본 경쟁력 있는 국방력을 유지하기 위해서는 무기체계의 지속적인 양산도 중요하지만 유지보수 및 성능개량 또한 중요한 요소로 인식되게 되었다. 방위사업청의 주도로 국내 국방획득사업이 시스템공학을 기반으로 점차 과학화로 진전되면서, 무기체계획득에서 신연구개발사업 뿐만 아니라 성능개량사업에 대해서도 효율적 관리에 관심이 집중되게 되었다. 한편 국외상업구매는 국내 국방획득사업 형태의 하나로서, 지금까지 단순 구매사업으로 취급되어 왔는데, 특히 개조 개발이 필요한 경우 문제점이 많이 있음이 인지되었다. 본 연구에서는 무기체계 성능개량 사업 중 개조 개발이 수반되는 국외상업구매 사업에 대해서도 연구개발 수준의 프로세스를 적용해야 할 필요성을 제시하고, 관련 개선 프로세스를 연구하였다. 구체적으로 개조 개발단계 획득프로세스를 시스템공학 기반에 따라 정립하고, 요구문서 작성 프로세스와 템플릿을 도출하였다. 제안된 프로세스와 템플릿의 적용을 통해 국외상업구매를 통한 무기체계 성능개량 사업에서 개조 개발에 대한 정확한 요구분석과 효율적 사업수행 및 사업목표 달성에 대한 신뢰도 향상이 기대된다.
무형문화유산은 공동체의 지혜와 재능의 집합체로서, 한 국가의 역사성과 예술적 문화적 가치를 동시에 지니고 있으며, 한 국가의 정체성을 대변해주기 때문에 세대에 걸쳐 계승되어야 할 중요한 기록자원이다. 우리나라 무형문화유산 제도는 보존과 전승에 목적을 두고 발전해 왔으나 이제는 이에서 벗어나 무형의 문화원천에 문화다양성 및 문화산업을 위해 창조적으로 전승 및 활용하는 자원으로서의 접근이 필요하다. 따라서 무형문화유산의 지속적인 보존 및 전승을 위해서는 무형문화유산 기록정보자원을 체계적으로 관리하는 것도 중요하지만 이를 지속적으로 활용할 수 있는 기반을 마련하는 것도 중요하다. 이에 본 연구는 국내 무형문화유산 기록정보서비스 개선방안을 제시하고자 한다. 이를 위해 무형문화유산의 특성을 고려하여 관련 기관의 기록정보서비스 현황을 분석하였으며, 해당 기관에서 실제 기록정보서비스를 담당하고 있는 실무자를 대상으로 무형문화유산 기록정보서비스의 운영 시 애로사항과 개선 요구사항 등에 대해 심층 면담을 진행하였다. 이를 통해 무형문화유산기관이 제공하는 기록정보서비스의 문제점과 방향성에 대한 시사점을 도출한 후 무형문화유산 기록정보서비스 개선방안을 제안하였다.
서울시는 2014년 기존의 서울시 물순환 조례에 저영향개발 (low impact development, LID)을 포함하는 조례개정을 통해 빗물관리의 토대를 마련하였다. 새롭게 개정된 조례에서는 2050년까지 연 강수량의 약 630 mm를 저류 및 침투시킬 것을 계획하고 있으며, 침투, 저류 및 식생을 활용하는 빗물관리시스템을 도입하여 관리하고자 한다. 저영향개발기법은 개발사업에서 생태, 물순환, 환경 등의 목표를 달성하고자 할 때 적용할 수 있는 중요한 기법이다. 본 연구에서는 서울시에 적용한 침투형 빗물받이, 생태저류형 배수로 및 투수성 포장 등의 다양한 물순환 시설 (LID)의 효과를 평가하기 위하여 수행되었다. 모니터링 결과 다른 시설에 비하여 투수성 포장에서 강우유출 저감효과가 가장 높게 나타났으나, 공극막힘현상을 줄이기 위한 방안이 설계에 반영되어야 하는 것으로 나타났다. 비점오염물질 유출저감의 경우 자동차 운행정도에 의한 오염물질 축적이 큰 영향을 끼친 침투형 빗물받이, 물리 및 생물학적 기작의 영향을 받은 생태저류형 배수로에서 높게 분석되었다. 다양한 목적으로의 저영향개발 기법 적용은 물순환 효과뿐만 아니라 환경오염저감, 생태복원, 심미적 효과 등의 다양한 효과를 보이는 것으로 나타났다.
복잡해지고 대형화되고 있는 국내 외 건설 프로젝트의 변화에 따라 건축 토목 분야 설계 패러다임이 점차 2차원 설계에서 3차원 설계로 이동하고 있다. 건축 분야에서는 발주자의 적극적인 요구에 따라 건설 정보의 효율적 관리를 위하여 Building Information Modeling(BIM) 기술을 활용하고자 많은 연구와 노력이 이루어지고 있다. 그러나 토목 분야에서는 발주자 관점에서의 BIM 기술 적용 사례가 건축 분야에 비해 상대적으로 부족한 실정이며, 대부분의 프로젝트의 발주자가 국가나 공공기관인 토목 분야의 특성상 BIM과 관련된 제도나 기술에 대한 인식 미비로 기술 도입에 소극적인 것이 현실이다. 하지만 최근 토목 분야에서도 BIM 기술의 활용가능성에 주목하여 조달청 및 국토교통부와 같은 정부기관과 공사 공단과 같은 기관에서 관련 제도 정비 및 기술 도입에 적극적으로 노력하고 있다. 이에 본 연구에서는 이러한 정책 및 제도 변화에 발맞추어 나아가기 위하여 대표적인 토목공사 발주 공공기관의 BIM대응 전략에 대하여 살펴보고, 각 기관별로 실제 BIM 적용 사례 분석을 통해 토목분야에서의 BIM 기술에 대한 대응 및 발전 전략에 대하여 도출하였다.
As an essential means to the exploitation of new demands, the export of agri-food has the price-supporting effect on the domestic agri-food and its expansion can be a good way to increase farms' income. Of course, to enhance farms' income under the liberalization of the market, it is necessary to have countermeasures considering various factors. To this end, the study understood the experiences of farms doing exports and looked into ways to improve them by reviewing their motivations to export, difficulties, requirements, etc. In this context, the study conducted the purposive sampling among tomato export farmhouses in Jeongseon-gun in the export enforcement phase and executed the theme analysis. The research findings and suggestions are as follows. First, in order to enhance the level of commercialization of Jeongseon-gun tomatoes and reinforce the trade bargaining power, it is necessary to form the consensus on policy and make the scaling of the site based on the strong organization power. To this end, it requires the active role of agricultural cooperatives that take a big portion of distribution in the site and distribute its profits directly to farmhouses. Second, it is necessary to set clear target markets for Jeongseon-gun tomato export farms and set sales strategies for each target market. That is, in order to expand the export of Jeongseon-gun tomatoes, after clarifying local sales and export sales, export farmhouses should focus on quality management and secure the quantity for export. Third, to expand the export to Japan which already has the foundation for the export of Korean tomatoes, and to new export countries of China, Russia, etc., it is necessary to set the 'Two-Track Strategies for Export Market (particular item for focus and particular area for focus)' through the building of network of tomato export areas in Gangwon-do. In conclusion, to expand the export of Jeongseon-gun tomatoes, agricultural cooperatives and leaders together should build the strong organizational power with farmhouses and secure the quantities for export. And, according to the 'Two-Track Strategies for Export Market (particular item for focus and particular area for focus)', export infrastructure and export operational system should be built and to do so, the solidarity of tomato export farmhouses in Gangwon area should precede.
사물 인터넷 (Internet of Things : IoT) 환경에서 IoT 디바이스들은 전원이나 메모리 등의 물리적 구성요소들에 의해 제한되며 대역폭, 무선 채널, 처리율, 페이로드 등의 네트워크 성능 또한 제한적임에도 불구하고 타 IoT 디바이스들과 리소스를 공유한다. 특히 IoT 헬스케어 서비스에 있어서 원격 디바이스 정보 관리 뿐만 아니라 원격 환자 정보관리가 매우 중요하며, 더욱이, 사물인터넷 헬스케어 디바이스와 헬스케어 플랫폼간 상호연동성 지원이 매우 중요하다. 이를 위해서는 헬스케어 디바이스와 헬스케어 플랫폼간 데이터 정보 표현, 데이터 전송 표현, 메시지 규격 등이 사물인터넷 환경에 적합한 국제표준 준수가 매우 필요하다. 하지만, 기존의 국제의료정보 전송표준인 ISO/IEEE 11073 PHD (Personal Healthcare Device) 표준에서는 사물인터넷 환경 (네트워크 프로토콜)을 고려하지 않아 사물인터넷 헬스케어 서비스에 적용하기 어렵다. 이를 위해 본 논문에서는 사물인터넷 표준인 oneM2M과 의료정보 전송표준인 ISO/IEEE 11073 DIM(Domain Information Model)을 적용한 사물인터넷 헬스케어 시스템을 설계 및 구현하였다. 구현을 위해 oneM2M 기반인 OM2M 플랫폼을 활용하였고, 헬스케어 디바이스와 OM2M 플랫폼간 효율적인 전송 구문에 대한 평가를 위해 HTTP와 CoAP간, XML과 JSON간 단일 처리과정의 패킷 사이즈와 전송 패킷 수 등을 성능 분석하였다.
저자들은 1997년 1월부터 1998년 7월까지 두경부 악성종양 및 반안면왜소증과 같은 선천성 안면기형을 주소로 본원에 내원하였던 환자 9명을 대상으로 하여 9례의 외측대퇴 유리피판술을 시행하여 다음과 같은 결과를 얻을 수 있었다. 첫째, 두경부 재건에 있어서 외측대퇴 유리피판은 다른 유리피판술에 비해 여러 장점을 가지고 있었다. 특히, 공여부 추형이 노출되지 않는 부위이며 동시에 두팀이 수술에 참여할 수 있어서 수술시간이 단축될 수 있었다. 둘째, 술후 방사선치료를 시행하면 피판의 모발은 사라지지만 모공의 과각화증 및 색조 침착이 증가하므로, 외측대퇴부에 모발이 많은 환자는 술후 방사선치료의 여부와 관계없이 미용적인 금기사항에 해당한다. 셋째, 악성종양 절제후에 발생하는 결손의 재건시 피판의 두께가 문제시 되지 않았으며, 피판의 두께는 피판을 도안할 때의 위치, 성(sex), 피하지방층의 제거정도, 근육의 포함 정도, 술 후 피판의 위축정도에 따라 조절 가능하였다. 넷째, 모든 증례에서 정맥이식없이 혈관문합이 가능하였으므로 두경부 재건시 혈관경의 길이는 충분한 것으로 사료된다. 다섯째, 가능한 피판을 장축으로 길게 도안하여 두 번째 또는 네 번째 관통동맥을 포함시켜 수술 후 발생할지도 모르는 혈류부전에 대비하는 것도 피판의 생존률을 높이는 좋은 방법으로 사료된다.
The purpose of this study was to explore the condition of periodic medical examination, and health care services in industries. This will offer some basic data in developing industrial nursing care requirements. To achieve this goal a self-administered questionnaire (developed by the academic affairs of community health nursing) was provided to the nurses working in 40 industries from Dec 20, 1992 to Jan 20, 1993. The statistical computer package SAS, along with t-test, and ANOVA was used to manipulate the date. The results were as follows : 1. General Characteristics: The greater part of the industries studied were manufacturing company, with over 500 employees. The shift system was used with most companies using one or three shifts, and 75.0% of them were organized with Industrial Safety and Health Committees. 2. Periodic Medical Examination : Most of the workers were receiving periodic medical examination from a designated hospital (96.7%). Of those 15.8% had a close medical examination. In the medical examination 9.4% were evaluated at 'C' and 3.8 were evaluated at 'D'. About 55.0% of those workers received the result of the periodic medical examination individually(95.0%). 3. Special Medical Examination : The rate of those who were receiving special medical examination was 98.4% and about 11.7% were evaluated at 'C' and 3.9% were evaluated at 'D'. Those who had any health problems (54.2%) were receiving follow-up care, 52.4% of them had medical treatment while working. The health care managers in the company consulted 97.1% of them who had any suspicious signs and symptoms of occupational diseases. 4. Health Care Services : The average score of health care services was 13.8 out of a possible 28 point. The score of health education and health assessment, was lower than medical diagnosis and environmental hygiene. There were no significant differences in health care services according to the size of the industries(F=.95, P=.429). The score of health care services was higher in the worker who had better health and showed significant differences (F=4.50, p=.025).
최근 스트리밍 미디어는 인터넷 상의 많은 트래픽을 유발하고 있다. 기존의 웹을 위한 객체와 마찬가지로 스트리밍 객체 또한 프록시 시스템을 사용하게 되면 여러 이점이 있긴 하지만, 스트리밍 미디어를 캐슁 하는 방법은 기존의 웹을 위한 객체보다 매우 크고 높은 대역폭을 요구하기 때문에 고려해야 할 점이 많다. 또한 많은 종류의 단말들의 다양한 대역폭을 적절히 서비스 하기 위해서 프록시 기능과 트랜스코딩 기능을 함께 할 수 있는 트랜스코딩 프록시가 유용하다. 기존의 프록시는 객체가 프록시 서버에 저장되어 있거나, 그렇지 않은 경우로만 고려되었으나, 트랜스코딩 프록시에서는 같은 객체의 다양한 버전에 대해서 종합적인 효과를 고려하여 최적의 버전 집합을 저장 해야 한다. 또한 최근의 멀티미디어 캐슁 시스템들은 접근 빈도가 높은 앞부분을 캐슁하여 지연 시간을 줄이고 높은 효율을 얻을 수 있도록 하는 방법을 사용한다. 한편 많은 연구에서 멀티미디어 데이터의 효율적인 저장 관리를 위해서 객체를 세그먼트로 나누어 관리하는 방법을 사용하고 있다. 본 논문에서는 부분 캐슁을 사용하는 트랜스코딩 프록시에서 사용자 요청에 따른 후속 작업을 결정하기 위해 4개의 기본 이벤트를 이용하여 9개의 이벤트로 정의한다. 또한 트랜스코딩 프록시 시스템을 위하여 세그먼트 기반의 관리정책을 제안한다. 실험결과는 제안하는 방법이 사용자 지연시간, BHR와 트랜스코딩 데이터의 양이 적음을 보여준다.
The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.