of attention, there are limitations of existing research on cloud computing services. There are researches respectively about the benefits and costs that would occur if you choose a cloud computing services. However, in real life, consumers should be considered about the benefits and costs at the same time if they choose and use a cloud computing service. Therefore, this study examines the interaction effect of benefits and costs on cloud computing service. The findings demonstrate that three independent variables(usefulness, social influence, and innovativeness) positively(+) affect the perceived value. However, showed the benefits and costs of interaction effects analysis, usefulness and innovation on the cost influence the perceived value in statistics. The interaction of the usefulness & cost shows negative(-) effect and the interaction of the innovativeness & cost has positve(+) effect on the perceived value. In conclusion, this study provide that consumers need to consider costs with benefits when they use a cloud computing service.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.127-137
• /
• 2010

As large-scale computational applications in various scientific domains have been utilized over many integrated sets of grid computing resources, the difficulty of their execution management and control has been increased. It is beneficial to refer job history generated from many application executions, in order to identify application‘s characteristics and to decide selection policies of grid resource meaningfully. In this paper, we apply a statistical technique, Plackett-Burman design with fold-over (PBDF), for analyzing grid environments and execution history of applications. PBDF design identifies main factors in grid environments and applications, ranks based on how much they affect to their execution time. The effective factors are used for selecting reference job profiles and then preferable resource based on the reference profiles is chosen. An application is performed on the selected resource and its execution result is added to job history. Factor's credit is adjusted according to the actual execution time. For a proof-of-concept, we analyzed job history from an aerospace research grid system to get characteristics of grid resource and applications. We built JARS algorithm and simulated the algorithm with the analyzed job history. The simulation result shows good reliability and considerable performance in grid environment with frequently crashed resources.