• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.260-270
• /
• 2018

Purpose: The purpose of this study is to evaluate the life of the capsule, which is a core part of the heat storage cooling system. This paper will develop a life test mode that can reproduce environment conditions through the analysis of capsule shrinkage and expansion characteristics. Methods: In order to determine the life test mode of the capsule, this paper analyzed the case of field failures and analyzed the deformation characteristics according to the pressure fluctuation of the capsule. The method to find out whether the field failure and deformation analysis results are consistent is the testing with the construction of the repetition pressure test equipment and the thermal cycle test to reproduce the freezing and thawing characteristics. Results: In this study, failure mode analysis and analysis of freezing and thawing characteristics regarding to the capsule positions were completed. Based on this test & analysis results, this paper have been able to determine the main parameters for determining the life test mode, the freezing and thawing time. Conclusion: Determining the lifetime mode of the capsule can be used to improve the life and performance of the thermal storage system.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.19-23
• /
• 2000

Partial discharges(PD)in air insulated electric power apparatus often lead to deterioration of solid insulation by electron bombardments and electrochemical reaction. The PD caused to reduce the life time of power apparatus and to increase power losses. Thus understanding and classification of PD patterns in air are very important to discern sources of PD. In this paper, PD in air by using statistical methods was investigated. We classified air discharges, corona, surface discharges and cavity discharges by Kohonen network. For classification of PD patterns, we used statistical operators and parameters such as skewness$(S^+,\; S^-),\; kurtosis(K^+, K^-),\; mean phase(AP^+, AP^-)$, cross-correlation factor(CC) and asymmetry derived from the mean pulse-height phase distribution$(H_{avg}(\phi))$, the max pulse-height phase distribution $(H_{qmax}(\phi))$, the pulse count phase distribution $(H_n(\phi))$ and the pulse height vs. Repetition rate $(H_q(n))$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.2
• /
• pp.130-140
• /
• 1993

Average particle deposition velocity toward a horizontal semiconductor wafer in vertical airflow is measured by a wafer surface scanner(PMS SAS-3600). Use of wafer surface scanner requires very short exposure time normally ranging from 10 to 30 minutes, and hence makes repetition of experiment much easier. Polystyrene latex (PSL) spheres of diameter between 0.2 and $1.0{\mu}m$ are used. The present range of particle sizes is very important in controlling particle deposition on a wafer surface in industrial applications. For the present experiment, convection, diffusion, and sedimentation comprise important agents for deposition mechanisms. To investigate confidence interval of experimental data, mean and standard deviation of average deposition velocities are obtained from more than ten data set for each PSL sphere size. It is found that the distribution of mean of average deposition velocities from the measurement agrees well with the predictions of Liu and Ahn(1987) and Emi et al.(1989).

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.397-402
• /
• 1996

A compact excimer laser was developed with coaxial type which the one line cross flow fan is only used. At 1 kHz repetitive operation, average power of KrF laser is 56 watt. In this paper, Design parameter and CR characteristic are investigated for attainment of the compact 1 kHz excimer laser. We have obtained overall efficiency of 1.2% with KrF laser gas. At this time, CR and the variation of laser output are 2.97, $\pm$9%. Laser gas volume and active volume are 10 liter, 1.8(H)$\times$1.2(W)$\times$30(L)=64.8 ㎤, respectively.

• Korean Journal of Adult Nursing
• /
• v.18 no.5
• /
• pp.781-789
• /
• 2006

Purpose: This study is to examine the effect of auricular acupressure therapy on smoking cessation for male adult in rural areas. Method: Research design was nonequivalent control pretest-posttest design. The samples were 90 male adults(Experimental: 40, Control: 40) in a community. Measures were the number of cigarette smoking per day, dependency on nicotine, and need for smoking. Auricular acupressure therapy, experimental treatment was applied for 2 weeks, 2 times/week, 3 day/time. Data were collected from June 2005 to December 2005. Data were analyzed using SPSS PC+ 12 version. Descriptive statistics, independent t-test, ${\chi}^2-test$, were used for each aim of this study. Results: The number of cigarette smoking per day (t= 13.230, p=.000), dependency on nicotine (t=-29.743, p=.000), and need for smoking (t=-19.799, p=.000) were significantly decreased in the experimental group by application of the auricular acupressure therapy. Conclusion: Auricular Acupressure Therapy can be a better effective primary nursing intervention on smoking cessation for male adults in rural areas through reverification by a study of repetition.

• Journal of the Korean Home Economics Association
• /
• v.39 no.4
• /
• pp.49-59
• /
• 2001

Natural red and yellow dyestuff was extracted from safflower (Carthamus tinctorius Linnaeus) by a new process of cellulase extraction compared with the conventional hot water extraction. Dyestuffs were extracted from safflower easily and repeatedly by means of cellulose as safflower cell wall destroyer. It means that new dyestuff extraction by cellulase improves not only yields of dyestuff from safflower successfully but also the rate of repetition of extraction. From the above experiments, the conclusions of this study were summarized as follows. 1. The optimum conditions of dyestuff extraction from safflower by general extraction method were that the solvent was the water of pH 6.0 on yellow dyestuff and 3% $K_2CO_3$ solution on red dyestuff, extraction temperature was $55^{\circ}C$, and extraction time was 30 min. 2. Among various cellulase, the NOVO cellulase was the best cell wall destroyer of safflower and finally produced the largest amount of dyestuff from safflower by cellulase extraction method. 3. The optimum conditions of dyestuff extraction by cellulase extraction method were conducted on 10 unit of cellulase per gram of safflower at $100m{\ell}$ water of pH 5.0 at $50^{\circ}C$ for 30 min.

• Journal of Korean Academy of Nursing
• /
• v.36 no.8
• /
• pp.1374-1380
• /
• 2006

Purpose. This study was conducted to investigate the effectiveness of pelvic floor muscle exercise using biofeedback and electrical stimulation after normal delivery. Methods. The subjects of this study were 49 (experimental group: 25, control group: 24) postpartum women who passed 6 weeks after normal delivery without complication of pregnancy, delivery and postpartum. The experimental group was applied to the pelvic muscle enforcement program by biofeedback and electrical stimulation for 30 minutes per session, twice a week for 6 weeks, after then self-exercise of pelvic floor muscle was done 50-60 repetition per session, 3 times a day for 6 weeks. Maximum pressure of pelvic floor muscle contraction (MPPFMC), average pressure of pelvic floor muscle contraction (APPFMC), duration time of pelvic floor muscle contraction (DTPFMC) and the subjective lower urinary symptoms were measured by digital perineometer and Bristol Female Urinary Symptom Questionnaire and compared between two groups prior to trial, at the end of treatment and 6 weeks after treatment. Results. The results of this study indicated that MPPFMC, APPFMC, DTPFMC were significantly increased and subjective lower urinary symptoms were significantly decreased after treatment in the experimental group than in the control group. Conclusions. This study suggested that the pelvic floor muscle exercise using biofeedback and electrical stimulation might be a safer and more effective program for reinforcing pelvic floor muscle after normal delivery.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.333-335
• /
• 2001

The 2 GeV electron linac, the injector of the Pohang Light Source, was used as a photo-neutron source for radiation shielding research. The operational beam parameters are the nominal electron intensity of $0.5\;{\sim}5\;nC/sec$, the repetition rate of 10 Hz, and the beam pulse length of 1.0 nsec. One electron beam line was modified in order to install the target systems for producing pulsed photo-neutrons. The neutron spectrum and intensity were investigated by the time-of-flight technique. The reliable maximum energy of the measured neutrons was about 500 MeV. The number of neutrons above 20 MeV produced by one 1 GeV electron in a thick Pb target was about $6.45{\times}10^{-4}/sr$ at 90 degrees to the beam axis. The status of the photo-neutron source and the application research are presented.

• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.27-32
• /
• 2012

Transcranial magnetic stimulation requires an electric field composed of dozens of V/m to achieve stimulation. The stimulation system is composed of a stimulation coil to form the electric field by charging and discharging a capacitor in order to save energy, thus requiring high-pressure kV. In particular, it is charged and discharged in capacitor to discharge through stimulation coil within a short period of time (hundreds of seconds) to generate current of numerous kA. A pulse-type magnetic field is formed, and eddy currents within the human body are triggered to achieve stimulation. Numerous pulse forms must be generated to initiate eddy currents for stimulating nerves. This study achieved high internal pressure, a high number of repetitions, and rapid switching of elements, and it implemented numerous control techniques via introduction of the half-bridge parallel load method. In addition it applied a quick, accurate, high-efficiency charge/discharge method for transcranial magnetic stimulation to substitute an inexpensive, readily available, commercial frequency condenser for a previously used, expensive, high-frequency condenser. Furthermore, the pulse repetition rate was altered to control energy density, and grafts compact, one-chip processor with simulation to stably control circuit motion and conduct research on motion and output characteristics.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.3
• /
• pp.39-48
• /
• 2007

Due to the rapid proliferation of the web in recent years, many educators seek to improve the effectiveness of their instruction by providing innovative web-based course material to their students. Lots of web-based education contents are developed especially. They help to teach and train students. They expand widely due to repetition learning any time, any where. In this paper we implemented usage of C functions, quizes for checking comprehension of statements in C programming lecture and developed scenario helping concepts, algorithm comprehension. We made them web-based visual representation. They were implemented as FLASH animations or Java applets. They were well received by students.