• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2729-2734
• /
• 2011

본 논문에서는 DC 정합회로를 갖는 능동 Replica LDO 레귤레이터에 대하여 나타내었다. Replica단과 출력단의 DC전압을 정합하기 위하여 DC정합회로를 설계하였다. 능동 Replica LDO 레귤레이터의 PSR특성은 일반적인 레귤레이터 보다 큰 값을 가질 수 있다. 설계된 DC정합회로는 Replica 레귤레이터에서 발생할 수 있는 단점을 줄여준다. 또한 전체회로를 능동회로로 설계함으로써 칩면적을 줄이고 수동저항을 사용할 때 발생하는 열잡음을 제거할 수 있다. 0.35um CMOS 파라미터를 사용하여 HSPICE 시뮬레이션한 결과, DC정합회로를 이용하여 설계된 레귤레이터의 PSR특성은 -28dB@10Hz로써 DC정합회로를 사용하지 않는 일반적인 레귤레이터의 -17dB@10Hz보다 개선될 수 있음을 확인하였다. 레귤레이터의 DC출력 전압은 3V이다.

• The Journal of the Acoustical Society of Korea
• /
• 제20권1E호
• /
• pp.31-37
• /
• 2001

Matched Field Processing (MFP) is a successive process of correcting mismatches between true and assumed parameters by matching the measured acoustic field data with numerically simulated data which we call replica. The MFP is widely used both in geo-acoustic parameter inversions and in source localizations. Whether a certain parameter can be inverted effectively or whether a source can be localized correctly depends on the amount of the influence that a parameter has on the acoustic field during the matching process. Sensitive parameters can be better estimated than the less sensitive ones in MFP. On the contrary, the sensitive parameters affect adversely on the source localization results when they have uncertainties. In this paper, a sensitivity index is defined based upon the field variation resulting from the perturbed parameters. Numerical test results show that the index behaves in accordance with the results of source localization under a mismatched environment and also with the inversion solutions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.848-854
• /
• 2012

We have studied the oligomerization of a fibril-forming segment of ${\alpha}$-Synulcein using a replica exchange molecular dynamics (REMD) simulation. The simulation was performed with trimers and tetramers of a 12 amino acid residue stretch (residues 71-82) of ${\alpha}$-Synulcein. From extensive REMD simulations, we observed the spontaneous formation of both trimer and tetramer, demonstrating the self-aggregating and fibril-forming properties of the peptides. Secondary structure profile and clustering analysis illustrated that antiparallel ${\beta}$-sheet structures are major species corresponding to the global free energy minimum. As the size of the oligomer increases from a dimer to a tetramer, conformational stability is increased. We examined the evolution of simple order parameters and their free energy profiles to identify the process of aggregation. It was found that the degree of aggregation increased as time passed. Tetramer formation was slower than trimer formation and a transition in order parameters was observed, indicating the full development of tetramer conformation which is more stable than that of the trimer. The shape of free energy surface and change of order parameter distributions indicate that the oligomer formation follows a dock-and-lock process.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.9-16
• /
• 2010

Experimental examinations for evaluating fracutres were conducted by using transparent replicas of a single fracture in order to obtain the fracture data to contribute to the methodlogy on how to improve the definitaion of representative parameter values used for a parallel plate fracture model. Quantitative aperture distribution and quantitative tracer concentration data at each point in time were obtained by measuring the attenuation of transmitted light through the fracture in high spatial resolution. the representative aperture values evaluated from the multiple different measurement methods, such as arithmetic mean of aperture distribution measured by the optical method, transport aperture evaluated from the tracer test, and average aperture evaluated from the fracture void volume measurement converged to a unique value that indicates the accuracy of this experimental study. The aperture data was employed for verifying the numerical simulation under the assuption of Local Cubic Law and showed that the calculated flow rate through the fracture is 10%-100% larger than hydraulic test results. The quantitative tracer concentration data is also very valuable for validating existing numerical code for advection dispersion transport in-plane heterogeneous fractures.

• 한국지능시스템학회논문지
• /
• 제19권4호
• /
• pp.511-518
• /
• 2009

최근에 사용자 위주의 서비스 요구가 증가됨에 따라 분산 도메인의 객체 정보를 서비스하기 위한 여러 기법들이 제안되고 있다. 본 논문에서는 이와 같은 요구에 따라 신뢰성 있는 분산 도메인 객체를 서비스하기 위한 퍼지 드롭 관리기를 제안하였다. 제안된 시스템은 사본 변수 $c_{i,j}$와 접근행렬 Z를 이용하여 도메인에 접근할 수 있도록 하였으며, 도메인 내에서는 인트라 도메인 퍼지 적합도를 사상시켜 퍼지집합 사이의 관계성을 적용하여 객체들의 참조 관련성을 평가하였다. 그리고 질의를 확장하기 위해 도메인의 객체들에 대해서는 알파 레벨을 적용하여 참조 관련성에 따라 알파 레벨 집합을 생성하였다. 그 결과 우리의 기법이 다른 기법들에 비해서 성능평가가 향상됨을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.190-192
• /
• 2006

The clinical characteristics of photodamaged skin, such as coarse and fine wrinkle are not accurately evaluable with previous methods. Public awareness for wrinkle treatment and prevention which rely on proper assessment and evaluation of the underlying skin changes has been increased as the population ages. In this paper, we suggest an in-vivo method and instrument that allow us to acquire a wrinkle-enhanced image to improve the accuracy of quantitative and qualitative analysis for skin wrinkle. The method used involved white LED illumination and photography through polarizing filters. Finally, the polarized light photography yields an accurate and evaluable parameter of photodamaged skin, especially fine and coarse wrinkle.

• 한국음향학회지
• /
• 제24권2호
• /
• pp.87-96
• /
• 2005

해양환경에서 정합장처리를 통해 음원위치를 추정할 경우 실측신호의 음장과 복제음장 사이에 각종 매개변수의 오정합이 발생하여 상관값의 저하와 함께 음원 위치추정 결과에 바이어스를 발생시킨다. 본 논문에서는 정합장처리를 이용한 음원 위치추정에서 해양환경 및 시스템 오정합 매개변수로 인한 바이어스와 상관값의 변화 그리고 민감도에 대해서 고찰하였다. 이를 위해 Pekeris 해양 도파관에서 수치실험을 수행하였으며, 그 결과 매개변수 오정합이 음원 위치에서의 바이어스와 상관값의 감소를 발생시켰다. 또한 매개변수 민감도 평가를 통해 배열의 경사와 수심, 해저면 수심과 해저층의 음속이 민감도가 높음을 확인 할 수 있었다.

• 한국통신학회논문지
• /
• 제32권5A호
• /
• pp.409-416
• /
• 2007

In cellular orthogonal frequency division multiplexing (OFDM) networks, co-channel interference (CCI) leads to severe degradation in the BER performance. To solve this problem, maximum-likelihood estimation (MLE) CCI cancellation scheme has been proposed in the literature. MLE CCI cancellation scheme generates weighted replicas of the transmitted signals where weights represent the estimated channel transfer functions. The replica with the smallest Euclidean distance from the received signal is selected and data are detected. When the received power of the desired and interference signals are nearly the same, the BER performance is degraded. In this paper, we propose a closed-loop power control (PC) scheme capable of detecting the equal received power situation at the mobile station (MS) receiver by using the newly introduced parameter power ratio (PR). When this situation is detected, the MS sends a feedback to the desired base station (BS) which boosts the transmission power in the next frame. At cell edge where signal to interferer ratio (SIR) is considered to have average value between -5 dB and 10 dB, computer simulations show that the proposed CCI cancellation scheme has a gain of 7 dB at 28 Km/h.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.69-76
• /
• 1997

The rotating bending fatigue tests were performed using the specimens taken from Cr-Mo-V steel, widely sued in thermal power plant turbines, at various temperatures such as room temperature, 300 .deg. C, 425 .deg. C and 550 .deg. C. The characteristics of fatigue crack propagation were examined and analyzed by using fracture mechanics parameter. The plastic replica method was also applied in order to measure the crack length on the basis of serial observation of fatigue crack propagation behavior on the defected specimen surface. The fatigue crack propagation behavior of Cr-Mo-V steel was investigated within the frame work of elastic-plastic fracture mechanics. The propagation law of fatigue crack is obtained uniquely by using the term .sigma. $^{n}$ sub a/where .sigma. $_{a}$ is the service stress, a is the crack length and n is a constant. The values of constant n are nearly equal to 2.48, 2.60 and 8.61 at room temperature, 300 .deg. C and 425 .deg. C.