• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.107-115
• /
• 2013

Purpose: This study was conducted to investigate the change of soft contact lens parameters after eyeliner deposition and compare the cleaning efficiency and the recovery rate of lens parameters by different cleaning methods. Methods: The eyeliner was deposited on three types of soft contact lenses made of different materials for 1 hour, 4 hours and 6 hours and those lenses were washed by the eyeglasses ultrasonic cleaning and by hands. The changes in visible light transmittance, diameter and surface of those lenses were compared before and after cleaning of the lens. Results: The visible light transmittance of soft contact lenses decreased along with the deposition time of eyeliner. The patterns of the eyeliner deposition on soft contact lens appeared differently depending on the physical properties of the lens material. Thus, the largest eyeliner deposition was found on narafilcon A lens. The diameters of hilafilcon B and etafilcon A lenses were decreased, however, the diameter of narafilcon A lens was increased. The cleaning efficiency of the eyeliner deposition was greater with the multipurpose solution by hands than with the eyeglasses ultrasonic cleaner. However, the recovery of lens parameters such as the lens diameter, visible light transmittance and lens surface due to the eyeliner deposition to its original state was limited. Conclusions: From these results, it is suggested to minimize eye makeup when wearing soft contact lens. Furthermore, the reduced wearing time and shorter cycle of lens replacement may be needed by considering a change of lens parameter when the repeat eye makeup is applied.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.3
• /
• pp.243-249
• /
• 2009

This study was conducted to determine the proper inclusion levels of squid liver powder (SLP) and dehulled soybean meal (DHSM) as a fish meal (FM) replacement in the diets for olive flounders. All the experimental diets were formulated to be isonitrogenous (50% crude protein, CP) and isocaloric (17.1 kJ energy $g^{-1}$ diet). Four diet were formulation of FM with SLP (DHSM) were tested at 0, 25, 50, 75% (SLP(DHSM)$_0$, SLP(DHSM)$_{25}$, SLP(DHSM)$_{50}$ and SLP(DHSM)$_{75}$, respectively). Triplicate groups of 12 fish with an average body weight of 5.56$\pm$0.1 g (mean$\pm$S.D.) were fed one of three experimental diets for 7 weeks. Weight gain (WG) and the specific growth rate(SGR) of fish fed SLP(DHSM)$_0$ and SLP(DHSM)$_{25}$ diets were significantly higher than those of fish fed SLP(DHSM)$_{50}$ and SLP(DHSM)$_{75}$ diets (P<0.05). Also, WG and SGR of fish fed SLP(DHSM)$_{50}$ had significantly higher WG and SGR than that of fish fed SLP(DHSM)$_{75}$ (P<0.05). The feed efficiency (FE) and protein efficiency ratio (PER) of fish fed SLP(DHSM)$_0$ and SLP(DHSM)$_{25}$ were significantly higher than those fed SLP(DHSM)$_{50}$ and SLP(DHSM)$_{75}$ (P<0.05). The whole-body crude lipid content of fish SLP(DHSM)$_{75}$ was significantly higher than that of fish fed SLP(DHSM)$_{50}$ (P<0.05). However, there were no significant differences in whole-body moisture, crude protein and crude ash of fish fed all diets. Based on these growth performance results, the SLP(DHSM) combination replace up to 25% FM protein by the ANOVA test in juvenile olive flounder diets.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.681-698
• /
• 2020

The paper addresses contribution to the modeling and optimization of major machinability parameters (cutting force, surface roughness, and tool wear) in finish dry hard turning (FDHT) for machinability evaluation of hardened AISI grade die steel D₃ with PVD-TiN coated (Al₂O₃-TiCN) mixed ceramic tool insert. The turning trials are performed based on Taguchi's L₁₈ orthogonal array design of experiments for the development of regression model as well as adequate model prediction by considering tool approach angle, nose radius, cutting speed, feed rate, and depth of cut as major machining parameters. The models or correlations are developed by employing multiple regression analysis (MRA). In addition, statistical technique (response surface methodology) followed by computational approaches (genetic algorithm and particle swarm optimization) have been employed for multiple response optimization. Thereafter, the effectiveness of proposed three (RSM, GA, PSO) optimization techniques are evaluated by confirmation test and subsequently the best optimization results have been used for estimation of energy consumption which includes savings of carbon footprint towards green machining and for tool life estimation followed by cost analysis to justify the economic feasibility of PVD-TiN coated Al₂O₃+TiCN mixed ceramic tool in FDHT operation. Finally, estimation of energy savings, economic analysis, and sustainability assessment are performed by employing carbon footprint analysis, Gilbert approach, and Pugh matrix, respectively. Novelty aspects, the present work: (i) contributes to practical industrial application of finish hard turning for the shaft and die makers to select the optimum cutting conditions in a range of hardness of 45-60 HRC, (ii) demonstrates the replacement of expensive, time-consuming conventional cylindrical grinding process and proposes the alternative of costlier CBN tool by utilizing ceramic tool in hard turning processes considering technological, economical and ecological aspects, which are helpful and efficient from industrial point of view, (iii) provides environment friendliness, cleaner production for machining of hardened steels, (iv) helps to improve the desirable machinability characteristics, and (v) serves as a knowledge for the development of a common language for sustainable manufacturing in both research field and industrial practice.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.2
• /
• pp.146-153
• /
• 2012

This study examined the effect of formulated diets (composed of condensed freshwater $Chlorella$ or $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil sources derived from baker's yeast) on the population growth and fatty acid composition of the brackish water flea ($Diaphanosoma$ $celebensis$) to determine diet effectiveness for mass production. Results indicated that the highest maximum density, fecundity, and population specific growth rate (SGR) of the flea were observed using a diet of $Tetraselmis$ $suecica$ (control). However, results using condensed freshwater $Chlorella$ and the mixed treatment of $Schizochytrium$ sp.+$Crypthecodinium$ sp.+EPA oil did not significantly differ from the control treatment ($P$>0.05). Thus, $T.$ $suecica$ could be replaced with a combination diet of $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil in condensed freshwater $Chlorella$ without growth interruption of $D.$ $celebensis$. As the percentage of combination diet (mix of $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil) in condensed freshwater $Chlorella$ increased, the level of ARA, EPA, DHA, and n-3 HUFA in $D.$ $celebensis$ also increased. However, the population density of $D.$ $celebensis$ sharply decreased with the use of treated supplements C5M5 (CHL [50%] and $Crypthecodinium$ sp.+ $Schizochytrium$ sp. + EPA oil [MIX 50%]). The optimum proportions of CHL and MIX for $D.$ $celebensis$ within the mixture were 70% and 30%, respectively. Based on the results, the combination of $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil in condensed freshwater $Chlorella$ appears to be a stable and effective food source for mass production of $D.$ $celebensis$.

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.203-210
• /
• 2017

This study was performed to verify the replacement of COD to TOC, which is more accurate and reliable in analysis, as the water quality pollution index and to investigate the characteristics of water quality and the correlations for organic matter, suspended solids and nutrient materials during 2012 to 2015. The oxidation rates were compared by calculating the values of BOD-C/TOC & COD-C/TOC. The average value of TOC was 3.4(1.1 ~ 8.0) mg/L at 14 sites during the period. The ratios of BOD-C/TOC and COD-C/TOC, that mean the resolvability amounts among all carbon materials, were 28.8% and 62.7%, respectively. The correlation coefficient of TOC to COD at all sites was 0.718 (p<0.01), the highest value in comparing all items. The correlation coefficient of TOC to COD at Gwangju stream was 0.753 (p<0.01), the highest compare to the values at other rivers. The correlation coefficient of TOC to COD was 0.757 (p<0.01) at all sites in the range of TP-III ($0.1{\leq}TP$) and the value was 0.762 (p<0.01) in the range of TN-II ($2.0{\leq}TN$<3.0). As a result, TOC could be used as a water pollution index of organic matter instead of COD.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.973-981
• /
• 2002

Recently, the use of high strength concrete (HSC) has increased dramatically md however, few studies have been conducted on the early-age properties of HSC such as setting. The penetration resistance test (specified by KS F 2436) that is the standard test method for determining initial and final setting times of concrete, may not be appropriate for HSC because of the high viscosity of the mortar mixture. To address this issue, an ultrasonic pulse velocity (UPV) monitoring system was used to investigate the setting behavior of mortar and concrete. The experimental study was carried out to measure the UPV's of mortars and concretes having various water/binder ratios (W/B) and various fly ash replacement levels, during the first 24 hours of testing. Test results showed that the UPV in concrete was developed faster than that of mortar with the same W/B, and that of ordinary concrete was greater than that of fly ash concrete. Typical values of UPV were suggested that correspond to the initial and final setting times, based on following criteria: (1) the penetration resistance method; (2) the instant when the UPV begins to develop; and (3) the instant when the UPV development rate is maximum. The method and UPV monitoring device used in this study is promising for the setting assessment of concrete, particularly for HSC.

• Journal of Life Science
• /
• v.30 no.6
• /
• pp.563-569
• /
• 2020

Oncoplastic surgery (OPS) combines oncologically safe tumor resection with aesthetically satisfying reconstruction of defects using established plastic surgery techniques. OPS is characterized by initial excision as extensive as is beneficial for oncological safety, and, once sufficient resection is complete, displacement or replacement techniques are selected based on remnant volume. The size of the lesion and the individual patient are important factors when considering the appropriate approach, and when pre-operative imaging, including MRI, is used to determine the technique, the complete removal of cancer cells by permanent pathology is essential. A frozen section is used during the operation to reduce the reoperation rate, but it is difficult to cover the entire margin surface theoretically and even harder in practice. A recent report about adequate margins has empowered OPS in its oncological safety. Considering the patients to whom each modality could be applied, basic breast volume is an important factor, and this is influenced by ethnic differences. In Europe or the US, for example, the average breast size is 36D (600 ㎤) and reduction mammoplasty is predominantly used. However, the average size of patients in our institution is 33A (300 ㎤), and so quite different approaches are selected in most cases. New techniques involving radiofrequency and fluorescence have been proposed as safe and easily accessible ways of reducing complications.

• Journal of Mushroom
• /
• v.14 no.1
• /
• pp.1-5
• /
• 2016

To minimize cultivation costs, prevent insect-pest infestation, and improve the production efficiency of thermophilic mushrooms, plant substrates obtained from local areas in Cambodia were used for production of both spawn and mushrooms. In this experiment, different sawdusts different organic wastes and grain ingredients and analyzed for improvement of spawn-production efficiency. Four thermophilic mushroom species, Pleurotus sajor-caju (oyster mushroom, Sambok), Ganoderma lucidum (deer horn shaped), Auricularia auricula (ear mushroom), and Lentinula edodes (shiitake), were used to identify efficient new substrates for spawn and mushroom production. Although the mycelia in the rubber tree sawdust medium showed a slightly slower growth rate (10.9 cm/15 days) than mycelia grown in grains (11.2 cm/15 days in rice seeds), rubber tree sawdust appeared to be an adequate replacement for grain spawn substrates. Th findings indicate that rubber tree sawdust, sugarcane bagasse, and acacia tree sawdust supplemented with rice bran and calcium carbonate could be new alternative the substrates for. Although sugarcane bagasse and rubber tree sawdust showed similarly high biological efficiencies (BE) of 60% and 60.8%, respectively, acacia tree sawdust exhibited relatively a low biological efficiency of 22.4%. However, it is expected that acacia sawdust has potential for the mushroom cultivation when supplemented with currently used sawdust substrates in Cambodia, because of its relatively low price. The price of the sawdust (20 kg sawdust= 6500 Riel or 1.6 USD) currently used was 6.5 times higher than the price of acacia sawdust (201000 Riel or 0.25 USD). Therefore, utilization for acacia sawdust for mushroom cultivation could become feasible as it would reduce by producing costs of mushrooms in rural areas of Cambodia.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1403-1411
• /
• 2002

The aims of this study were, firstly, to analyze the biochemical compositions of serum and follicular fluid (FF) from prepubertal gilts after PMSG (1,000 IU) treatment. The concentrations of total proteins, lipids, cholesterol, glucose and sex hormones (progesterone, $P_4$; estradiol-$17{\beta}$, $E_2$; testosterone, T) were measured. Secondary, the effects of porcine FF (pFF) addition (40% and 100%) in IVM media and different culture conditions [Exp. 1: mBMOC-2+20% porcine serum (PS), fresh IVM medium, filtered IVMconditioned medium, or rabbit oviducts; Exp. 2: mBMOC-2+20%PS or stepwise medium replacement procedures (SMRP) cocultured with or without cumulus cells] on the in vitro development (IVD) of porcine oocytes were also examined. Results showed that no significant differences were found in total protein levels between serum and pFF from different sizes (large, >7 mm; medium, ~5-7 mm; small, <3-5 mm) of follicles (75-85 and 49-90 mg/dl; p>0.05). Total lipid concentrations remained constant in serum (395-472 mg/dl), and reduced significantly in the pFF from large follicles (287 mg/dl) at 132 h after PMSG treatment when compared to those at other time points (441-480 mg/dl). Basal cholesterol levels in serum and pFF at 12 h were similar (153-161 mg/dl), but increased at 36 h (186-197 mg/dl). Basal P4 and E2 levels in serum (0.1 ng/ml and 5.5 pg/ml) were low, but increased from 0.34 ng/ml and 12.13 pg/ml at 24 h to 0.81 ng/ml and 61.70 pg/ml at 98 h, respectively, after PMSG treatment (p<0.05). P4 levels increased linearly in pFF from large follicles during 12 through 132 h (138-1,288 ng/ml). A similar increase was also observed in $E_2$ levels (22-730 pg/ml) before 60 h post PMSG treatment, and then dropped afterwards (730-121 pg/ml). The development of the oocytes fertilized in 40% pFF-medium was greater than that in 100% pFF-medium group without gonaodtropin addition (31% vs 10%, p<0.05). However, both were lower than those in mBMOC-2+20%PS and in rabbit oviducts (p<0.05). When cocultured with cumulus cell monolayers, a greater cleavage rate was observed in the group cultured in filtered IVM-conditioned medium than the SMRP group (36% vs 18%, p<0.05). A similar phenomenon was also observed in the culture without cumulus cell monolayers (33% vs 19%, p<0.05). It is concluded that neither the fresh IVM nor filtered IVM-conditioned medium has positive effect on the IVD of oocytes. Coculture with cumulus cell monolayers and the SMRP were not beneficial to the development of IVF pig oocytes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.960-966
• /
• 2004

The purpose of this study was to evaluate the effects of protein supplementation of green tea waste (GTW) on the performance of lactating cows. Another aim was to increase resource utilization and to eliminate any environmental negative impact from the tea waste. GTW from a beverage company was ensiled at a low pH (<4.0) and high acetic acid and lactic acid concentration, and it contained high crude protein (CP, 34.8%), total extractable tannins (TET, 9.2%) and condensed tannin (CT, 1.7%). Two experiments were conducted to investigate the palatability and performance in lactating cows fed GTW. In the palatability trial, three lactating cows were allocated to three dietary treatments in a 3$\times$3 Latin square design. The animals were offered a total mixed ration (TMR) including GTW at rates of 0, 2.5 and 5.0% on a dry matter (DM) basis. Total DM intake was not different among the treatments. In the performance trial, four lactating cows were used in a 2$\times$2 Latin square design with a 3 week sampling period. GTW was incorporated into TMR at a rate of 5.0% on a DM and 10.0% on a CP basis. Thus GTW replaced alfalfa hay and soybean meal at a level of 25.0% on a DM. DM and CP intake were not affected by the inclusion of GTW, whereas TET and CT intake were significantly increased (p<0.001). Milk production, milk composition and the efficiency of milk production were not altered by the GTW inclusion. Although ruminal pH and VFA, and blood urea nitrogen were not changed, ruminal $NH_{3}-N$ and plasma total cholesterol were relatively low in the GTW group, but not significantly different. The excretion of urinary purine derivatives and estimated MN supply were also not significantly affected by GTW treatment. It is therefore concluded that GTW can be used as a protein source without any detrimental effects on the performance of lactating cows.