• Journal of the Korean Geosynthetics Society
• /
• v.17 no.3
• /
• pp.19-32
• /
• 2018

Gravel Compaction Pile (GCP) method is currently being designed and constructed by empirical method because quantitative design method has not been developed, leading to various types of and frequent destruction such as expansion failure and shear failure and difficulties in establishing clear cause and developing measure to prevent destruction. In addition, despite the difference with domestic construction equipment and material characteristics, the methods applied to the overseas ground is applied to the domestic as it is, leading to remarkable difference between applied values and measured values in variables such as bearing capacity and the settlement amount. The purpose of this study was, therefore, to propose a reasonable and safe design method of GCP method by analyzing the settlement and stress behavior characteristics according to ground strength change under GCP method applied to domestic clay ground. For the purpose, settlement amount of composite ground, stress concentration ratio, and maximum horizontal displacement and expected location of GCP were analyzed using ABAQUS. The results of analysis showed that the settlement and Settlement reduction rate of composite ground decreased by more than 60% under replacement ratio of 30% or more, that the maximum horizontal displacement of GCP occurred at the depth 2.6 times pile diameter, and that the difference in horizontal displacement is slight under replacement ratio of 30%.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.705-713
• /
• 2016

For the soft ground construction, the factors not considered in the design stage occurs in the construction stage so that they cause the increase of the construction cost due to the structural stability and the design change. The subject of the study is the construction section of the industrial complex access road made in the Ochang region of Chungcheongbuk-do. The study is concerned with selecting the soft ground handling method such as the replacement method using rock debris and the surcharge reflecting the service load as the soft ground handling measure and analyzing the effect of reducing the construction cost with the stability of structures and the reduction of the construction period. The soft ground in the study section consists of sandy and cohesive soil and is 2.4m to 5.5m deep. It is distributed unevenly between the 1.5m to 5.9m stratums under the ground surface. Settlement is not serious, but the future uneven settlement and difference are expected so that the future settlement behavior is estimated by analyzing the site measurement results after the soft ground treatment. Moreover, in consideration of the regional characteristics and economic efficiency, soil with good quality is replaced with rock debris as the replacement material so that 29% of the construction cost is reduced due to the increase of stability and the reduction of duration. If the estimation of the dispersion of the pore water pressure within the dam body and the change of the underground water level and the relation of the actually measured soft ground with consolidation is studied further on the basis of the study, it is expected that the behavior of the soft ground will be correctly estimated in various site conditions.

• The Korean Journal of Nuclear Medicine
• /
• v.16 no.2
• /
• pp.29-36
• /
• 1982

Quantification of the regurgitation amount is important before and after valvular replacement surgery. Until now cardiac catheterization with cineventriculography, echocardiography have been used to measure the regurgitation amount, but also have many limitations. EKG gated cardiac blood pool scan provides a simple, non-invasive -method for quantify the regurgitation amount. By calculating the ratio of left ventricular to right ventricular stroke counts (stroke volume ratio) in gated bood pool scan, we measured the left ventricular regurgitation amount in 28 cases of valvular regurgitation and 25 cases of normal group. 1. Stroke volume ratio was higher in cases of valvular regurgitation $(2.11{\pm}0.58)$ than in cases of normal control $(1.15{\pm}0.31)$. (p<0.01). 2. Stroke volume ratio was classified by regurgitation grade using X-ray cineventriculography. In grades of mild regurgitation $(Grade\;I{\sim}II)$, stroke volume ratio was $2.02{\pm}0.29$, and in grades of severe regurgitation $(Grade\;III{\sim}IV)$, stroke volume ratio was $2.55{\pm}0.34$, so stroke volume ratio was well correlated with the grade of X-ray cineventriculography. 3. Stroke volume ratio was classfied by functional class made in New York Heart Association. In classes of mild regurgitation $(class\;I{\sim}II)$, stroke volume ratio was $2.08{\pm}0.26$, and in classes of severe regurgitation $(class\;III{\sim}IV)$, stroke volume ratio was $2.55{\pm}0.38$, Stroke volume ratio well represented the functional class. 4. After aortic and mitral valve replacement in 28 patients, the stroke volume ratio, decreased from $2.11{\pm}0.58\;to\;1.06{\pm}0.26$. Gated blood pool scan provides a noninvasive method of qnantifying valvular regurgitation and assessing the result of surgical interventions.

• Journal of Chest Surgery
• /
• v.44 no.3
• /
• pp.220-224
• /
• 2011

Background: We investigated changes in the International Normalized Ratio (INR) and its measurement interval in patients with thromboembolic events who were treated by low intensity anticoagulation therapy after isolated mechanical aortic valve replacement. Materials and Methods: Seventy-seven patients who underwent surgery from June 1990 to September 2006 were enrolled in the study and observed until August 2008. The patients were followed up at 4~8 week intervals and their warfarin (Coumadin)$^{(R)}$ dosage was adjusted aiming for a target range of INR 1.5~2.5. The rate of thromboembolic events was obtained. Changes in the mean INR and INR measurement interval were comparatively analyzed between the normal group (event free group, N=52) who had no anticoagulation-related complications and the thromboembolic group (N=10). Hospital records were reviewed retrospectively. Results: The observation period was 666.75 patient-years. Thromboembolic events occurred in 10 patients. The linearized occurrence rate of thromboembolism was 1.50%/patient-years. Actuarial thromboembolism-free rates were $97.10{\pm}2.02%$ at 5 years, $84.30{\pm}5.22%$ at 10 years, and $67.44{\pm}12.14%$ at 15 years. The percentages of INR within the target range and mean INR were not statistically significantly different for the normal and thromboembolic groups. However, the mean INR during the segmented period just before the events showed a significantly lower level in the thromboembolic group (during a 4 month period: normal group, $1.86{\pm}0.14$ vs. thromboembolic group, $1.50{\pm}0.28$, p<0.001). The mean intervals of INR measurement during the whole observation period showed no significant differences between groups, but in the segmented period just before the events, the interval was significantly longer in thromboembolic group (during a 6 month period: normal group, $49.04{\pm}9.47$ days vs. thromboembolic group, $65.89{\pm}44.88$ days, p<0.01). Conclusion: To prevent the occurrence of thromboembolic events in patients who receive isolated aortic valve replacement and low intensity anticoagulation therapy, we suggest that it would be safe to maintain an INR level above 1.8 and to measure the INR at least every 7~8 weeks.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.824-839
• /
• 2020

The current study was aimed to examine the effect of partial or complete replacement of fishmeal (FM) with fermented soybean meal (FSBM) on growth performance, fecal composition, and meat quality in broiler chickens. A total number of 240 one-day-old broiler chicks were randomly allotted into four dietary treatments with six replications and ten birds per one pen. Dietary treatments were followed as; 1) Diet incorporated with 4% FM without FSBM (Control), 2) Diet incorporated with 3% FM and 2% FSBM (FSBM2), 3) Diet incorporated with 2% FM and 3% FSBM (FSBM3) and 4) Diet incorporated with 4% FSBM without FM (FSBM4). Body weight and feed intake were recorded weekly for 35 days of the experimental period. Moreover, fecal samples were collected to evaluate moisture, ash, nitrogen, calcium and phosphorus content on day 21 post-hatch. On day 35, two birds were sacrificed from each pen to measure meat quality parameters and visceral organ weights. Results revealed that, no dietary treatment effect (p > 0.05) was observed either in both body weight or average daily gain of broilers within the entire experimental period while broilers fed FSBM2 increased (p < 0.05) average daily feed intake by 10.07% whereas FSBM4 improved (p < 0.05) feed efficiency ratio by 8.45% compared to birds fed other dietary treatments on day 7 post-hatch. Besides, birds fed FSBM3 obtained the improved (p < 0.05) feed conversion ratio over the birds fed control diet by 7.51% from hatch to day 35 post-hatch (1.60 vs. 1.73). Nevertheless, no difference (p > 0.05) was detected on visceral organ weight, proximate composition and physicochemical characteristics of meat while broilers offered FSBM4 obtained the lowest (p < 0.05) calcium and phosphorous in faces (2.27% and 1.21% respectively) over those offered control feed and other FSBM treatments. In conclusion, FSBM would be a better replacement for ousting FM partially or completely in broiler diet as it did not impair the growth performance and meat quality while reducing the calcium and phosphorous excretion in broilers for 35 days post-hatch.

• Korean Institute of Interior Design Journal
• /
• v.14 no.1
• /
• pp.100-108
• /
• 2005

If remodeling is defined as activities that restore the overall function of a building up to the standards currently demanded rather than as a simple replacement or repair of old facilities and equipment, the main task of remodeling should be the reduction in differences between areas, establishment of a functional linkage between departments and setup of a smooth circulation system. Therefore, this study is an analysis of remodeling strategies and construction processes to resolve major tasks of remodeling. Through this research we acquire concluding remarks. 1) The remodeling strategies of equipment-intensive areas can be divided into two measures: utilizing the existing buildings (the main buildings) the most, and of concentrated relocation in the new buildings. The former method is advantageous in that the main building serves as a center in hospital layouts because concentrated placement of the diagnosis/ treatment area and the supply area benefit the overall operation in terms of functions. However, the measure has limits in that it is difficult to install the facilities and equipment of the new demands due to the low ceilings, which serve as a potential challenge in future growth and changes. 2) The latter measure is the one in which equipment-intensive areas and the areas that are absolutely short of space are first placed in the new buildings while other areas (the outpatient area, the administration area and the miscellaneous areas) are in the existing building (main building). Given the possibility of development In the future, concentrated placement in the new buildings can be said to be more effective order to actively address future growth and changes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.199-205
• /
• 2015

The mechanical and thermal properties of high temperature aluminate cementitious thermal storage materials were investigated in this paper. Alumina cement was used as basic binder and the effect of the replacement of fly ash, silica fume, calcium sulfo-aluminate and graphite for alumina cement was investigated. Experiments were performed to measure mechanical properties including compressive strength before and after thermal cycling, and split tensile strength, and to measure thermal properties including thermal conductivity and specific heat. Test results show that the residual compressive strengths of mixtures with alumina cement only, or alumina cement and silica fume were greater than those of the others. Additionally, the specific heat of mixture with graphite was largest in all the mixtures used in the study. The results of this study could be used to provide realistic information for material properties in thermal energy storage concrete in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.431-438
• /
• 2017

In this paper, the abdomen ECG(AECG) is employed to measure the mother's ECG instead of the conventioanl thoracic ECG measurement. The fetus ECG signal can be extracted from the AECG using an algorithm that utilizes the mobile fetal ECG measurement platform, which is based on the BLE (Bluetooth Low Energy). The algorithm has been implemented by using a replacement processor processed directly from the platform BLE instead of the large statistical data processing required in the ICA(Independent component analysis). The proposed algorithm can be implemented on a mobile BLE wireless ECG system hardware platform to process the maternal ECG. Wireless technology can realize a compact, low-power radio system for short distance communication and the IOT(Intenet of Things) enables the transmission of real-time ECG data. It was also implemented in the form of a compact module in order for mothers to be able to download and store the collected ECG data without having to interrupt or move the logger, and later link the module to a computer for downloading and analyzing the data. A mobile ECG measurement prototype is manufactured and tested to measure the FECG for pregnant women. The experimental results verify a real-time FECG extraction capability for the proposed system. In this paper, we propose an ECG measurement system that shows approximately 91.65% similarity to the MIT database and the conventional algorithm and SNR performance about 10% better.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.323-330
• /
• 2018

The growth of the older population is expected to further increase social problems associated with population aging, such as isolation, poverty, and depression. The emerging issues associated with the older population are also expected to provide further momentum on studies about the dwelling environment as factors that ensure the health of older people as well as improve their quality of life. Therefore, approaches for explaining the issues of the older age group should be diversified using a variety of factors and appropriate analytic tools. Studies on measuring depression have principally focused on assessing an objective self-report questionnaire, usually in a highly structured, textual form which may not reflect the cognitive impairment of older adults. The aim of this study was to define and measure dwelling depression among older adults in Korea. There are two specific hypotheses in this study as follows: (a) there will be statistically significant relationships with dwelling dissatisfaction and depression, and (b) dwelling depression tools containing text and images will be, respectively, assessment tools that have a good construct with content validity and reliability. In the first experiment, to define and measure dwelling depression, 301 people over 65 years old living in single and two-person households were surveyed using a text-based dwelling depression questionnaires from September 1-30, 2017. In the second experiment, to examine whether the projective image questionnaire could serve as a suitable replacement for the text-based questionnaires, the same participants were surveyed from January 22 to February 2, 2018. The results show that depression has a close correlation with dwelling dissatisfaction. In addition, the geriatric dwelling depression index (GDDI) based on the projective image was refined. Additionally, the projective image questionnaire has a close correlation with the text-based questionnaire. Finally, through ROC curve analysis, it was found that the projective image questionnaire can accurately predict a depression group. To this end, this preliminary study examined the validity of the projective image questionnaire in older adults to make this instrument feasible for older populations and to contribute to a profound understanding of geriatric depression due to the living environment. We hope they will provide a basis for further research on psychological diagnoses using projective images.

• Journal of Information Technology Services
• /
• v.20 no.5
• /
• pp.89-104
• /
• 2021

Food delivery service combined with IT technology and HMR (Home Meal Replacement) are rapidly growing due to the COVID-19. Recently, the demand for salads along with HMR has increased among office workers in their 20s and 30s who are interested in health and beauty. Freshcode is a food startup with 6 years of experience that started selling salad products through O2O service. Freshcode applied for a patent for a service that collects orders from nearby areas and delivers them on the same day to a designated delivery address 'FCOSPOT' to save shipping costs. In March 2021, in recognition of the growth potential of the regular delivery service, Freshcode received an investment of 6 billion won in Series A. This study may have practical implications to early-stage startups and scale-up stage startups through a longitudinal case study on the growth of a single company. As for the research method, the lean startup methodology and lean canvas were used in the early stage of startup. In particular, the process of the build-measure and learn feedback-loop, which is the core of lean startup methodology, was applied to each major decision-making step. In the scale-up stage after 5 years, the business model canvas was used to schematize the growth as a food online O2O platform to verify continuous innovation. This case study has three main findings. First, the idea of 'FCOSPOT' was successfully implemented through the Lean Startup methodology. Second, Freshcode demonstrated the scalability of the differentiated business model of shared base delivery O2O. Third, a key factor of success was the digital integrated communication operation strategy that maximizes the experience for the created customers.