• Journal of applied mathematics & informatics
• /
• v.26 no.1_2
• /
• pp.235-249
• /
• 2008

On-demand routing protocol in ad hoc network is that establishes a route to a destination node only when it is required by a source node. But, it is necessary to reestablish a new route when an active route breaks down. The reconstruction process establishes another route by flooding messages from the source to the destination, cause not only heavy traffic but also long delays in route discovery. A good method for analyzing performance of protocols is important for deriving better systems. In this paper, we suggest the numerical formulas of a representative on-demand routing protocol AODV, ARMP, and RRAODV to estimate the performance of these routing protocols for analyzing the performance of these protocols. The proposed analytical models are very simple and straightforward. The results of analysis show good agreement with the results of computer simulations.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.108-114
• /
• 1999

The thermal environmental chamber has been using in maintaining weather condition keeping thermal capacity under heating and cooling load fluctuation and for the performance testing of cooling system or air-conditioner on artificial envi-ronment. In ordder to make the various environmental conditions in the thermal environmental chamber the proper cooling system is necessary to eliminate the heating load produced inside the chamber and to maintain the designed environmental condition. For this reason the optimal design of cooling system and the prediction of performance is also required. This paper describes the prediction of performance of cooling system in the thermal environmental chamber with the capacity of 37,000kcal/hr which is developed for the test of performance in heating mode of heat pump system, In the results this paper is trying to develop simulation program on the base of mathematical models and which can be applied effectively to the optimal design of cooling system and prediction of performance to the inside and outside change of envi-ronmetal load.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.35-39
• /
• 2009

The fouling around the surface of hull and propeller caused by marine organism and sea water occur in the vessel which is taken up mooring in a quay for a quite long time. Moreover, those are able to give rise to the loss of speed performance. The purpose of underwater cleaning is to improve the performance of vessel and customer satisfaction through management for fouling condition of propeller and hull. Therefore, systematic approach in connection with underwater cleaning is required so as to obtain the stable speed performance. As a result, we evaluate the effect of propeller polishing to speed performance from the case of 115K COT and 4,250 TEU Container Ship. In addition, we issue the importance of underwater cleaning through comparison of speed results depending on conditions of hull surface painted by silicon.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.150-167
• /
• 2002

Normative theory suggests that control systems should be designed to complement management's objectives and strategies. However, few empirical studies have focused on how control systems have been modified to complement new manufacturing techniques, such as zero-defect strategy. The major purpose of this study is to examine the effects of the attributes of quality strategy and control system on performance. The previous studies have subdivided quality strategy into the ECL(economic conformance level) and ZD(zero-defect) strategy. To accomplish the purpose, this study empirically analysed the data based on the questionnaires from manufacturing department personnel of 67 Korean companies. The major results are as follows. The companies that had implemented the ZD strategy and its control system outperformed the companies that had implemented ECL strategy. Also, the ZD strategy differs from ECL strategy in control system, the criteria of performance evaluation and feedback frequence variable. There is no difference in quality performance monitoring and communication variable. From this results, although many companies have strived for continuous improvement of quality, it was restricted in improvement activities that dont's required much investment cost, quality performance monitoring and communication.

• Computers and Concrete
• /
• v.18 no.1
• /
• pp.69-97
• /
• 2016

Performance-based remaining life assessment of reinforced concrete bridge girders, subject to chloride-induced corrosion of reinforcement, is addressed in this paper. Towards this, a methodology that takes into consideration the human judgmental aspects in expert decision making regarding condition state assessment is proposed. The condition of the bridge girder is specified by the assignment of a condition state from a set of predefined condition states, considering both serviceability- and ultimate- limit states, and, the performance of the bridge girder is described using performability measure. A non-homogeneous Markov chain is used for modelling the stochastic evolution of condition state of the bridge girder with time. The thinking process of the expert in condition state assessment is modelled within a probabilistic framework using Brunswikian theory and probabilistic mental models. The remaining life is determined as the time over which the performance of the girder is above the required performance level. The usefulness of the methodology is illustrated through the remaining life assessment of a reinforced concrete T-beam bridge girder.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1179-1181
• /
• 2001

For high performance induction motor drives such as mill drives, elevator, spindle drive, NC and so on, smart speed controls is usually required, that requires a precise current control. This paper is proposes design of fuzzy controller which makes use of the output voltage of the space vector PWM inverter. Also, proposes the performance fuzzy controller for high performance vector control of induction motor drive system. The performance of a fuzzy controller is compared with that of an PI controller in an internal loop. The validity of the proposed technique is confirmed by simulation results for induction motor drive system.

• Journal of the Korea Society for Simulation
• /
• v.4 no.2
• /
• pp.1-16
• /
• 1995

The performance of a computer system depends on the system architecture and workload, and the high performance required in many applications can be achieved by the scalability of the system architecture and workload. This paper presents scalable workload, a performance metric of scalable speedup and hierarchical modeling for the scalable computer system as well as the development of the object-oriented simulator spmplC++ Which is an advanced C++ version of the discrete event-driven simulation environment smplE. In addition, this paper presents two examples of applying scalable speedup, hierarchical modeling and simulator smplC++ to analyze the performance effect of the sclcbility in a multiprocessor system and a network-based client/server system.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.136-140
• /
• 2001

The 3rd generation mobile telecommunication fields are being standardized and developed in two parts, 3GPP and 3GPP2. These two parts have established each Network Architecture Models to achieve the goals basically required in the 3rd generation and to make it progress to IP network in the future. To achieve these goals many system architectures are proposed. Not only functional aspects but also performance aspects are considered as major factors. This paper proposes a new method of performance evaluation modeling and simulation that improved the existing way. The method proposed in this paper is Aspect oriented logical performance analysis Modeling and Simulation method. This proposed method is expected to improve efficiency of performance analysis modeling and simulation on the 3rd generation mobile telecommunication system.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.291-295
• /
• 2009

As a reasonable energy policy has become required because of consuming substantial amounts of oil than others, the studies on energy consumption are in work for energy savings of buildings that spend up to 24% of total energy consumption. However, there aren't basic data on energy consumption and installationregulations for effective equipments in energy guzzled buildings. The best plan to reduce the building energy consumption is that the insulation performance should be improved because the insulation and airtight of building envelopes have an effect on the energy consumption basically. Thus, we should prepare the alternatives to improve insulation performance of envelopes and the efficiency of insulation performance of the window for reducing energy consumption.

• Tribology and Lubricants
• /
• v.19 no.5
• /
• pp.280-284
• /
• 2003

High performance characteristics are required for rolling bearings and the various functions of bearing are greatly influenced by grease. Recently, higher performance is being demanded of rolling bearing greases for bearing lubrication. Four special greases with different composition such as lithium soap/ester oil, urea/ester oil, urea/ether oil and PTFE/fluorine oil were synthesized to compare the performance of these greases with that of the conventional lithium soap/mineral oil grease. The grease properties were investigated using a series of typical grease testing methods and grease life test. After the life test, the greases were charaterized by FTIR analysis and a microscope. And the iron amount in the greases was analyzed by AAS after ashing. The composition and manufacturing process determined the grease performance. The grease with a base oil of synthetic oil showed higher performance and the urea/ester oil and PTFE/fluorine oil showed about three times longer life as compared with conventional lithium grease.