• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.61-68
• /
• 2011

업무의 IT 의존도가 높아지면서 재해로부터 기업의 자산을 보호하는 것은 IT 운영 관리자들이 가장 고려해야 할 사항들 중 하나이고 데이터 및 정보는 기업 활동의 원천이기 때문에 데이터 보호는 업무 연속성 측면에서 IT 운영의 최대 우선순위가 되고 있다. 그러므로 본 논문은 이러한 재해로 인하여 중단된 정보기술 서비스를 재개하는 재해 복구를 위한 시스템을 클라우드 컴퓨팅 기반으로 구현하였다. 구현된 고가용성 복제 시스템은 복제성능 향상을 위해 다중 스레드 대상 데이터베이스 방법을 적용하였으며, 파일시스템의 실시간 동기화 기술로 네트워크 효율을 향상 시킬 수 있으며, 액티브 대 액티브 운영으로 백업 시스템 활용을 극대화함으로써, 근원지 데이터베이스 시스템의 부하를 분산시키는 효과를 갖게 한다. 이밖에도 복제 데이터의 정합성 검증 기능과 데이터 센터의 실제 운영에서 요구되는 모니터링 기법 등을 구현하였다. 성능평가에서도 다중 스레드 방식을 사용함으로써 단일 스레드 방식보다 약 3배 이상의 향상된 복제 기능 성능결과를 보여주었다.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.422-429
• /
• 2018

PURPOSE. Accurate color matching of maxillofacial prostheses to skin is important for esthetics. A computerized color matching system specific to human skin has recently been developed. The purpose of this study was to evaluate the accuracy in color and translucency matching of the computerized color matching system across different skin colors. MATERIALS AND METHODS. The silicone was colored to simulate 28 different skin colors (n=5) to serve as "target skin colors". Using a spectrocolorometer (e-skin), color codes were determined for "replicate skin color" fabrication. CIELAB Delta-E between target skin color-replicate skin color pairs and translucency parameter were calculated. CIELAB Delta-E values were compared with one-way ANOVA and Tukey multiple-comparison. The agreement between $L^*$, $a^*$, $b^*$ and translucency parameter of target skin colors and replicate skin color were calculated by a two-way mixed average measures intraclass correlation coefficient. Translucency parameter of target skin color- replicate skin color pairs were compared with Paired t-test (${\alpha}=.05$). RESULTS. The mean CIELAB Delta-E value was 3.83 and significant differences were found among colors. The intraclass correlation coefficient showed excellent reliability for $L^*$, $a^*$, $b^*$ and good reliability for translucency parameter (P<.001). The mean translucency parameter of replicate skin colors was significantly higher than that of translucency parameter. CONCLUSION. The computerized color matching system specific to human skin was found to be reliable in terms of color and translucency between target skin colors and replicate skin color.

• Journal of the Korean Statistical Society
• /
• 제23권2호
• /
• pp.513-522
• /
• 1994

A multi-dimensional design is most easily constructed via the amalgamation of one-dimensional component block designs. However, not all sets of component designs are compatible to be amalgamated. The conditions for compatibility are related to the concept of a complete matching in a graph. In this paper, we give sufficient conditions for unequal-replicate designs. Two types of conditions are proposed; one is based on the number of verices adjacent to at least one vertex and the other is ona a degree of vertex, in a bipartite graph. The former is an extension of the sufficient conditions of equal-replicate designs given by Dean an Lewis (1988).

• 한국물환경학회지
• /
• 제29권6호
• /
• pp.790-798
• /
• 2013

Benthic macroinvertebrates are widely used as biological indicators for assessing the integrity of aquatic ecosystem. However, sampling has usually been done with fixed sample size due to time consuming and costly process. This study was conducted to find out the influence of sample size on the biological indices (H' DI, R1, J, EPT, ESB and BMI) of benthic macroinvertebrates. The 15 replicate samples were quantitatively collected from each 3 different site of two mountain streams in May, 2011. With the replicate data, we combined the abundance of each species with all the possible combinations of the sample size. Along with the increase of sample size, the number of species increased continuously and did not converge. BMI showed little difference whereas other biological indices increased or decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권2호
• /
• pp.231-235
• /
• 2006

The objectives of this study were to investigate the effects of dietary fish oil inclusion on the eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) contents and organoleptic characteristics of breast meat in mule ducks. Three hundred mule ducks at four weeks of age were randomly assigned to three dietary treatments with five replicate pens in each. One replicate pen had ten males and females each with a total of 100 ducks in each treatment. The diet in the three treatments contained 0, 1.5, and 3.0% fish oil, respectively. Body weights at 4, 6, 8, and 10 weeks of age, and feed efficiency at 4 to 6, 6 to 8, and 8 to 10 weeks of age were recorded. At 10 weeks of age, one male and one female from each replicate were sacrificed for oxidative stability of breast meat and the sacrificed males were employed for the analysis of fatty acids in breast meat and skin. Sensory evaluation of breast meat was also performed. A level of 3.0% fish oil in the diet significantly deteriorated feed efficiency and body weight gain. Dietary fish oil inclusion had a trend of increasing abdominal fat deposition and decreasing the flavor of breast meat. The EPA and DHA contents in the breast meat were higher than those in the breast skin irrespective of oil sources. The EPA and DHA contents in breast meat and breast skin was significantly increased in the 3.0% fish oil group. Although EPA and DHA were not efficiently deposited in the duck meat through dietary fish oil inclusion, this method can still provide a partial supplementation of EPA and DHA.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권3호
• /
• pp.434-442
• /
• 2008

The objective of this study was to determine the optimum ratio of methionine to methionine plus cystine for growing pigs. A nitrogen balance trial was conducted using a total of 21 barrows (Large WhiteLandrace) over two replicates. The initial body weight was $20.36{\pm}1.22kg$ (mean${\pm}$SD) in the first replicate and $23.54{\pm}1.02kg$ (mean${\pm}$SD) in the second. For each replicate, the 21 pigs were randomly assigned to one of seven dietary treatments with three observations per treatment. The diets included a methionine and cystine-deficient basal diet with all other essential nutrients meeting nutrient requirements and six diets formulated with graded levels of DL-methionine (0.00, 0.03, 0.06, 0.10, 0.13, 0.16%) and $L-Cystine{\cdot}HCl{\cdot}H_2O$ (0.19, 0.15, 0.11, 0.07, 0.04, 0.00%). This resulted in ratios of methionine to methionine plus cystine of 41.3, 29.6, 35.3, 41.2, 46.0, 51.6 and 57.5%. Each experimental period lasted 12 days consisting of a seven-day adaptation period followed by a five-day total collection of urine and feces. During the collection period, pigs were fed 900 g/day for the first replicate and 1,200 g/day for the second replicate. The feed was provided in three equal portions at 0800, 1500, and 2200 h daily. Pigs had ad libitum access to water after feeding. There was a linear (p<0.01) and quadratic (p<0.01) effect on daily gain and feed conversion as the ratio of methionine to methionine plus cystine increased. Pigs receiving the diets providing a methionine to methionine plus cystine ratio of 51.6% had the best daily gain and feed conversion. Plasma urea nitrogen was also lowest for this treatment. Nitrogen retention increased (p<0.01) as the relative proportion of methionine increased up to 51.6% and then a downward trend occurred at 57.5%. The quadratic regression model, as well as one- and two- slope regression line models, were used to determine the optimum ratio of methionine to methionine plus cystine. Eliminating the 35.3% methionine to methionine plus cystine treatment resulted in $R^2$ values in excess of 0.92. The optimal ratio of methionine to methionine plus cystine was estimated to be 54.15% for nitrogen retention and 56.72% for plasma urea nitrogen.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권2호
• /
• pp.261-266
• /
• 1992

Yearling replacement heifers were used in a two-year study at the Fort Stanton Experimental Ranch near Capitan, New Mexico, USA to compare frequency (once versus three times weekly) of feeding a cottonseed cake supplement. The study involved periods of 130 days (January 4 through May 14) in 1985, and 146 days (December 4 through April 29) in 1986. In each year, supplemental periods were just before the breeding season (natural breeding in multiple-sire groups) that lasted for 75 days during first year and 60 days during second year. During the first year, all (83) heifers (Angus $\times$ Hereford) were supplemented at a level equivalent to 45 kg/head daily and during second year, all (69) heifers (Angus $\times$ Hereford, Hereford) were fed at a level equivalent to .68 kg/head daily. In the first year, heifers were sorted by initial weight into two replications, i.e., those weighing under 223 kg were placed in replicate 1 and those weighing over 223 kg were placed in replicate 2. During the second year, heifers were sorted by breed into two replications, i.e., Angus $\times$ Hereford heifers were placed in replicate 1 and Hereford heifers in replicate 2. Each year, half of the heifers in each replication were supplemented once weekly and the other half three time weekly. Weight gains of heifers were similar for the two treatments over both years of study. During the first year, weight gains for heifers supplemented once or thrice weekly (.23 vs .21 kg daily, respectively) did not differ (p>.05) and the same trend for the second year (.15 vs .16 kg daily, respectively) was observed. Similarly, breeding performance was consistent with weight gains and no difference (p>.05) between treatments was observed either year. Lower conception rates during the second tear of study (92 vs 72% for years 1 and 2, respectively) were due mainly to involvement of Hereford heifers that had an average weight of 232 kg at the start of breeding season and conception rate of 54% (averaged across both supplemental treatments). Based on the combined results of both trials, frequency of supplementation did not affect growth rate of yearling heifers nor did it influence their subsequent conception rate.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2006년도 학술논문요약집
• /
• pp.236-237
• /
• 2006

• Journal of Microbiology and Biotechnology
• /
• 제29권11호
• /
• pp.1790-1798
• /
• 2019

Flock House virus (FHV), an insect RNA virus, has a bipartite genome. FHV RNA1 can be packaged in turnip yellow mosaic virus (TYMV) as long as the FHV RNA has a TYMV sequence at the 3'-end. The encapsidated FHV RNA1 has four additional nucleotides at the 5'-end. We investigated whether the recombinant FHV RNA1 could replicate in mammalian cells. To address this issue, we prepared in vitro transcribed FHV RNAs that mimicked the recombinant FHV RNA1, and introduced them into baby hamster kidney (BHK) cells. The result showed that the recombinant FHV RNA1 was capable of replication. An eGFP gene inserted into the frame with B2 gene of the FHV RNA1 was also successfully expressed. We also observed that eGFP expression at the protein level was strong at 28℃ but weak at 30℃. Sequence analysis showed that the 3'-ends of the RNA1 and RNA3 replication products were identical to those of the authentic FHV RNAs. This indicates that FHV replicase correctly recognized an internally-located replication signal. In contrast, the 5'-ends of recombinant FHV RNA1 frequently had deletions, indicating random initiation of (+)-strand synthesis.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.363-369
• /
• 2011

In this study, a direct pattern forming process on a plastic film using ultrasonic vibration energy is investigated. A tool horn containing micro-patterns is attached to an ultrasonic power supply, and is used to press a plastic film with ultrasonic vibration in order to replicate micro-patterns on the surface of the plastic film. To replicate micro-patterns with high accuracy, the tool horn should be designed to allow only the longitudinal vibration, not the transverse vibration. For this purpose, the design of a tool horn is investigated through finite element analysis, from which the resulting natural frequency of the tool horn can be adjusted in the range of the ultrasonic power supply. The analysis result is then reflected on the optimal design and fabrication of the tool horn. The validity of the developed tool horn is discussed through pattern-forming experiments using the ultrasonic vibration of the developed tool horn.