• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.700-705
• /
• 2012

$Prunus$ $mume$ was steamed for easier removal of the pulp. The steamed fruit pulp was vacuum dried and powdered. The steamed $Prunus$ $mume$ powder (SPP) was passed through a 250 ${\mu}m$ sieve, fluidized in a fluid-bed granulator, and then granulated by top-spraying with water (SPPGW) or the extract obtained from steam (SPPGE). Then the physicochemical and sensory properties of SPP, SPPGW, and SPPGE were evaluated. The flowability of powder (angle of repose $^{\circ}$) of SPP, SPPGW and SPPGE was $23.59^{\circ}$, $11.07^{\circ}$, and $13.94^{\circ}$, respectively. The water dispersibility of SPP, SPPGW, and SPPGE was 18.69, 10.04 and 6.00 sec, respectively. Also, the overall acceptance of SPP, SPPGW and SPPGE was 3.00, 3.44 and 6.56, respectively. In conclusion, SPPGE can be used as granular steamed whole fruit pulp with good powder flowability and dispersibility, and therefore consumer acceptance.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.295-305
• /
• 2013

Purpose: Recent research showed that total mixed ration (TMR) feeding for pigs improved the productivity and reduced feed cost and manure odor. An automatic TMR feeding system was developed for this study because the conventional feeder cannot deliver the TMR containing roughage. Methods: Conventional feeding systems and physical properties of TMR were surveyed, and performance tests of the conventional feeder were conducted to develop a TMR feeder. Based on the TMR feeder was developed and installed, driving, measuring weight, radio frequency identification (RFID) reading, and discharging test for feeding were conducted to ensure the performance. Results: Moisture content, density, and angle of repose of the TMR 1 (mixture of 30% cut IRG silage and 70% concentrates) were 31.6%, 387 $kg/m^3$, and $51^{\circ}$, respectively. Moisture content, density, and angle of repose of the TMR 2 (mixture of 45% concentrates, 30% cut IRG silage and by-products, 10% bean curd refuse, 10% others, and 5% fermenter) were 22.2%, 544 $kg/m^3$, and $50^{\circ}$, respectively. The coefficient of variation (C.V.) of conventional concentrate feeding were 1.9~4.1%, and C.V. of TMR containing 1~3% cut IRG roughage feeding by conventional feeder were 9~42%. The conventional disc type feeder was not suitable for TMR feeding because the supply unit was clogged. The C.V. of TMR 1 was 0.6~7.9% when 0.5~10 kg of the TMR supplied, and it was suitable for feeding grow-finish pigs and sows. On the contrary, the C.V. with TMR 2 was 28% when 0.5 kg of the TMR supplied, and it was not suitable for feeding sows. Conclusions: The TMR feeder developed in this study was suitable for feeding grow-finish pigs because the feeder performed stably with over 5.0 kg feed. However, the feeder showed a lack of accuracy for feeding sows because the amount of each feed was more than 0.5 kg per a feeding. Therefore, the improvement of outlet structure for accurate feeding is needed for sow feeding.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.740-745
• /
• 2002

The current study was conducted to identify the differences in the rheological properties of Chlorella sp. powder cultured in a fermentor and in a pond-like environment. Cells. cultured in the same media were harvested and spray dried. The biomass yield from the fermentor culture was 4.7% (dry basis), while that from the pond was 4.3% (dry basis). Measurements of the loose bulk density, tapping test, Hausner's ratio, and compressibility test all revealed differences between the rheological properties of the Chlorella sp. from the two cultivation systems. Although both the fermentor and pond cultured Chlorella sp. showed the same angle of repose, the mean size of the cells was 2.26 $\mu\textrm{m}$ and 2.89 $\mu\textrm{m}$, respectively. The weight of the Chlorella sp. tablets cultured in the fermentor and pond was 0.663 g/tablet and 0.593 g/tablet, respectively, while the friability of the tablets was 21% and 41%, respectively. Observation by Transmission Electron Microscope (TEM) showed that the cell wall of the Chlorella sp. cultured in the fermentor was thinner and more spherical than that cultured in the pond, thereby providing the main characteristic rheological properties of the powder.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.347-351
• /
• 2010

Isoflavones have received much attention because of their health-related and clinical benefits such as estrogenic and anti-oxidative activities as well as triggering of natural killer cell activity. However, there are few publications reporting the pharmacokinetic profiles together with physicochemical properties of main isoflavones. Therefore, the pharmacokinetic parameters of main aglycones, daidzein, glycitein and genistein after oral administration of soybean extracts were investigated and the physicochemical properties of soybean extracts were characterized. It was observed that angle of repose was $46^{\circ}$ and tap density, bulk density and porosity were 10.12, 4.3 and $0.86\;g/cm^3$ and the mean $AUC_{last}$ of daidzein, glycitein and genistein was $11.376\;{\mu}g{\cdot}h/mL$, $3.045\;{\mu}g{\cdot}h/mL$ and $0.825\;{\mu}g{\cdot}h/mL$, respectively. Cell viability was 60% at a concentration of 10 mg/mL. Taken together, it was suggested that isoflavones were contained in the soybean products and had an antioxidant activity and this study would be the basis to control the quality of soybean products and study of the bioequivalence between soybean products in future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1750-1754
• /
• 2010

구조물 주변의 국부세굴에 대한 예측은 현장관측 및 수리실험 결과를 이용한 다양한 경험식과 수리모형 실험, 수치 모의 등을 통하여 이루어진다. 본 연구에서는 최근 국내에서 많이 사용되고 있는 3차원 수치모형인 FLOW-3D의 세굴분석 능력 검토를 제고하기 위하여 민감도 분석을 실시하였다. FLOW 3D의 입력 매개변수는 평균입경(Average particle diameter), 유사 비중(Density of the sediment particle), 한계 무차원 소류력(Critical Shields number), 세굴 조절개수(Scour erosion adjustment), 한계 유사비(Critical sediment fraction), 점착성 유사비(Cohesive sediment fraction), 유사 항력(sediment drag force), 안식각(Angle of repose)이 있다. 이 중에서 평균입경, 안식각, 세굴조절개수, 한계 유사 fraction 등의 매개변수에 대해 초기값을 중심으로 일정 비율로 구분하여 민감도 분석을 실시하였다. 주요 매개변수의 민감도 분석 결과는 수리실험 결과치와 비교 검토 후에 민감도의 변화 범위와 선행하여 조정할 수 있는 매개변수를 제시할 수 있다. 이러한 결과를 바탕으로 수공구조물 주변의 국부 세굴에 관한 해석시 FLOW-3D를 이용한 분석에서 보다 신뢰도 높은 결과 산출이 가능할 것으로 판단된다.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.425-431
• /
• 2019

Generally, ceramic tiles for building construction are manufactured by dry forming process using granular powders prepared by spray drying process after mixing and grinding of mineral raw materials. In recent years, as the demand for large ceramic tiles with natural texture has increased, the development of granule powders with high packing ratio and excellent flowability has become more important. In this study, ceramic tile granule powders are coated with hydrophobically treated silica nanoparticles. The effects of hydrophobic silica coating on the flowability of granule powders and the strength of the green body are investigated in detail. Silica nanoparticles are hydrophobically treated with GPTMS(3-glycidoxypropyl trimethoxy silane), which is an epoxy-based silane coupling agent. As the coating concentration increases, the angle of repose and the compressibility decrease. The tap density and flowability index increase after silica coating treatment. These results indicate that hydrophobic treatment can improve the flowability of the granular powder, and prevent cracking of green body at high pressure molding.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.717-726
• /
• 2020

The physical characteristics of the major varieties of perilla were analyzed to use as basic data for the design of a high-quality, high-efficiency perilla cleaner and stone separator. Because the size, thousand-grain weight, angle of repose, angle of friction, bulk density and terminal velocity of perilla have significant differences according to the perilla variety, the different of characteristics by variety should be considered for performance improvement of a perilla cleaner and stone separator. Therefore the cleaner and stone separator using a sieve could be improved by the application of a detachable sieve or by using equipment such as a 2 - 3 stage sieve and regulating the slope. Moreover, because differences in the terminal velocity occur due to the differences in the size and thousand-grain weight according to the perilla variety, a blower with an adjustable fan speed was considered for the design of the improved cleaner. Additionally, it was shown that the length of perilla has the greatest correlation based on a comparison of the coefficients of the other characteristics. Accordingly, the length of perilla could be used as a major factor for the fine adjustment and parts replacement of the device. These results can be used as basic data for a high-quality, high-efficiency perilla cleaner and stone separator. In the future, the development of the machine and follow-up studies based on the basic data are needed to determine the optimized operating conditions and mechanism of action.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.126-131
• /
• 2013

BGsome coating on the surface of illite powder was attempted to impart skin affinity and improve various characteristics of the powder for makeup cosmetics. BGsome is a type of hydrated liquid crystalline vesicles prepared by the hydration of 1,3-butylene glycol (BG) dissolved lecithin. BGsome droplets were coated through wet process and the coated powders were analyzed by TGA, SEM, and particle size measurements. Effect of BGsome coating on the physical properties, such as flow-ability, dispersibility, spreadability, and adhesion, were examined. The repose angle of BGsome-coated illite was decreased, which means that BGsome coating improves the flowability of the powder. Dispersibility, spreadability, and adhesion of the coated illite were also improved remarkably. The result of adhesion tests showed that the BGsome-coated illite was evenly adhered onto artificial leather surface with almost no lumps. The flowability, dispersibility, spreadability and adhesion of face powders containing the BGsome-coated illite were also improved.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.416-423
• /
• 1993

Milk powders were made by several drying methods and raw materials, and rheological properties of milk powders were investigated by an Instron Universial Testing Machine. The results obtained are summarised as follows. Bulk density of the drum dried whole milk powder was $0.382\;g/cm^3$ and was higher than that of other milk powders. The Hausner ratio, angle of repose and compressibility of the spray dried skim milk powder were 1.127, $32.5^{\circ}$ and 0.029 respectively. This result indicated that skim milk powder showed free flowing characterristics. The compressibility of the drum dried whole milk powder was decreased by the decrease of moisture content. Compressibility of the milk granule was 0.056 and was lower than that of milk powder. The spray dried milk powder of a grobular shape had higher solidity than the freeze or drum dried milk powder. The drum dried milk powder particles consist of irregular shape.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.921-932
• /
• 2010

In this study, the adjustment processes of the disturbed channels by sand or gravel mining were investigated by a two dimensional numerical model in the generalized coordinate system. As a numerical scheme, the CIP (cubic interpolated pseudoparticle method) method was used to calculate the advection term in the flow field and central difference method was used to the diffusion term in it. The pit of the channel was partially filled with sediment at the toe of the pit upstream. As time increased, the headcut erosion upstream in the pit was decreased due to the sediment inflow. The almost inflow sediment upstream was trapped into the pit and the sediment deposit wedge migrated downstream in the pit with the steep submerged angle of repose. The numerical model was reproduced well the evolution processes of the channel. The mining pit migrated with speed as the channel was steep, and the numerical results were in overall agreement with the experimental results.