• Journal of the Korean Society for Railway
• /
• v.15 no.1
• /
• pp.48-61
• /
• 2012

It is of great importance to assure the running safety, ride comfort and serviceability in designing the floating slab track for mitigation of train-induced vibration. In this paper, for this, analyzed are the system requirements for the running safety, ride comfort and serviceability, and then, the behavior of train and track at the floating slab track including the transition zone to the conventional concrete slab track according to several main design variables such as system natural frequency, arrangement of spring at transition, spacing of spring isolators, damping ratio and train speed, using the dynamic analysis technique considering the train-track interaction. The results of this study demonstrate that the discontinuity of the support stiffness at the transition results in a drastic increase of the dynamic response such as wheel-rail interaction force, rail bending stress and rail uplift force. Hence, it is efficient to decrease the spacing of springs or to increase the spring constants at the transition to obtain the running safety and serviceability. On the other hand, the vehicle body acceleration as a measure of ride comfort is little affected by the discontinuity of the stiffness at the transition, but by the system tuning frequency; thus, to obtain the ride comfort, it is of great significance to select the appropriate system tuning frequency. In addition, the effects of damping ratio, spacing of springs and train speed on the dynamic behavior of the system have been discussed.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.3
• /
• pp.155-169
• /
• 2015

As an essential means to the exploitation of new demands, the export of agri-food has the price-supporting effect on the domestic agri-food and its expansion can be a good way to increase farms' income. Of course, to enhance farms' income under the liberalization of the market, it is necessary to have countermeasures considering various factors. To this end, the study understood the experiences of farms doing exports and looked into ways to improve them by reviewing their motivations to export, difficulties, requirements, etc. In this context, the study conducted the purposive sampling among tomato export farmhouses in Jeongseon-gun in the export enforcement phase and executed the theme analysis. The research findings and suggestions are as follows. First, in order to enhance the level of commercialization of Jeongseon-gun tomatoes and reinforce the trade bargaining power, it is necessary to form the consensus on policy and make the scaling of the site based on the strong organization power. To this end, it requires the active role of agricultural cooperatives that take a big portion of distribution in the site and distribute its profits directly to farmhouses. Second, it is necessary to set clear target markets for Jeongseon-gun tomato export farms and set sales strategies for each target market. That is, in order to expand the export of Jeongseon-gun tomatoes, after clarifying local sales and export sales, export farmhouses should focus on quality management and secure the quantity for export. Third, to expand the export to Japan which already has the foundation for the export of Korean tomatoes, and to new export countries of China, Russia, etc., it is necessary to set the 'Two-Track Strategies for Export Market (particular item for focus and particular area for focus)' through the building of network of tomato export areas in Gangwon-do. In conclusion, to expand the export of Jeongseon-gun tomatoes, agricultural cooperatives and leaders together should build the strong organizational power with farmhouses and secure the quantities for export. And, according to the 'Two-Track Strategies for Export Market (particular item for focus and particular area for focus)', export infrastructure and export operational system should be built and to do so, the solidarity of tomato export farmhouses in Gangwon area should precede.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.120-125
• /
• 2004

There are very few numbers of 115K FPP (Fixed Pitch Propulsion) Tankers for the Baltic ice class IA because the minimum power requirement of FMA (Finish- Swedish Maritime Association) needs quite large engine power and the 40 m Beam is out of calculation range of FMA minimum power requirements. The shipyard has no choice except to increase the engine power to satisfy FMA minimum power requirement Rule. And the operation cost, efficiency of hullform and its building cost are not good from the ship owners' point of view To solve this problem, the experience of ice breaking tanker development and the ice tank test results were adopted. The main idea to reduce the ice resistance is by reducing waterline angle at design load waterline. The reason behind the main idea is to reduce the ice-clearing force. Two hull forms were developed to satisfy Baltic Ice class IA. Two ice tank tests and one towing tank test was performed at MARC (Kvaener-Masa Arctic Research Center) and SSMB (Samsung Ship Model Basin) facilities, respectively. The purpose of these tests was to verify the performance in ice and open water respectively The hull form 2 shows less speed loss compared to Hull form 1 in open water operation but hull form 2 shows very good ice clearing ability. finally the Hull Form 2 satisfying Baltic ice class IA. The merit of this hull form is to use the same engine capacity and no major design changes in hull form and other related designs But the hull structure has to be changed according to the ice class grade. The difference in two hull form development methods, ice model test methods and analysis methods of ice model test will be described in this paper.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.276-284
• /
• 1993

The ABB-CE System-80 reactor power cutback system(RPCS) is designed to enable continuous operation of the reactor without trip in the events of the loss of one of the two main feedwater pumps and loss of load, and thus improves plant availability in a cost effective manner. In this study expansion of RPCS has been investigated for continuous reactor operation without trip in the event of an inward control element assembly(CEA) deviation including a single rod drop. Under the expanded function of RPCS the control system will provide a rapid core power reduction on demand by releasing CEAs to drop into the core and reduce the turbine power, if necessary, to follow the reactor power variation. This design feature which is included as the new design features to be incorporated in the ABB-CE System-80+ meets the EPRI advanced light water reactor(ALWR) requirements. For this study core analysis models of System-80+ have been developed to simulate the nuclear steam supply system(NSSS) response as well as the RPCS initiation of rapid CEA insertion. The results of this study demonstrate that the reactor trip can be avoided in the event of inward CEA deviation including a single rod drop by the RPCS initiation and thus the plant availability and capacity factor would be increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.67-75
• /
• 2014

A full-scale static test for a composite structure small aircraft (KC-100) was conducted in the KARI. The test includes 15 full-scale test and 7 local test conditions. Test requirements with test schedule, test article with dummy structures, test load generation, test system, and equipment are introduced for the test. Test load data of the 1st test condition(U1) was analyzed to evaluate an accuracy of load control for the test. The analysis results show that load data obtained during test were within tolerance of Static Null Pacing Error(SNPE) and the error value of load control was 8.6N. The error of load controls for the full-scale static test using dozens of actuators was calculated by a method suggested by authors. Test data for all other test conditions is also shown in this paper. Finally, reactions measured from restraint system of the U1 test condition show that the reaction changes as load increment. The factors which may change the change of reactions for a full-scale static test are introduced in this study.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2010

The rapid economic development induced the massive road constructions, becoming bigger and high-speed of the vehicles. However, it brings lots of social problems, such as air pollutions, traffic noise and vibration. Special concrete block for the base course of asphalt pavement is needed to decrease traffic noise such as tire's explosive and vehicles sound, applying Helmholtz Resonators theory to asphalt pavement. If it is applied to the area where it happens considerable noise such as a junction, the street of a housing complex and a residential street, it is one of considerable method to solve the social requirements of noise problem. This research examines couple of laboratory tests for the sound absorption effect of the concrete block and the base concrete block. There are specimens which is fixed hall-size, space, depth as the condition of this research, and these are analysed of noise decrease effect using different condition of the first noise of each vehicle. As a result of analysis data according to vehicle noise volume, measurement distance, a form and size of the hall using the base concrete block, the use of special concrete base showed a good alternative solution for decreasing traffic noise level, from 4 dB to 9 dB.

• Membrane Journal
• /
• v.27 no.4
• /
• pp.367-373
• /
• 2017

Pressurized membrane module systems, including hollow fiber type of Microfiltration (MF) and Ultrafiltration (UF) membranes are being increasingly used in drinking water treatment due to their high removal efficiency of pathogen. However, when fibers are damaged in pressurized membrane system, the pathogen will be able to penetrate the membrane. Therefore, it is essential to guarantee the regulatory requirements for water quality by an effective on-line or off-line condition integrity monitoring methods. Recently, pressure decay test (PDT) which is one of membrane integrity tests has been reflected to drinking water treatment plants using pressurized membrane module. In this paper, three different method were used to perform PDT and three different sensitivity values were analyzed through experiments. Three types of direct integrity test methods were applied to pressure feed side, filtrate side and bidirectional pressure decay test. The results of these experiments show that the sensitivity was increasing when the volume of pressurized gas was decreasing. The sensitivity is inversely proportional to the gas volume. Furthermore, it is desirable to increase pressure difference between feed side and permeate side in order to achieve higher sensitivity in the PDT by membrane damage.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.1
• /
• pp.23-49
• /
• 2007

The purpose of this study is to investigate the relationships among customer satisfaction, trust, and loyalty and examine the differences and similarities between specialized and general merchandise internet shopping malls concerning the relationships of these key success factors. The structural model is tested with each of the sub-samples(i.e., specialized and general merchandise shopping customers taken separately) and the data from entire data samples(i.e., specialized and general merchandise shopping customers pooled together). The same research model was used in analysing general merchandise, specialized, and integrated internet shopping mall to reveal and compare the casual path constructs. In the analysis of path coefficients composed of separated taken sample, all research hypothesis is accepted and the model's goodness of fit also shows all high. In the basis of the previous empirical test, multiple sample method was used. Properties of the causal paths, including standardized path coefficients, the significance of difference, latent correlations and variance explained for satisfaction, trust and loyalty in the hypothesized model, have similarities in general. This means that the proper structural management concerned with customer satisfaction, trust and loyalty is very crucial for the success of all kinds of internet shopping malls. Following the model test, I conduct a test of integrated model's path coefficients. Statistical results show that all the hypothesis concerned with internet shopping malls were accepted like the separated sample test. Click and mortar companies should clearly understand and articulate the key requirements of shopping mall satisfaction, trust and loyalty and encourage to establish linkage and interactive relationship among the research variables. In addition, internet marketers are required to customize the interaction considering and adapting the patterns of internet shopping malls. Other interesting results concerning the strategies in internet shopping malls strategy are also presented.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.200-214
• /
• 2014

Technology planning is becoming increasingly important with the rapid development and decline of technology. Technology roadmapping is a tool used to select whether the specific technique of technology planning should pursue which technology and in which time. This technology is important to secure the uncertain future since it will provide a method that is able to share the goals and strategies between organizations. Therefore, technology tree in the planning stage of the problem would be a very useful tool. In this study, both domestic and international technology tree application cases were analyzed to be able to derive a plan for ensuring that the research performed and the requirements are met for the future development and implementation of a convergence portal system. The six major systems that aim at water hazard information platform are basic information providing system, analysis information providing system, water disaster theme providing system, national disaster information system, water disaster augmented reality system and open information platform system. General standardized core technologies corresponding to the needed functions in each target system are derived through brainstorming, and classified according to the technology field to derive the technology tree.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.6-12
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation.