• Korean Journal of Environment and Ecology
• /
• v.36 no.6
• /
• pp.592-602
• /
• 2022

This study aimed to check habitat distribution and analyze influencing factors by analyzing the mating calls of Auritibicen intermedius inhabiting limited locations in South Korea by applying bioacoustic detection techniques. The study sites were 20 protection areas nationwide. The mating call analysis period was 4 years from 2017 to 2021, excluding 2020. The bioacoustic recording system installed at each study site collected recordings of mating calls every day for 1 minute per hour. Climate data received from the Meteorological Agency, such as temperature, humidity, rainfall, cloudiness, and sunshine, were analyzed. The results of this study identified A. intermedius habitat only in four national parks in the highlands of Gangwon Province (Mt. Seorak, Mt. Odae, Mt. Chiak, and Mt. Taebak) out of 20 study sites. During the four years of study, the mating call period of A. intermedius was between August 5 and September 28, and the duration of the mating call was 31 to 52 days. The temperature analysis during the appearance period of A. intermedius showed that A. intermedius mainly produced mating calls at temperatures between 13.1℃ and 35.3℃, and the average temperature during the circadian cycle of mating calls (09:00 to 16:00) was 24.4 to 24.9℃. The analysis of the circadian cycle of mating calls at four study sites where A. intermedius appeared in 2019 showed that A. intermedius produced mating calls from 06:00 to 16:00 and that they peaked around 11:00 to 12:00. During the appearance period of A. intermedius, four species appeared in common: Hyalessa maculaticollis, Meimuna opalifera, Graptopsaltria nigrofuscata, and Suisha coreana. A logistic regression analysis confirmed that sunlight was the environmental factor affecting the mating call of A. intermedius. Regarding interspecific influence, it was confirmed that A. intermedius exchanged interspecific influence with 4 other common species (H. maculaticollis, M. opalifera, G. nigrofuscata, and S. coreana). The above results confirmed that A. intermedius habitats were limited in the highlands of Gangwon Province highlands in Korea and produced mating calls at a lower temperature compared to other species. These results can be used as basic data for future research on A. intermedius in Korea.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.28 no.2
• /
• pp.63-93
• /
• 2023

This study aims to examine the history of naming the strait between the Yellow and East China Seas and the East Sea to suggest a consistent nomenclature and to demarcate the geographic region of the strait. Although the strait is internationally known as 'Korea Strait', it is commonly referred to as the 'South Sea' in Korean common usage. This review ultimately recommends the use of 'Korea Strait' as an appropriate geographical name for this area. To support this recommendation, the historical boundaries typically assigned to the Korea Strait were investigated. We also analyzed the evolution of geographical labels assigned to Korea Strait and to the Western and Eastern Channels (labels given to the two maritime areas surrounding Tsushima). Resources for this analysis included historic maps and charts, International Hydrographic Organization Special Publications (S-23), and maps published in the Ocean Science Journal (OSJ) and Journal of Oceanography (JO), which are two international journals representing Korean and Japanese sources, respectively, from 2005 to 2021. In these two international journals, the most frequently used names assigned to the strait of interest were Korea Strait (appearing 42.9% of OSJ maps, and 7.5% of JO maps), and Tsushima Strait (appearing 60.4% of JO maps, and 0% of OSJ maps). Other names were South Sea and Korea Strait/Tsushima Strait. On maps in the two reviewed journals, the boundaries of Korea Strait were defined explicitly or implicitly in five different ways: a broad region between the Yellow and East China Seas and Ulleung Basin (Type 1), the region between Ulleung Basin and Tsushima (Type 2), the western channel of the strait (Type 3-1), the eastern channel of the strait (Type 3-2), and both the western and eastern channels of the strait (Type 4). Overall, Type 1 was the most frequently used boundary, taking up 71.4% of OSJ and 60.4% of JO maps. Lastly, we suggest in this paper that the current flowing through Korea Strait from the East China Sea to the East Sea should be labeled the 'Korea Strait Warm Current' to indicate its full path through the strait. Currently, this current is internationally referred to as the 'Tsushima Warm Current', which does not link well to the commonly used geographic name of the strait.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.885-894
• /
• 2006

The purpose of this study is focused on the development of the effective classification technique using ultra multiband of hyperspectral image. This study suggests the classification technique using canonical correlation analysis, one of multivariate statistical analysis in hyperspectral image classification. High accuracy of classification result is expected for this classification technique as the number of bands increase. This technique is compared with Maximum Likelihood Classification(MLC). The hyperspectral image is the EO1-hyperion image acquired on September 2, 2001, and the number of bands for the experiment were chosen at 30, considering the band scope except the thermal band of Landsat TM. We chose the comparing base map as Ground Truth Data. We evaluate the accuracy by comparing this base map with the classification result image and performing overlay analysis visually. The result showed us that in MLC's case, it can't classify except water, and in case of water, it only classifies big lakes. But Canonical Correlation Classification (CCC) classifies the golf lawn exactly, and it classifies the highway line in the urban area well. In case of water, the ponds that are in golf ground area, the ponds in university, and pools are also classified well. As a result, although the training areas are selected without any trial and error, it was possible to get the exact classification result. Also, the ability to distinguish golf lawn from other vegetations in classification classes, and the ability to classify water was better than MLC technique. Conclusively, this CCC technique for hyperspectral image will be very useful for estimating harvest and detecting surface water. In advance, it will do an important role in the construction of GIS database using the spectral high resolution image, hyperspectral data.

• Korean Journal of Environment and Ecology
• /
• v.37 no.2
• /
• pp.100-139
• /
• 2023

This study was intended to identify the distribution and characteristics of plants such as native plants, rare plants, and endemic plants through a flora survey in Sangwangsan Mt. (644m), Wando-gun, Jeollanam-do, a group habitat of warm temperate forests in Korea, and use the data for the conservation of plant species diversity and the study of climate and distribution changes in warm-temperate forests. A total of 32 field surveys were conducted from 2018 to 2022. The survey identified 785 taxa, including 8 forms, 53 varieties, 16 subspecies, 708 species, 473 genera, and 132 families. The endangered wild plants designated by the Ministry of Environment included 6 taxa: Woodwardia japonica, Metanarthecium luteoviride, Bulbophyllum inconspicuum, Dendrobium moniliforme, Pelatantheria scolopendrifolia, and Cymbidium macrorhizon. Rare plants designated by the Korea Forest Service were identified as 26 taxa. The red list designated by the Korea National Arboretum was identified as 7 taxa, the red list designated by the Ministry of Environment was identified as 29 taxa, and endemic plants in Korea were identified as 17 taxa. Floristic target species in Korea were identified as 200 taxa, specifically 6 taxa of grade V, 13 taxa of grade IV, 73 taxa of grade III, 29 taxa of grade II, and 79 taxa of grade I. Naturalized plants were identified as 73 taxa, and invasive alien plants were identified as 6 taxa. Target plants adaptable to climate change in Korea were identified as 55 taxa, specifically 8 taxa of endemic plants, 46 taxa of southern plants, and 1 taxon of northern plants.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.41-51
• /
• 2010

In this study, runoff simulation was carried out in the area of Bisan 7-dong, Seo-gu, Daegu as drainage basin and the effects of the installation of underground storage facilities were analyzed during heavy rainfall. SWMM model was used for the runoff and pipe network analysis on Typhoon Maemi, 2003. 2-D inundation analysis model based on diffusion wave was employed for inundation analysis and to verify computed inundation areas with observed inundation trace map. The simulation results agree with observed in terms of inundation area and depth. Also, the effects of flood damage mitigation were analyzed through the overflow discharge and 2-D inundation analysis, depending upon whether the underground storage facility is installed or not. When the underground storage facility ($W:120m{\times}L:180m{\times}H:1.7m$) is installed, volume of overflow could be reduced by 72% and flooding area could be reduced by 40.1%. When the underground storage facility ($W:120m{\times}L:180 m{\times}H:2.0m$) is installed, volume of overflow could be reduced by 84.8% and flooding area could be reduced by 50.6%. When the underground storage facility ($W:120m{\times}L:180m{\times}H:2.2m$) is installed, volume of overflow could be reduced by 94% and flooding area could be reduced by 91.2%. There is no overflow of manhole, when the height of storage facility is 2.5 m. It is expected that the study results presented through quantitative analysis on the effects of underground facilities can be used as base data for socially and economically effective installation of underground facilities to prevent flood damage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.279-323
• /
• 2019

The musical characteristics of Fishing songs in North Korean which recorded on Anthology of North Korean Folk Songs were examined in this paper. The results are as follows. Among Fishing songs in North Korea, there are "Rowing Song," the "Song for Hauling Nets," and the "Song for Picking Up Fish" in songs related to walleye pollack fishing and in songs related to croaker fishing, the "Song for Dropping Anchor" and the "Full-Load-of-Fish Song" in songs related to croaker fishing, the "Song for Weighing Anchor," the "Song for Shaking Fish," the "Full-Load-of-Fish Rowing Song," and the "Song for Hanging Walleye Pollack" in songs related to walleye pollack fishing. There are the "Song for Setting a sail" and the "Song for catching shells" in Fishing songs in North Korea, too. In the rhythmic elements of Fishing songs in North Korea, the tempo of the "Songs for Setting a sail" is moderato, and that of the "Songs for Picking Up Fish" of songs related to anchovy or herring fishing is quite slow. "Rowing Songs"(croaker fishing) have various tempos but faster than moderato, and usually get faster and faster as time goes by. Most songs have 4/♩. time and there are some of 2, 3 or 5 time. Some songs use irregular time or 6 time overlapping 2 beats. The mode Menari is the most common tonal system used in fishing songs of North Korea. And the mode Susimga, the mode Changbutaryeong, the mode Nanbongga, and the mode Odolttogi are also used in the tonal system of Fishing songs in North Korea. There are shoutting intonations that have indefinite pitch, too. Modulation or interaction by the mode Changbutaryeong appeared in songs of the mode Menari. There is a tendency to favor a certain tonal system by category. Responsorial form is mostly used, but in the most cases, they were sung in solo. In responsorial songs, several calling songs overlap with the responding songs. Durchkomponiert form is sung by antiphon or in solo, but the case sung in solo originally seems to have been sung by antiphon or unison, if we consider the procedure of the work. The "Song for Picking Up Fish" of Seonbong-gun of North Hamgyeong Province and Yangyang-gun of Gangwon Province, the "Full-Load-of-Fish Song-Bongjuktaryeong" of Jeungsan-gun of South Pyeongan Province and "Full-Load-of-Fish Song-Baechigisory" of Taean-gun of South Chungcheong Province, "Rowing Song" of Nampo City and Ganghwa-gun of Gyeonggi Province are resembled. In neighboring areas, even if the songs of different categorys, sometimes share a same melody. In a certain category, sometimes a same melody is shared to a considerable distance. It was first identified that in anchovy or herring fishing or dybowskii' sand eel fishing, the "Song for Picking Up Fish" is widely shared in the East Sea Coast area.

• (The) Research of the performance art and culture
• /
• no.19
• /
• pp.88-123
• /
• 2009

Gyeongsanjain Dano Festival is a local festival of Yeongnam that was initially designated as Intangible Cultural Heritage No. 44 "Hanjanggun Nori" in 1971 and finally became Gyeongsanjain Dano Festival in 2007. At first, few parts of it were designated for preservation and it was succeeded as a whole without connections between each part. Problems also rise from the fact that it has not been closely studied. Gyeongsanjain Dano Festival is mostly classified into five parts: Keungut, Yeowonmu, Hojanggut, Hanmyoje, and Jainpalgwangdae. This study has closely discussed each part as follows: 1. Keungut 1) Process and Contents of Keungut - Characteristics of Gut in Daegu and Gyeongsan 2) Presence of Performers that can Execute Traditional Gut of Local Area 3) Problems with the Name of Keungut - Ex: 'Hanjanggungut' or 'Keungut' 4) Problems of Dano Festival without Parts to Summon and Send off Spirits before and After Keungut and Restoration Measures 2. Yeowonmu 1) Essence of Yeowonmu and Yeowonhwa 2) Problems with the Mass Game of Hundreds of High School Girls 3) Origin and Succession of Yeowonmu 3. Hojanggut 1) Changes in Characters of Hojanggut 2) Composition and Characteristics of Hojanggut 3) Problems with the Name and Characteristics of Hojanggut 4. Jainpalgwangdae Nori 1) Similarity with Newly Created Shows 2) Problems with the Name of Palgwangdae 3) Difference with the Composition of Other Mask Dances 4) Dances and Movements Distinguished from Other Mask Dances in Yeongnam The following are the solutions suggested for Gyeongsan Jain Dano Festival. First, for the restoration of Gyeongsanjain Dano Festival, Dano festivals and Byeolsinje of nearby areas with clear traditions could be benchmarked. Second, the major content of Gyeongsanjain Dano Festival is 'Hanjanggungut,' and it has to be the leading content of the festival. Third, the structural principle of Korean festival must be adopted and the process and principle must correspond to those of other traditional shows. Fourth, as Gyeongsanjain Dano Festival is the comprehensive form of art, folk, and festival, each part must be closely related in a well-planned scenario. Fifth, Intangible talents and successful training must be widely acknowledged for successful transmission and responsible performances. Sixth, traditional festivals must be restored along with the discovery and development of various festival repertories and spectacles such as tour programs and experiential tours that contribute to local economy.