This study uses digital imaging and communications in medicine (DICOM) files acquired after CT scan to obtain the absorbed dose distribution inside the body by using the patient's actual anatomical data; uses geometry and tracking (Geant)4 as a way to obtain the accurate absorbed dose distribution inside the body. This method is easier to establish the radioprotection plan through estimating the absorbed dose distribution inside the body compared to the evaluation of absorbed dose using thermo-luminescence dosimeter (TLD) with inferior reliability and accuracy because many variables act on result values with respect to the evaluation of the patient's absorbed dose distribution in diagnostic imaging and the evaluation of absorbed dose using phantom; can contribute to improving reliability accuracy and reproducibility; it makes significance in that it can implement the actual patient's absorbed dose distribution, not just mere estimation using mathematical phantom or humanoid phantom. When comparing the absorbed dose in polymethly methacrylate (PMMA) phantom measured in metal oxide semiconductor field effect transistor (MOSFET) dosimeter for verification of Geant4 and the result of Geant4 simulation, there was $0.46{\pm}4.69%$ ($15{\times}15cm^2$), and $-0.75{\pm}5.19%$ ($20{\times}20cm^2$) difference according to the depth. This study, through the simulation by means of Geant4, suggests a new way to calculate the actual dose of radiation exposure of patients through DICOM interface.
As the number of Coronavirus Disease-19 (COVID-19) patients increases in a global pandemic situation, the usefulness of mobile computed tomography (CT) is gaining attention. Currently, mobile CT follows the basic safety and essential performance evaluation criteria of whole-body or limited-view X-ray CT in order to obtain device approval and evaluation in the Republic of Korea. Unlike stationary CT, mobile CT is not operated in shielded areas but rather areas such as intensive care units, operating rooms, or isolation rooms. Therefore, it requires a different basic safety and essential performance evaluation standard than stationary CT. In this study, four derived basic safety evaluation criteria related to electrical, mechanical, and radiation safety were included (dose indication test, protection against stray radiation, safety measures against excessive X-rays, half-value layer measurement); and seven essential performance evaluation criteria were included (tube voltage accuracy, mAs accuracy, radiation dose reproducibility, CT number of water, noise, uniformity, and spatial resolution); total eleven basic safety and essential performance evaluation criteria were selected. This study aims to establish appropriate basic safety and essential performance evaluation criteria for simultaneously obtaining images with diagnostic value and reducing the exposure of nearby patients, medical staff, and radiologic technologists during the use of mobile CT.
간담도암의 일차적 치료법은 수술적 제거이나, 초기 병기로 수술을 하여도 재발이 흔하며, 재발 후에는 근치적 목적이 아닌 주로 증상 완화 목적의 치료를 하고 있다. 이에 본 연구에서는 재발한 환자에서 자체 도입한 특수 관을 이용한 근치적 목적의 high-dose-rate intraluminal brachytherapy의 치료법과 치료 set-up 재현성 유지에 대하여 고찰하고 자 한다. 본 연구는 간담도암으로 수술 후, 6개월 간격으로 복부 자기 공명 영상을 이용한 추적 검사를 시행하여, 수술문합 부위의 재발이 확인된 임상 병기 rcT1N0M0인 환자를 대상으로 하였다. 근접 치료를 위하여 경피적 담도 배액관을 치료 전용관인 Arrow Sheath로 교체 후, intraluminal catheter를 삽입하여, 일회 치료당 3 Gy 씩 총 30 Gy 근접치료를 시행하였다. 협착 된 담도의 distal and proximal 그리고 central axis point로부터 1 cm 떨어진 지점을 선량표준화였으며, 5회에 걸쳐 치료 전 dummy seed 삽입 후, 치료 표적 용적 근위부와 말단부의 기준점에서 흉추 사이의 거리를 측정하여 set-up 재현성을 평가하였다. 매주 치료 전 근위부와 말단부위 치료 표적 용적 기준점에서 흉추 사이의 거리를 5회 측정한 값과 simulation image에서 측정된 거리를 비교한 결과 평균값과 표준편차가 오차율 5% 이내로 유의한 수준으로 측정되어 매회 치료시 재현성이 유지 되었다, 본 연구 환자의 추적 검사 상 1년 이상 무병 생존하고 있으며, 심각한 부작용 또한 관찰되지 않았다. 따라서, 수술이 불가능한 재발한 간담도암 환자에서 본원에서 자체 도입한 관으로 시행한 근접치료는 주변 인접 장기의 심각한 부작용 발생 없이, 매 회 치료 시 재현성이 유의한 수준으로 유지 되는 것으로 평가되었다.
In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.
인근적외선 분광법(Near infrared spectroscopy, NIRS)으로 얻은 디아제팜정의 스펙트럼을 부분최소자승법(Partial least squares regression, PLSR)으로 처리하여 디아제팜정에서 디아제팜을 신속하고 간단하게 분석하는 방법을 연구하였다. 2 mg 및 5 mg 의 디아제팜정을 이용하여 검정선을 작성하고, 이 검정선의 직선성, 정량범위, 재현성 등을 검토하여 본 분석법의 정확성을 검증하였다. 2 mg의 디아제팜의 검정선의 상관계수는 0.9416이고, 검정선 표준오차(SEC)는 0.018%이였다. 5 mg의 디아제팜의 검정선의 상관계수는 0.9157이고, 검정선오차는 0.032%이였다.
목 적: 임상에서 인버터식 X선장치의 사용이 보편화됨에 따라 이에 대한 보다 정확하고 간편한 성능평가 방법이 요구되고 있다. 따라서 최근 국내에 소개되어 사용되고 있는 X-Ray Multi-Function Test Device (model : Xi (unfors)-prestige)를 이용한 성능평가의 유용성을 확인하고자 한다. 방 법: 인버터식 X선장치의 성능 평가시 접속형 측정장비로 널리 활용되고 있는 Dynalyzer III를 이용한 성능평가를 기준으로 하여 비접속형 측정장비인 X-Ray Multi-Function Test Device (model: Xi (unfors)-prestige)의 성능평가를 비교 분석하여 그 유용성을 검토하였다. 결 과: 두 측정기에 대한 X선 출력선량은 큰 차이 없이 측정되었으며 촬영조건 등의 변화에 따라서 접속형인 Dynalyzer III가 약간 증가된 값으로 측정되었으며 출력의 재현성은 두 측정기 모두 성능평가 합격 기준 0.05 이하인 0.002 이하로, 직선성은 합격기준인 0.1 이하로 평가되었다. 촬영조건의 정확도에서는 관전압은 1.8과 2, 관전류는 2.01과 2.3, 촬영시간은 T > 0.01 sec에서 ${\pm}10%$ 이하로 나타났다. 모두 성능평가 기준의 허용범위에 있는 것으로 나타났다. 결 론: X-Ray Multi-Function Test Device (model: Xi (unfors)-prestige) 측정기를 이용한 인버터식 X선장치의 X선 출력의 재현성, 직선성과 촬영조건의 정확도에 대한 성능평가의 유용성을 확인하였다.
To establish National Reference Method (NRM) for $PM_{2.5}$, operational performance of 5 different commercial gravimetric-based $PM_{2.5}$ measuring instruments was assessed at Bulkwang monitoring station from January 23, 2014 to February 28, 2014. First, physical properties, design, and functional performance of the instruments were assessed. Evaluation was carried out to determine whether operating method for the instruments and levels of QA/QC activities meet the data quality objectives (DQOs). To verify whether DQOs were satisfied, reproducibility of QA/QC procedures, accuracy, relative sensitivity, limit of detection, margin of error, and coefficient of determination of the instruments were also evaluated. Results of flow rate measurement of 15 candidate instruments indicated that all the instruments met performance criteria with accuracy deviation of 4.0% and reproducibility of 0.6%. Comparison of final $PM_{2.5}$ mass concentrations showed that the coefficient of determination ($R^2$) values were greater than or equal to 0.9995, and concentration gradient ranged from 0.97 to 1.03. All the instruments satisfied criteria for NRM with the estimated precision of 1.47~2.60%, accuracy of -1.90~3.00%, and absolute accuracy of 1.02~3.12%. This study found that one particular type of measuring instrument was proved to be excellent, with overall evaluation criteria satisfied.
Prometryn은 트리아진계 제초제로 일년생 쌍자엽 식물체와 같은 일년생 잡초 제거에 탁월한 효과가 있으나 일부 토양에 약효가 여러 달 지속될 경우 수중계에 스며들어 축적과 이동, 생물학적 농축(biomagnification)등의 심각한 환경문제를 비롯한 수질오염, 야생동물 및 국민건강에 심각한 문제를 일으킬 수 있는 잔류물질이다. 최근 국내에서 중국산 바지락 및 그 가공품에서 prometryn의 검출이 보고된 바 있어 이에 대한 지속적인 모니터링이 필요하기 때문에 바지락 중의 prometryn 분석법 개발이 필요한 실정이다. 본 연구에서는 수산물 중 바지락을 시료로 사용하였다. 시료를 아세토니트릴로 추출하고 농축한 다음 20% 아세톤 함유 헥산을 첨가하여 용해하였다. 이 용액을 florisil 카트리지로 정제한 후 농축하여 GC-MS로 분석하였다. 기기분석은 SIM 모드로 m/z 241 이온에 대하여 정량하였고, LOQ는 0.04 mg/kg으로 계산되었으며, LOQ, $2{\times}LOQ$ 농도에서의 회수율 및 분석오차가 각각 84.0-98.0%, 3.1-7.1%로 분석되어 Codex 가이드라인 규정에 만족하였다.
The author studied on the effect of TMJ sounds to the patterns and ranges of mandibular border movements in horizontal plane with Pantograph (Denar Corp.). For study, 19 patients with TMJ sounds only and 16 students with no TM disorder were selected and classified as experimental group and control group, respectively. The subject performed right lateral movement, left lateral movement, and forward movement. Each movement were performed 3 times and the movement trajectory obtained with mechanical pantograph were observed for accordance of centric relation position, reproducibility and/or restriction of lateral movement paths, deviation of protrusive path in anterior table, restriction of protrusive condylar movement path in posterior horizontal table, presence of Fisher angle in posterior vertical table. And pantographic reproducibility Index (PRI) were obtained with pantronic by the same movement method as in the mechanical pantograph record. The obtained results were as follows : 1. In experimental group, PRI scores in those who show accordance of centric relation position were 14.4, and were 26.53 in those who did not show accordance of centric relation position. However, the PRI scores of the two subgroups show no statistically significant difference in control group. Therefore, in experimental group, the capability of accordance of centric relation position affected largely the PRI scores than in control group. 2. Deviation of protrusive path was opposite to the affected side in experimental group, and was left side in control group. 3. Restriction side of condylar movement in protrusion was ipsilateral to the deviation side in experimental group, but in control group, restriction side was not related to the deviation side. 4. PRI scores in experimental group were 23.2 (moderate dysfunction category), and in control group, were 17.8 (slight dysfunction category). The PRI scores in control group, however, implies that the evaluation of temporomandibular disorders by the PRI scores only may be unreasonable.
Kim, Mi-Ja;Huh, Kyung-Hoe;YI, Won-Jin;Heo, Min-Suk;Lee, Sam-Sun;Choi, Soon-Chul
Imaging Science in Dentistry
/
제42권1호
/
pp.25-33
/
2012
Purpose : This study was performed to determine the accuracy of linear measurements on three-dimensional (3D) images using multi-detector computed tomography (MDCT) and cone-beam computed tomography (CBCT). Materials and Methods : MDCT and CBCT were performed using 24 dry skulls. Twenty-one measurements were taken on the dry skulls using digital caliper. Both types of CT data were imported into OnDemand software and identification of landmarks on the 3D surface rendering images and calculation of linear measurements were performed. Reproducibility of the measurements was assessed using repeated measures ANOVA and ICC, and the measurements were statistically compared using a Student t-test. Results : All assessments under the direct measurement and image-based measurements on the 3D CT surface rendering images using MDCT and CBCT showed no statistically difference under the ICC examination. The measurements showed no differences between the direct measurements of dry skull and the image-based measurements on the 3D CT surface rendering images (P>.05). Conclusion : Three-dimensional reconstructed surface rendering images using MDCT and CBCT would be appropriate for 3D measurements.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.