• 한국광학회지
• /
• 제1권1호
• /
• pp.46-51
• /
• 1990

Soft X-ray는 자연상태의 생물체를 높은 대비(high contrast)의 영상으로 관찰할 수 있는 광원이다. 1GW급의 광분해 옥소레이저 ($\lambda$=1.315$\mu\textrm{m}$, E=12.7J)를 몰리브덴(Mo) 표적에 집속시켜 플라즈마를 발생시켰으며 플라즈마에서 방출되는 넓은 파장 영역의 연속스펙트럼을 0.1$\mu\textrm{m}$ 두께의 알루미늄 필터를 거치게 하여 soft X-ray 영역에 중심세기를 갖는 광원을 얻었다. X-ray용 resist로 감도가 좋은 PBS를 사용하여 그물망(mesh), 거미줄, 적혈구의 replica를 얻었다. 본해능에 미치는 두 가지의 주된 영향인 광원의 크기에 의한 영향과 Fresnel 회절효과를 고찰하고 실험결과를 비교하였다. 본 실험에서는 0.1$\mu\textrm{m}$이하의 분해능을 얻었다.

• Journal of Animal Science and Technology
• /
• 제63권4호
• /
• pp.681-692
• /
• 2021

Environment, food, and disease have a selective force on the present and future as well as our genome. Adaptation of livestock and the environmental nexus, including forest encroachment for anthropological needs, has been proven to cause emerging infectious diseases. Further, these demand changes in meat production and market systems. Meat is a reliable source of protein, with a majority of the world population consumes meat. To meet the increasing demands of meat production as well as address issues, such as current environmental pollution, animal welfare, and outbreaks, cellular agriculture has emerged as one of the next industrial revolutions. Lab grown meat or cell cultured meat is a promising way to pursue this; however, it still needs to resemble traditional meat and be assured safety for human consumption. Further, to mimic the palatability of traditional meat, the process of cultured meat production starts from skeletal muscle progenitor cells isolated from animals that proliferate and differentiate into skeletal muscle using cell culture techniques. Due to several lacunae in the current approaches, production of muscle replicas is not possible yet. Our review shows that constant research in this field will resolve the existing constraints and enable successful cultured meat production in the near future. Therefore, production of cultured meat is a better solution that looks after environmental issues, spread of outbreaks, antibiotic resistance through the zoonotic spread, food and economic crises.

• Journal of Animal Science and Technology
• /
• 제64권4호
• /
• pp.782-791
• /
• 2022

The purpose of this study is to evaluate the effects of multiple cooling systems and different drinking water temperatures (DWT) on the performance of sows and their hair cortisol levels during heat stress. In this study, the effect of four different cooling systems: air conditioner (AC), cooling pad (CP), snout cooling (SC), and mist spray (MS), and two DWT, namely low water temperature (LWT) and high water temperature (HWT) on 48 multiparous sows (Landrace × Yorkshire; 242.84 ± 2.89 kg) was tested. The experiment is based on the use of eight replicas during a 21-days test. Different behaviors were recorded under different cooling treatments in sows. As a result, behaviors such as drinking, standing, and position change were found to be lower in sows under the AC and CP treatments than in those under the SC and MS treatments. Lying behavior increased under the AC and CP systems as compared with that under the SC and MS, systems. The average daily feed intake (ADFI) in sows and weight at weaning in piglets was higher under the AC, CP, and LWT treatments than under the SC, MS and HWT treatments. Sows subjected to SC and MS treatment showed higher hair cortisol levels, rectal temperature, and respiratory rate during lactation than those under AC and CP treatments. Hair cortisol levels, rectal temperature, and respiratory rate were also higher under the HWT than under the LWT treatment. As per the results of this study, the LWT has no significant effect on any of the behavioral factors. Taken together, the use of AC and CP cooling treatment is highly recommended to improve the behavior and to reduce the stress levels in lactating sows.

• 패션비즈니스
• /
• 제27권1호
• /
• pp.61-76
• /
• 2023

The purpose of this study was to derive exotic products handled by Bon Marche department store, examine characteristics, and reveal the meaning of exotic taste in the 19th century. The research method is literature research centered on original materials of the time, such as old literature related to department stores, and films, newspapers, magazines, and periodicals as well as books and papers. Commercial catalogs and Agenda-Buvard published by Bon Marché were used as visual materials. Results are as follows. Exotic tastes of products of the Bon Marche department store in the late 19th century showed an oriental style centered on Persia, India, China, and Japan. Products from various regions such as Turkey, Spain, Algeria, Tunisia, England, Italy, and Russia were also accepted. These exotic tastes had the following contributions and meanings. First, they expanded items and product development and activated domestic industry through production of imitations and replicas. Second, before the advent of department stores, foreign items that came to Europe were exclusive properties of a few privileged classes. However, in the late 19th century, as the number of consumers who wanted to have a new status higher than themselves increased, exotic products of the Bon Marche department store became the object of desire for material pursuits toward the upper class rather than sentimental fantasies. Third, exotic tastes gradually spread to the public as production of products imitating foreign products became possible industrially with an easy access to them. From this, it can be seen that department stores were mediators of trends and the epicenter of popularizing exotic tastes.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.53.1-53.11
• /
• 2021

Objectives: This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. Materials and Methods: A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. Results: The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). Conclusions: The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.

• Restorative Dentistry and Endodontics
• /
• 제47권4호
• /
• pp.36.1-36.17
• /
• 2022

Objectives: This study aimed to evaluate the effect of aging on the marginal quality of glass hybrid (GH) material used to elevate dentin gingival margins, and to analyze the consistency of the results obtained by 3 in vitro methods. Materials and Methods: Ten teeth received compound class II cavities with subgingival margins. The dentin gingival margins were elevated with GH, followed by resin composite. The GH/gingival dentin interfaces were examined through digital microscopy, scanning electron microscopy (SEM) using resin replicas, and according to the World Dental Federation (FDI) criteria. After initial evaluations, all teeth were subjected to 10,000 thermal cycles, followed by repeating the same marginal evaluations and energy dispersive spectroscopy (EDS) analysis for the interfacial zone of 2 specimens. Marginal quality was expressed as the percentage of continuous margin at ×200 for microscopic techniques and as the frequency of each score for FDI ranking. Data were analyzed using the paired sample t-test, Wilcoxon signed-rank test, and Pearson and Spearmen correlation coefficients. Results: None of the testing techniques proved the significance of the aging factor. Moderate and strong significant correlations were found between the testing techniques. The EDS results suggested the presence of an ion-exchange layer along the GH/gingival dentin interface of aged specimens. Conclusions: The marginal quality of the GH/dentin gingival interface defied aging by thermocycling. The replica SEM and FDI ranking results had stronger correlations with each other than either showed with the digital microscopy results.

• The Journal of Advanced Prosthodontics
• /
• 제16권4호
• /
• pp.231-243
• /
• 2024

PURPOSE. The objective of the study was to analyze the impact of cement, bonding pretreatment, and ceramic abutment material on the overall color results of CAD-CAM ceramic crowns bonded to titanium-based hybrid abutments. MATERIALS AND METHODS. For single implant restoration of a maxillary lateral incisor a total of 51 CAD-CAM-fabricated monolithic lithium disilicate crowns were fabricated and subsequently bonded onto 24 lithium disilicate Ti-base abutments, 24 zirconia Ti-base abutments and 3 resin abutment replicas as a control group. The 48 copings were cemented with three definitive and one provisional cement on both grit-blasted and non-blasted Ti-bases. The color of each restoration and surrounding artificial gingiva was measured spectrophotometrically at predefined measuring points and the CIELAB (ΔE_ab) color scale values were recorded. RESULTS. The color outcome of ceramic crowns bonded to hybrid abutments and soft tissues was affected differently by cements of different brands. Grit-blasting of Ti-bases prior to cementing CAD-CAM copings affected the color results of allceramic crowns. There was a significant difference (P = .038) for the median ΔE value between blasted and non-blasted reconstructions at the cervical aspect of the crown. Full-ceramic crowns on zirconia Ti-base abutments exhibited significantly lower ΔE values below the threshold of visibility (ΔE 1.8). In all subcategories tested, the use of a highly opaque temporary cement demonstrated the lowest median ΔE for both the crown and the artificial gingiva. CONCLUSION. Various cements, core ceramic materials and airborne particle abrasion prior to bonding can adversely affect the color of Ti-base supported ceramic crowns and peri-implant soft tissue. However, zirconia CAD-CAM copings and an opaque cement can effectively mask this darkening.

• 한국결정성장학회지
• /
• 제11권2호
• /
• pp.49-55
• /
• 2001

sol-gel방법에 의해서 p-형 Si(100)웨이퍼와 ITO glass, quartz glass기판 위 ZnO박막을 형성시켰으며 출발 물질은 zinc acetate dihydrate를 사용하였다. Zinc acetate dihydrate를 2-methoxyethanol-monoethanolamine(MEA)용액에 녹여 :균질하고 안정된 용액을 만들었다. ZnO박막은 2800rpm에서 25초 동안 spin-coating하고 $250^{\circ}C$의 hot plate에서 10분 동안 중간 열처리한 후 이를 반복하여 형성시켰고 결정화를 위한 열처리는 $400^{\circ}C$~$800^{\circ}C$공기 분위기에서 1시간 동안 시행하였다. X-ray diffraction(XRD), scanning electron microscopy(SEM), UV-vis 투과 스펙트럼, IR 투과 스펙트럼, photoluminescence(PL)스펙트럼 등의 측정 결과로부터 박막의 구조적 특성과 광학적 성질에 대해서 논의하였다. 제조된 ZnO막은 (002)면으로 정렬되어 있으며 380nm파장에서 예리한 흡수단이 있고 가시광선 영역에서 투명(투과율 70% 이상)하였는데 이 흡수단은 ZnO의 밴드 갭(3.2eV)과 잘 일치한다. 저온에서의 띠끝 PL스펙트럼은 속박된 엑시톤 복합체와 포논 복제에 의한 다중선 구조를 보인다.

• 치위생과학회지
• /
• 제13권2호
• /
• pp.135-141
• /
• 2013

본 연구는 치과에서 사용되는 심미 보철물 중에 하나인 지르코니아 기반의 전부도재관 제작 시 지르코니아 코어 위에 상부 도재를 축성하고 소성하는 과정에서 발생되는 고온이 완성된 전부도재관의 변연적합도에 미치는 영향을 분석함으로써 임상적 허용이 가능한지 알아볼 뿐 아니라, 치과보철치료를 위한 치과의사, 치과위생사, 치과기공사의 보철물 선택 시 임상적 참고자료로 제공할 목적으로 수행되었다. 심미에 가장 많은 영향을 미치는 상악 중절치를 지대치로 선정하여 동일한 모형 10개 제작 후 각각의 지대치에 적합한 지르코니아 코어를 제작하였다. 제작된 코어의 변연적합도 측정 후 코어 위에 상부 도재를 축성하여 전부도재관을 완성한 뒤 2차 측정을 실시하였으며, 측정 후 비교 분석 된 결과는 다음과 같다. 변연적합도는 지르코니아 코어 제작한 후 전부도재관으로 제작되는 과정에 따라 더 커졌으며, 통계적으로도 유의한 차이를 보였다(p<0.001). 그러나 전부도재관에서 총 80회 측정된 변연적합도의 값에서 임상적 허용 수치인 $120{\mu}m$을 넘지 않는 결과를 보였으며, 이와 같은 결과를 토대로 지르코니아 코어 위에 상부 도재 소성 시 변연적합도가 커지긴하나 임상적으로 허용이 가능하다는 결론을 도출하였다.

• 터널과지하공간
• /
• 제22권2호
• /
• pp.106-119
• /
• 2012

암석 절리면의 거칠기는 대부분 2차원 프로파일의 기하학적 특징에 초점을 맞추어 기술되어 왔다. 그러나 거칠기를 합리적으로 평가하기 위해서는 수직 및 전단하중하에서 실제 접촉 상태에 놓여 발현되는 유효 거칠기 특성을 적절히 반영할 수 있어야 한다. 본 연구에서는 편마암 인장 절리의 복제 시험편에 직접전단시험을 수행하고 전단 방향에 따른 강도 및 거칠기 특성을 고찰하였다. 이 과정에서 절리면의 3차원 형상을 삼각형 요소의 집합으로 재구성하고, 각 요소의 거칠기를 전단 방향에 따른 활성, 비활성 미세거�s각을 이용하여 정의하였다. 수치적 알고리즘을 이용하여 최대전단강도 발현 시 접촉면의 위치와 면적을 예측한 결과, 접촉면의 분포는 미세 거�s각의 분포와 밀접한 관계를 보였으며, 활성거�s각을 갖는 요소만이 전단 거동에 주도적인 역할을 수행하였다. 따라서 활성거�s각의 분포 특성을 모사할 수 있는 확률밀도함수를 제시하고, 이 과정에서 얻어지는 활성거칠 기계수 $C_r$을 암석 절리면의 새로운 거칠기 정량화 계수로 제안하였다. 각 시험편에 대한 전단방향에 따른 $C_r$과 실험 결과를 비교한 결과, $C_r$이 절리면의 거칠기를 정량화하고 전단 강도를 예측하는 데 있어 매우 유용한 파라미터임을 확인하였다.