• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.151-157
• /
• 2018

Among the various sensors for measuring traffic, PVDF (polyvinylidene fluoride) piezoelectric sensors are used to classify vehicles because they can detect the axle of the vehicle. Piezoelectric sensors are embedded in road pavements and are always exposed to traffic loads and environmental loads. Therefore, the life expectancy is very short, less than 6 years. Traffic control is essential for reinstallation and data collection is interrupted during the failure period. The lifespan will increase if the sensor installation depth is increased. In this study, the sensor signal output was analyzed with a variable depth of sensor installation to verify the possibility of deeper installation. Furthermore, various parameters, such as the weight and speed, were analyzed. The wheel load is applied using APT. As a result, the MSI BL sensor output signal is higher than 100mV when installed at 3cm, which is reliable. If the location of the sensor is deeper in the pavement, the expected lifetime of the sensor is also increased. On the other hand, the MSI cable was found to be less than 100mV at the shallowest depth of 1cm, making it impossible for field applications.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.444-449
• /
• 2019

The "Standard on Cargo Stowage and Securing" implemented to safely stow and secure the cargo of international shipping vessels and domestic car ferries, has also been applied to general cargo ships transported between domestic ports since J anuary 2018. As a result, a new type of cargo, such as a non-standardized steel box transported by general cargo ships to major ports in Korea from Jeju Island in Korea, must be factored as the method of safe stowage and securing according to the legal classification of cargo. This study analyzed the legal status of a steel box by analyzing the actual size, shape of steel box through field verification, collection of data from relevant agencies and finally proposed the methods of safe stowage and securing for a steel box in the cargo holds of general cargo ships. According to the relevant domestic laws and international regulations, steel boxes could be classified as pallette boxes with protective outer packing, a type of non-standardized cargo. Additionally, when a steel box is loaded into the cargo hold of general cargo ships, a method of loading and transporting them must be factored so that there is no gap in the cargo hold of ships. Verification of the safety of the tightly loading and transportation measures in the reviewed cargo hold was verified through safety of the hull structure and securing of the ship's stability. As a result of verification of the safety of the hull structure, the value of the structural strength on both sides and the floor of the cargo hold for the total weight of cargo that can be loaded in the cargo hold was satisfied, and the value of the ship's stability was satisfied with the value of GoM and the restoration of the three cross-sectional stability curve areas.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.145-164
• /
• 2014

Nuclear fusion is one of the most promising options for generating large amounts of carbon-free energy in the future. Major countries such as China, EU, and Japan have established a national plan for DEMO construction and they are implementing it. Korea has started a nuclear fusion research and development by the KSTAR project started in 1995. There are matured needs for a full-scale research and development initiatives to ensure competition with the major countries for DEMO as well as achieve the final goal to commercialize fusion energy. In this paper, we apply the TRL and AHP methods in order to identify the key technologies to conduct DEMO R&D. We propose the priorities of future R&D on DEMO by deriving a core technology in the field. At first, we review the scientific theory of fusion and trend of progress of DEMO activities in major countries. For previous studies, we review TRL and AHP methods to examine the technology classification system of DEMO and identify key technologies. We apply TRL method to identify readiness level of DEMO technologies and AHP to compensate shortcoming of TRL. The key technologies of DEMO to be secured from a synthesis result of the TRL and AHP are burning plasma, plasma facing material, structural material, high frequency heating, neutral particle beam, safety, plasma diagnostic, and simulation technologies.

• Journal of Wetlands Research
• /
• v.16 no.4
• /
• pp.319-325
• /
• 2014

A lot of Pond Wetland (Palustrine Wetland) are distributed in agricultural landscapes, Korea. These wetlands are evaluated as important resources for conservation of biodiversity. However, the study of Pond Wetland is rarely conducted except type classification in Korea. In this study, the function of pond wetland as ecosystem services is studied for conservation and utilization of wetland. Research was conducted in three steps; functionality analysis, functionality derivation, and importance analysis. A total of 22 features were derived by analyzing the previous studies. As a result of expert survey, 4 features were selected by each in the field of biological, environmental, and socio-culture among the 22 features. Importance was calculated by conducting a cross-functional features using Analytic Hierarchy Process (AHP). Finally, 10 ecosystem service functions of pond wetland were derived through expert survey; (1) Water Storage & Irrigation, (2) Vegetation Diversity, (3) Amphibian & Reptile Habitat, (4) Water Purification, (5) Aquatic Insect Habitat, (6) Nutriments Control was derived, (7) Groundwater Recharge, (8) Fishery Habitat, (9) Eco-Experience & Education, and (10) Aesthetic landscape. It is expected that this study is able to utilize in evaluation of pond wetlands ecosystem services by further study on analysis of functional importance and economic value index.

• Journal of Korean Medical classics
• /
• v.9
• /
• pp.381-429
• /
• 1996

Choo-Joo(鄒澍;1790-1844) was the medicine scholar who lived in the late peroid of the Chung-Dynasty and wrote "Bon-Kyung-So-Jeung(本經疏證)", "Bon-kyung-Sok-So(本經續疏)", "Bon-Kyng-Seo-So-Yo(本經序疏要)". In the books mentioned above, He annotated the chief effectiveness of herbal medicine(本草) which had been presented on "Shin-Nong-Bon-Cho-Kyung(神農本草經)" and "Myoung-Eui-Byul-Lok(名醫別錄)". He defined medical action of 315 herb-items with the many theories of various scholars. Scholars whom Choo-Joo has qoutated belong to the school of study of Chinese classics, and they have regarded "Hwang-Je-Nae-Kyung(黃帝內經)", "Shin-Nong-Bon-Cho-Kyung(神農本草經)" and "Sang-Han-Lon(傷寒論)" as great important cannon and have lived during the Myoung Chung Dynasty. The distinctive character of Choo-Joo belongs to similar academic traditions. It seems that he was appected mainly by "Bon-Cho-Gang-Mok(本草綱目)" written by Lee-Si-Jin(李時珍), Mok-Jung-Soon(繆仲淳)'s "Sin-Nonng-Bon-Cho-Kyung-So(神農本草經疏)", You-Yak-Guem(劉若金)'s "Bon-Cho-Sul(本草述)" and Yang-Si-Tae(楊時泰)'s "Bon-Cho-Sul-Gu-Won(本草述鉤元)". He contributed in two big sides. First, Choo-Joo(鄒澍) have achieved much contribution in biliographical study of Chinese classics(考證學). He analyzed the medical theory of herb-medicine, combining with "Nae-Kyung(內經)", "Sang-Han-Lon(傷寒論)" and many theory of various scholars in order to make research on the chief effectiveness that had been presented in "Shin-Nong-Bon-Cho-Kyung(神農本草經)". Therefore the practical application of medical theory and term which had been represented on classics were offered. Secondary, Choo-joo did great accomplishment in pharmacology. The point of his theory was grasping the effect of a medicine through distinctive one beyond general feature. He set up standards that grasp distintive feature as form, color, energy and taste, place of production and temper. And on the basis of these standards he investigated distinctive feature on various fields, then he induced 'the Uem-Yang-0-Haeng Theory(陰陽五行說)' from distictions. According to the these method of classification, form(形) stand for the resultant shape of herbal function, color(色) represent the active direction of herb, energy and taste(氣味) imply the ultimate active function of herb, the place of production(産地) and the period of occurrence(發生時期) symbolize symptoms. When he applied these method to seek for effetiveness, he regarded the field which revealed most representative feature as of great importance, and Combining remained distinctions with one another, he determined more accurate medicinal value. These method of obsevation solved contradiction which occured by equaly appling all medical herbs for the regular standard. The most important theory that represented in Choo-Joo(鄒澍) is to induce and to certify the distintive feature of herb into the 'Uem-Yang-0-Haeng Theory'. That is, concluded as "spring(生), growing(長), change(化), collecting(收) and storing(藏)". As the results of these studies, he made clear the action of medicine more concretly and made 'the Uem-Yang-0-Haeng Theory(陰陽五行說)' more concret and actual for applying. And he contrbuted to establish the standard for grasping the effect of medicines.

• Journal of architectural history
• /
• v.24 no.3
• /
• pp.43-56
• /
• 2015

Researches on the pit dwellings in the Joseon Dynasty era have been constantly conducted in the archeology field since the beginning of the 2000s. Most of the related researches in the past have been on the classification and chronological record of dwelling types in archeology, but architectural researches on the dwelling history that is connected from the prehistoric age to the Joseon Dynasty era are insufficient. There are no big differences between the excavated pit dwellings of the Joseon Dynasty era and those of the prehistoric age, so pit dwellings were considered to have been used as dwellings for common people until the Joseon dynasty era. This fact is confirmed by the frequency and density of pit dwellings. In this research, what space composition of the pit dwellings that are equipped with the Korean floor heating system is shown according to the plan types was examined and the development and transition process from pit dwellings to Folk houses were analyzed and their correlations with the Folk houses of the Joseon Dynasty era were examined. The Folk house form did not start with the form of the house on the ground but originate from the introduction of Ondol, the Korean floor heating system, to pit dwellings. As the Korean floor heating system is used, the room and kitchen space are composed in the pit dwelling, and the kitchen is expanded to the one that separates the fireplace for cooking to avoid heating that is unnecessary for the summer season. As the size of the dwelling was getting bigger, the division of the space is made by the pillars that support the interior space. Also, the dwelling is expanded into a single row house and a double row house according to the progress direction of Ondol. In other words, the pit dwellings in the Joseon Dynasty era develops with making up diverse floors through the combination and expansion of Ondol and kitchen according to the dweller's convenience and life style and surrounding environment. This research is significant in the sense that it helps understand the formation and development process of our traditional Folk houses and fills the gap between the pit dwellings, which have been dealt with inadequately, and traditional Folk houses in the Korean dwelling history.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.321-333
• /
• 2019

A primary aspect of low impact development (LID) design that affects performance efficiency, maintenance frequency, and lifespan of the facility is the type of filter media as well as the arrangement or media profile. Several LID guidelines providing media specifications are currently available and numerous studies have been published presenting the effectiveness of these systems. While some results are similar and consistent, some of them still varies and only a few focuses on the effect of filter media type and arrangement on system performance. This creates a certain level of uncertainty when it comes to filter media selection and design. In this review, a synthesis of filter media specifications from several LID design guidelines are presented and relevant results from different laboratory and field studies are highlighted. The LID systems are first classified as infiltration or non-infiltration structures, and vegetated or non-vegetated structures. Typical profiles of the media according to classification are shown including the different layers, materials, and depth. In addition, results from previous studies regarding the effect of filter media characteristics on hydraulic and hydrologic functions as well as pollutant removal are compared. Other considerations such as organic media leaching, clogging, media washing, and handling during construction were also briefly discussed. This review aims to provide a general guideline that can contribute to proper media selection and design for structural LIDs. In addition, it also identifies opportunities for future research.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.100-109
• /
• 2017

This study was conducted for preliminary survey and management support for Pine Wood Nematode (PWN) suppression. We took areal photographs of 6 areas for a total of 2,284 ha during 2 weeks period from 15/02/2016, and produced 6 ortho-images with a high resolution of 12 cm GSD (Ground Sample Distance). Initially we classified 423 trees suspected for PWN infection based on the ortho-images. However, low accuracy was observed due to the problems of seasonal characteristics of aerial photographing and variation of forest stands. Therefore, we narrowed down 231 trees out of the 423 trees based on the initial classification, snap photos, and flight information; produced thematic maps; conducted field survey using GNSS; and detected 23 trees for PWN infection that was confirmed by ground sampling and laboratory analysis. The infected trees consisted of 14 broad-leaf trees, 5 pine trees (2 Pinus rigida), and 4 other conifers, showing PWN infection occurred regardless of tree species. It took 6 days for 2.3 men from to start taking areal photos using UAV (Unmanned Aerial Vehicle) to finish detecting PNW (Pine Wood Nematode) infected tress for over 2,200 ha, indicating relatively high efficacy.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.4
• /
• pp.27-36
• /
• 2015

Purpose: Of late, the focus of service design is moving toward emphasizing customer satisfaction and taking users' experience more seriously. In addition to the change in perspective in service design, scholars in this area are paying more attention to service design methodology and process, as well as its theory and real-world case studies. In the case of medical space, there have been few studies in attempting to apply service design methods useful for deriving user-focused results. The author of this paper believes, however, case study-oriented approaches are more needed in this area rather than ones focusing on theoretical aspects. The author hopes thereby to expand the horizon to practical application of spatial design beyond service design methodology. Methods: In order to incorporate the strengths of service design methodology that can reflect a variety of user opinions, this study will introduce diverse tools in the framework of double diamond process. In addition, it will present field cases that successfully brought about best results in medical space design. It will end with summarizing the ideal process of medical space design which is reasonable and comprehensive. Results: Medical service encompasses preventive medicine as well as treatment of existing medical conditions. A study in establishing the platform of medical service design consists of a wide range of trend research, followed by the summary of two-matrix design classification based on results of the trend research. The draft of design process is divided into five stages composed of basic tools for establishing spatial flow lines created by matching service design tools with each stage of space design processes. In all this, most important elements to consider are communication and empathy. When service design is actually applied to space design, one can see that output has reflected the users' needs very well. The service design process for user-oriented medical space can thus be established by interactions on the final outcome and feedback on the results. Implications: One can see that the service design with the hospital at its center produces the result that encompasses the user's needs best. If the user-focused service design process for medical space can be extended to other space designs, the author believes that it would enhance the level of satisfaction for users and minimize trials and errors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.469-476
• /
• 2021

An electronic attack (EA) system is an essential weapon system for performing electronic warfare missions that contain signal tracking and jamming against multiple threats using electromagnetic waves, such as air defense radars, wireless command and communication networks, and guided missiles. The combat effectiveness can be maximized, and the survivability of militarily protecting combat power can be enhanced through EA mission operations, such as disabling the functions of multiple threats. The EA system can be used as a radio frequency jamming system to respond to drone attacks on the core infrastructure, such as airports, power plants, and communication broadcasting systems, in the civilian field. This study examined the criteria for classification according to the electronic attack missions of foreign EA systems based on an aviation platform. The foreign R&D trends by those criteria were investigated. Moreover, by analyzing the R&D trends of domestic EA systems and future battlefields in the domestic security environments, this paper proposes technological development plans of EA systems suitable for the future battlefield environments compared to the foreign R&D trends.