• 통상정보연구
• /
• 제12권2호
• /
• pp.161-182
• /
• 2010

This study tried to analyzed the relationship between market orientation, localization and performance in order to suggest to a methodology for performance 7hypothesis were constructed for analysis based on previous literature review. The results of empirical analysis shows that market orientation gave significant effect on firm's performance and localization. Localization also positively related to firm's performance. These result explains that firms which try to take superior of performance must build high level of market orientation should be realized and reacted the complicated market situation. such as consumer needs, competitor's action, change of technology and provider's action, etc. For this, management of uncertainty should be required through the high level of information-oriented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.551-556
• /
• 2002

High-performance concrete is defined as concrete that meets special combinations of performance and uniformity requirements that cannot always be achieved routinely using conventional constituents and normal mixing, placing, and curing practices. Ever since the term high-performance concrete was introduced into the industry, it had widely used in large-scale concrete construction that demands high-strength, high-flowability, and high-durability. To obtain such performances that cannot be obtained from conventional concrete and by the current method, a large number of trial mixes are required to select the desired combination of materials that meets special performance. In this paper, therefore, using genetic algorithm which is a global optimization technique modeled on biological evolutionary process-natural selection and natural genetics-and can be used to find a near optimal solution to a problem that may have many solutions, the new design method for high-performance concrete mixtures is suggested to reduce the number of trial mixtures with desired properties in the field test. Experimental and analytic investigations were carried out to develop the design method for high-performance concrete mixtures and to verify the proposed mix design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.618-622
• /
• 2007

Recently, in accordance with elevation of the consciousness level of citizens, the desire for cultural life is on increasing, and according to this trend, it is the real fact that the demand of the Grand Performance Hall where various cultural events can be performed, is also on increasing. However, since the Grand Performance Hall in view of its distinctiveness, is required of the repletion or abundance of sound, it could be said that the sufficient examination and planning about this are indispensable from the designing stage. On this viewpoint, this Study has intended to design the performance hall that maintains the optimized acoustic capacity through an acoustic simulation for the object of the grand performance hall on the step of construction. After completion of the construction for Grand Performance Hall hereafter, if compare the data analyzed in such way with the actually measured acoustic performance, it is considered that the more optimized architectural acoustic design could be achieved.

• 대한기계학회논문집B
• /
• 제24권12호
• /
• pp.1625-1634
• /
• 2000

Verification of measurements is required for precise evaluation of turbine cycle performance in nuclear power plant. We assumed that initial acceptance data and design data of the plant could provide correlation information between performance data. The data can be used as sample sets for the correct estimation model of measurement value. The modeling was done practically by using regression model based on plant design data, plant acceptance data and verified plant performance data of domestic nuclear power plant. We can construct more robust performance analysis system for an operation nuclear power plant with this validation scheme.

• 상하수도학회지
• /
• 제29권5호
• /
• pp.583-590
• /
• 2015

Evaluation and comparison for the performance on the contracting-out became possible after the introduction of the performance indicators(PIs) in 2012 in Korea, And local governments and private companies are utilizing them as evaluation data to enhance the performance of the contracting-out. Several revisions on performance indicator were carried out by expert group on contents validity of PIs, But the review of the composition validity of PIs was not sufficient. In this study, the applicability, distinction ability and composition validity of PIs is evaluated by statistical method. From the results, Improvement of indicator is required in order to increase the interrelationship among indicators to enhance the compostion validity of indicators related with operation, sludge and water reuse.

• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.29-43
• /
• 1999

As real-time processing of data with large storage space is required in the era of multimedia, disk arrays are generally used as storage subsystems which be able to provide improved I/O performance. To design the cost-effective disk array, it is important to develop performance models which evaluate the disk array performance. Both queueing theory and simulation are applicable as the method of performance evaluation through queueing modeling. But there is a limit to the analytical method using queueing theory due to the characteristics of disk array requests being serviced in the parallel and concurrent manner. So in this paper we evaluate the disk array performance using simulation method which abstract disk array systems in the low level. Performance results were evaluated through simulation, so that mean response time, mean queueing delay, mean service time, mean queue length for disk array requests and utilization, throughput for disk array systems, can be utilized for capacity planning in the phase of disk array design.

• 한국항행학회논문지
• /
• 제20권4호
• /
• pp.336-343
• /
• 2016

미래항공항행시스템 (FANS; future air navigation system) 위원회는 전통 시스템의 한계를 극복하고 세계적으로 항공교통관리 발전을 가능하게 할 새로운 시스템 개발이 필요하다고 결정하였다. 급격한 항공기 교통량 증가를 수용하고 안전한 항공 운항의 효율성을 극대화하기 위해 ICAO에서 성능기반 항공통신 및 감시 (PBCS; performance based communication and surveillance) 제도를 새롭게 규정하고 적용하도록 권고하고 있다. 하지만 현재 국내의 경우 무선 데이터 링크를 사용하지만, PBCS의 도입이 정상적으로 수행되지 않는다. 본 논문에서는 PBCS 개념을 살펴보고, 해외 항공선진국이 PBCS를 적용 사례를 살펴본다. 또한 국내에서 PBCS를 도입하기 위한 국내 현황과 문제점을 분석하고 향후 정책방향에 대한 방안을 소개한다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.281-285
• /
• 2001

This study was carried out to improve the performance of heat recovery device attached to exhaust gas flue connected to combustion chamber of greenhouse heating system. Three different units were prepared for the comparison of heat recovery performance; AB-type(control unit) is exactly the same with the typical one fabricated for previous study of analyzing heat recovery performance in greenhouse heating system, other two types(C-type and D-type) modified from the control unit are different in the aspects of airflow direction(U-turn airflow) and pipe arrangement. The results are summarized as follows; 1. In the case of Type-AB, when considering the initial cost and current electricity fee required for system operation, it is expected that one or two years at most would be enough to return the whole cost invested. 2. Type-C and Type-D, basically different with Type-AB in the aspect of airflow pattern, are not sensitive to the change of blower capacity with higher than $25\;m^{3}/min$. Therefore, heat recovery performance was not improved so significantly with the increment of blower capacity. This is assumed to be that air flow resistance in high air capacity reduces the heat exchange rate as well. Never the less, compared with control unit, resultant heat recovery rate in Type-C and Type-D were improved by about 5% and 13%, respectively. 3. Desirable blower capacity for these heat recovery units experimented are expected to be about $25\;m^{3}/min$, and at the proper blower capacity, U-turn airflow units showed better heat recovery performance than control unit. But, without regard to the type of heat recovery unit, it is recommended that comprehensive consideration of system's physical factors such as pipe arrangement density, unit pipe length and pipe thickness, etc., are required for the optimization of heat recovery system in the aspects of not only energy conservation but economic system design.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.365-376
• /
• 2011

현행 콘크리트구조설계기준(2007)은 콘크리트 구조물의 설계에 적용하는 콘크리트의 압축응력 분포로 ACI 318의 등가 직사각형 응력 분포를 규정하고 있다. 단면의 휨강도 해석에는 등가 직사각형 응력 분포가 충분하겠지만, 성능 중심 설계의 한계 상태 검증에는 실제와 가까운 압축응력-변형률 관계가 필요하다. 또 등가 직사각형 응력 분포는 고강도 콘크리트 기둥의 휨강도 해석에 비안전측의 결과를 준다는 것이 알려져 있으므로, 이를 대신하는 새로운 응력 분포 모델이 필요하다. 이 연구에서는 Eurocode와 일본 토목학회의 설계기준에서 채택하고 있는 포물선-직선 형상의 새로운 모델을 제안하였다. 이 응력 분포 모델은 이 연구에서 수행된 압축응력 분포 실험과 타 연구자들의 실험 결과를 분석하여 도출된 것으로서, 보통 강도뿐만 아니라 고강도 콘크리트를 포함한 것이다. 제안 모델의 특성은 미국 ACI 318, 캐나다 CSA, 유럽의 Eurocode, 일본 토목학회 설계기준의 응력 분포 모델과 함께 실험 결과와 비교하여 정리하였다.

• Advances in concrete construction
• /
• 제8권2호
• /
• pp.155-163
• /
• 2019

The objective of this study was to derive a cementitious material for three-dimensional (3D) concrete printing that fulfills key performance functions, extrudability, buildability and bondability for 3D concrete printing. For this purpose, the rheological properties shown by different compositions of cement paste, the most fundamental component of concrete, were assessed, and the correlation between the rheological properties and key performance functions was analyzed. The results of the experiments indicated that the overall properties of a binder have a greater influence on the yield stress than the plastic viscosity. When the performance of a cementitious material for 3D printing was considered in relation with the properties of a binder, a mixture with FA or SF was thought to be more appropriate; however, a mixture containing GGBS was found to be inappropriate as it failed to meet the required function especially, buildability and extrudability. For a simple quantitative evaluation, the correlation between the rheological parameters of cementitious materials and simplified flow performance test results-time taken to reach T-150 and the number of hits required to reach T-150-in consideration of the flow of cementitious materials was compared. The result of the analysis showed a high reliability for the correlation between the rheological parameters and the time taken to reach T-150, but a low reliability for the number of hits needed for the fluid to reach T-150. In conclusion, among several performance functions, extrudability and buildability were mainly assessed based on the results obtained from various formulations from a rheological perspective, and the suitable formulations of composite materials for 3D printing was derived.